• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.234-240
• /
• 2014

Fluxapyroxad is classified as carboxamide fungicide that inhibits succinate dehydrogenase in complex II of mitochondrial respiratory chain, which results in inhibition of mycelial growth within the fungus target species. This study was carried out to assure the safety of fluxapyroxad residues in agricultural products by developing an official analytical method. A new, reliable analytical method was developed and validated using High Performance liquid Chromatograph-UV/visible detector (HPLC-UVD) for the determination of fluxapyroxad residues. The fluxapyroxad residues in samples were extracted with acetonitrile, partitioned with dichloromethane, and then purified with silica solid phase extraction (SPE) cartridge. Correlation coefficient($R^2$) of fluxapyroxad standard solution was 0.9999. The method was validated using apple, pear, peanut, pepper, hulled rice, potato, and soybean spiked with fluxapyroxad at 0.05 and 0.5 mg/kg. Average recoveries were 80.6~114.0% with relative standard deviation less than 10%, and limit of detection (LOD) and limit of quantification (LOQ) were 0.01 and 0.05 mg/kg, respectively. All validation parameters were followed with Codex guideline (CAC/GL 40). LC-MS (Liquid Chromatograph-Mass Spectrometer) was also applied to confirm the analytical method. Base on these results, this method was found to be appropriate fluxapyroxad residue determination and can be used as the official method of analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.88-96
• /
• 1972

1. The present paper deals with the contents of heavy metals such as mercury, cadmium, lead and copper in 17 species of edible seaweeds collected from Jumunjin, Pohang, Pusan, Chungmu, Yeosu and Wando areas. 2. The concentration of mercury in the air-dried seaweeds ranged from 0.02 to 0.52 ppm, as shown by the following species: 0.36ppm (0.09-0.50) in Enteromorpha spp., 0.25 ppm (0.14-0.31) in Undaria sp., 0.19 ppm (0.02-0.52) in Porphyra spp., and 0.10ppm (0.02-0.24) in Laminaria spp. in that order. If these concentrations are converted to the wet bases, they will be about 1/4 to 1/5 of the present levels. In general, the samples collected from the east coast showed relatively lower levels than those from the south coast. The mercury concentrations found in the Korean seaweeds are lower than the permissible levels reported. 3. The concentration of cadmium in the air-dried seaweeds ranged from 0.02 to 1.48 ppm, and the levels in the different species showed in the following order: 0.97 ppm (0.41-1.18) in Hizikia sp., 0.33 ppm (0.03-0.63) Undaria sp., and 0.32 ppm (0.04-0.67) in Porphyra spp. The concentration of cadmium in the samples on the wet bases become 1/4 to 1/5 of the present level. The laver Porphyra spp. collected from the east coast showed relatively lower levels than those of the cultured species along the south coast. All of the concentrations are still below than the permissible levels. 4. In general, lead concentration is 0.20-1.31 ppm which is lower than the permissible level. The concentration becomes about 0.05-0.3 ppm on the wet base. 5. Copper concentration ranged from 0.90-17.0 ppn on the dry base which is about 0.2-4.0 ppm on the wet base. It is interesting to note that the samples collected from Busan region showed relatively higher levels than those sampled from other regions.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.269-277
• /
• 2014

The multiclass pesticide multiresidue method for the simultaneous determination of diflubenzuron in agricultural products was conducted by using HPLC-UVD. The method was validated through the guidelines of linearity, specificity, limit of detection (LOD), limit of quantification (LOQ), accuracy and precision with pesticide-free spinach, Korean cabbage, eggplant, squash, sweet pepper, cucumber, Korean melon. The calibration curve of diflubenzuron was linear over the concentration range of 0.05-5 mg/kg with correlation coefficient of above 0.99999. The limit of detection and quantification was 0.008 and 0.02 mg/kg. Mean recoveries of diflubenzuron for each sample were 77.5-105.6%. Relative standard deviation (RSD) in recoveries were all less than 20%. The intra-day and inter-day precision (RSD) were 0.4-1.9% and 0.7-1.9%, respectively. The result of validation indicated that this method was accurate and rapid assay.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.183-187
• /
• 2004

Radioactivity in foodstuffs was surveyed for reference in amending regulation on the maximum permitted levels of radioactive contamination of foodstuffs. Most domestic and imported (?) foodstuffs were sampled, some domestic items collected around nuclear power plants to compare site-specific contamination. The collected samples were dried and ashed. Radioactivity in foodstuffs was measured using HPGe gamma spectrometer, Cs-137 activity ranged from 0.025-0.053, 0.045-0.500, 0.062-0.105, 0.025-1.151, 0.021-0.145 and 0.046-0.155 Bq/kg-fresh in cereals, pulses, mot vegetables (potato), ginsengs, meat, and marine products, respectively, with imported dried ginseng showing the highest radioactivity, Results reveal radioactivity in foodstuffs collected in 2002 is far below the maximum permitted levels of 370 Bq/kg. No significant differences were observed in radioactivity among sampling sites and between domestic and imported foodstuffs.

• Analytical Science and Technology
• /
• v.29 no.2
• /
• pp.57-64
• /
• 2016

Many phthalic acid esters (PAEs), including DMP, DEP, DBP, BBP, and DEHP, as well as DEHA are widely used as plasticizers in plastics. An analytical method was developed and used to analyze these compounds at 41 industrial facilities. The coefficient of determination (R²) for each constructed curve was higher than 0.98. The method detection limit (MDL) values were 0.4–0.7 μg/L for PAEs and 0.6 μg/L for DEHA. In addition, the recovery rate was shown to be 77.0–92.3%, while the relative standard deviation was shown to be in the range of 5.8-10.5%. DMP (n = 3), DEP (n = 2), DBP (n = 2), BBP (n = 2), and DEHA (n = 3) were detected in the range of 2.2-11.1% in the influent. DEHP was a predominant compound and was detected at > MDL in both the influent (n = 16, 35.6%) and the effluent (n = 4, 10.0%) at a high removal efficiency (92–100%). The highest levels of residue in industrial wastewater influent were 137.4 μg/L of DEHP at plastic products manufacturing facility, 12.5 μg/L of DEHA at a chemical manufacturing facility, and 14.0 μg/L of DEP at an electronics facility. The highest concentration of effluent was 12.5 μg/L of DEHP at a chemical manufacturing facility, which indicated that the effluent was below the allowable concentration (800 μg/L). Therefore, the levels of PAEs and DEHA that are discharged into nearby streams could not influence the health of the ecosystem.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.232-240
• /
• 2009

The aim of this study was to determine the processing and reduction factors for ginseng and its commodities during ginseng processing to obtain information of pesticide residue in ginseng. For this study, azoxystrobin was used in two field containing 6 years old ginseng plants. Ginsengs were harvested and processed to obtain different commodities (Dried ginseng, red ginseng and ginseng water and alcohol extracts, red ginseng water and alcohol extracts) for pesticide analysis. The amount of residue levels from wonju and icheon for fresh ginseng were 0.05, $0.03\;mg\;kg^{-1}$ dried ginseng were 0.12, $0.14\;mg\;kg^{-1}$, red ginseng were both $0.05\;mg\;kg^{-1}$, ginseng alcohol extract were 0.28, $0.33\;mg\;kg^{-1}$, ginseng water extract were 0.22, $0.16\;mg\;kg^{-1}$, red ginseng alcohol extract were 0.31, $0.20\;mg\;kg^{-1}$ and red ginseng water extract were 0.09, $0.11\;mg\;kg^{-1}$ respectively. These data were under MRLs notified by KFDA. The processing factors for ginseng products were 3.25, 1.34, 7.84, 4.63, 6.15 and 2.56 respectively. The reduction factors for ginseng products were 1.19, 0.51, 3.41, 1.91, 2.74 and 1.00 respectively. These data showed increment during processing which could be due to concentration but considering water contents, residue levels were similar or decreased than the initial residue level during processing.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.597-609
• /
• 2018

Korea Forest Service has supplied 76 industrial wood pellet boilers from 2011 to 2015 through subsidy programs. Since carbon monoxide (CO) and nitrogen oxides ($NO_x$) generated during boiler combustion are substances that lead to death in the case of acute poisoning, it is very important to reduce emissions. Therefore, the CO and $NO_x$ emission values of 63 boilers excluding the hot air blower and some boilers initially supplied were analyzed. The emission factor was also calculated from the measured exhaust gas concentration (based on exhaust gas $O_2$ concentration of 12%). The average value of CO emitted from industrial wood pellet boilers was 49 ppm and it was confirmed that the CO concentration was decreasing as the years passed. The emission factor of CO was 0.73 g/kg. The average value of $NO_x$ emitted from industrial wood pellet boilers was 67 ppm and the emission factor of $NO_x$ was 1.63 g/kg. Unlike CO, there was no tendency to decrease according to the installation year. Both CO and $NO_x$ measurements met the limits of the Ministry of Environment. These $NO_x$ emission factors were compared with the $NO_x$ emission factors produced by certified low $NO_x$ burners. The $NO_x$ emission factor of industrial wood pellet boilers was about 1.9 times that of certified low $NO_x$ LNG combustors and about 0.92 times that of coal combustion.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.182-185
• /
• 2011

This study was conducted to develop an appropriated management for safety of children snacks sold around school. Total 598 items as targeted food were collected; 66 biscuits, 320 candies, 57 chocolates, 40 ice creams and 115 beverages. Microbiological hazards such as total aerobic bacteria, Coliforms, Escherichia coli, Bacillus ceruse, Yeasts & molds were measured by analytical method in Korean food code. Total aerobic bacteria and Yeasts & molds were detected in cookies at the level of less than 2.69 and 2.65 $log_{10}$ CFU/g and the detection rates were 54.55 and 62.12%, respectively. Bacillus cereus was detected in 1 snack only at the level of 1.39 $log_{10}$ CFU/g but it was less than Korean microbial standards and specifications (3 $log_{10}$ CFU/g). Total aerobic bacteria and Yeasts & molds were detected in candies less than 2.86, 3.36 $log_{10}$ CFU/g and the detection rates were 46,8% respectively. Total aerobic bacteria, Yeast & mold were detected in chocolates at the levels less than 2.52 and 1.87 $log_{10}$ CFU/g and the detection rates were 33 and 22% respectively. Total aerobic bacteria in both ice creams and beverages were detected at the levels less than 3.39 and 1.35 $log_{10}$ CFU/g and the detection rates were 82 and 5% respectively. Coliforms were found in one ice cream (1.39 $log_{10}$ CFU/g) only. The result of this study indicated that all children snacks around school were suitable for microbial standard and specifications in Korean Food Code. However, since most children snacks around school are circulated without proper storage temperature and handing condition, consistent microbial management for children snacks are needed.

• Korean journal of communication and information
• /
• v.48
• /
• pp.46-62
• /
• 2009

The current study attempted to review the standards of retransmisison consent and arbitration for the terrestrial broadcasting signal. The standards are based upon the principles encouraged by the MIAC(Ministry of Internal Affairs and Communications). It has been criticized that the standards of judgement for the retransimission consent and arbitration are ambiguous and arbitrary in Japan. In 2009, MIAC announced five decisions regarding the retransmission of over-the-air. The result of the current study found that the regulations of compulsory over-the-air signal retransmission have been sustained until now. The retransmission policy of the Japan government based upon three principles; localism, proper cause and copyright act. The judgment is dependent on the intrepretation of MIAC's standard about these three principles.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.62-69
• /
• 2005

The purpose of this study has been performed to investigate the possibility of external audit program using thermoluminescence dosimetry for electron beam in korea. The TLD system consists of LiF powder, type TLD-700 read with a PCL 3 reader. In order to determine a calibration coefficient of the TLD system, the reference dosimeters are irradiated to 2 Gy in a $^{60}CO$ beam at the KFDA The irradiation is performed under reference conditions is water phantom using the IAEA standard holder for TLD of electron beam. The energy correction factor is determined for LiF powder irradiated of dose to water 2 Gy in electron beams of 6, 9, 12, 16 and 20 MeV (Varian CL 2100C). The dose is determined according to the IAEA TRS-398 and by measurement with a PTW Roos type plane-parallel chamber. The TLD for each electron energy are positioned in water at reference depth. In this study, to verify of the accuracy of dose determination by the TLD system are performed through a 'blind' TLD irradiation. The results of blind test are $2.98\%,\;3.39\%\;and\;0.01\%(1\sigma)$ at 9, 16, 20 MeV, respectively. The value generally agrees within the acceptance level of $5\%$ for electron beam. The results of this study prove the possibility of the TLD quality assurance program for electron beams. It has contributed to the improvement of clinical electron dosimetry in radiotherapy centers.