• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.539-546
• /
• 2013

본 연구는 승마용 안전모의 신뢰성 확보를 위해 안전기준을 정립하기 위한 연구이다. 국내 외 레저 스포츠 안전모 관련 안전기준을 비교 분석하여 도출한 주요 시험평가방법을 현재 국내에 유통 중인 중저가 승마용 안전모를 대상으로 성능시험을 하였다. 충격흡수성 시험 시 1축과 3축 가속도 센서를 이용한 시험방법에 대해서 성능평가 데이터를 통해 1축 가속도 센서를 이용한 충격흡수성 시험으로 선정하였다. 유지시스템의 강도시험에서 헤드 폼 서포트 방식과 후크 서포트 방식으로 구분되던 것을 시료에 손상 없이 시험 가능한 헤드 폼 서포트 방식으로 결정하였다. 이와 같이 승마용 안전모의 안전기준을 정립하여 제품의 안전성 및 신뢰성을 확보하고 나아가 "품질경영 및 공산품 안전 관리법"에 규정함으로써 자국민의 안전을 확보하고 중국산 저가 제품에 대한 시장진입장벽을 구축하여 경쟁력 있는 안전모 시장을 구축하기를 기대한다.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.188-188
• /
• 2004

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.64-69
• /
• 2012

Head injury is one of the most common cause of deaths in car-to-pedestrian collisions. To reduce the severity of such injuries, many international safety committees have performed headform impact test for pedestrian protection. In this paper, an adult headform impactor model is developed based on the finite element (FE) method and validated through the numerical simulation. The skin material of headform impactor is known as polyvinyl chloride skin (PVC) and its material was assumed as viscoelastic. The viscoelastic parameters of headform skin are identified by a series of trial and error methods. The new developed FE adult headform impactor is verified by the drop test and FE JARI adult headform impactor provided by Madymo program.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1113-1118
• /
• 2010

It is requested that the interior compartment of a passenger vehicle must be satisfied with the FMVSS201U regulation, FMH impact test. It is needed the design methodology to find the appropriate structure about the FMH impact. When designing the impact-absorbing structure for the FMH impact test, it is to be noted that the impact absorber must have different performance considering the stiffness of the vehicle as the impact position and approach angle of FMH. In this study, an efficient design methodology was developed by using subcomponent collapse simulation instead of conducting full-vehicle simulation, thereby reducing the time and resources spent. Further, this unit-model simulation helps optimize the impact absorbing structure.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.567-573
• /
• 2015

In this study, volatile compounds in nine commercial Japanese distilled liquors (Shochu) were isolated by headspace solid-phase microexrraction (SPME) and analyzed by gas chromatography (GC) and GC-mass spectrometry (MS). A total of 76 volatile components, including 48 esters, 13 alcohols, and 15 miscellaneous components, were identified. Esters and alcohols constituted the largest groups of quantified volatiles. Differences in volatile components among the distilled liquors and possible sample grouping were examined by applying principal component analyses to the GC-MS data sets. The first and second principal components explained 77.92% of the total variation across the samples. The samples using barley koji showed higher overall concentrations of total volatile components. Additionally, the principal component analysis did not reveal any sample grouping based on the raw material used.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.