• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.172-176
• /
• 2011

'Suan' is a new $F_1$ hybrid variety of rapeseed (Brassica napus L.) with early maturing and high oleic acid. This hybrid variety was bred by the cross between Mokpo-CGMS (male sterile line) and 8516-B-5-6-5-3 (restore line) for the production of bio-diesel and edible oil in 2006. 'Suan' has green and parted leaf, yellowish flower, and black seed coat. 'Suan' is more tolerant to lodging and stem rot compared to 'Sunmang', check variety. The ripening date of 'Suan' is June 2nd which is 6 days earlier than 'Sunmang'. Yield trials were conducted from 2006 to 2007 and regional adaptation trials were examined at five locations each in 2008 and 2009. The average seed yield of regional adaptation trials was 381 kg/10a that was 4% higher than that of 'Sunmang'. Total oil content of 'Suan' was 44.3%. Oleic acid content was 68.3%, which is 5.2% higher than 'Sunmang' but, erucic acid was not detected. Total glucosinolate content was 2.31 mg/g. Therefore, this variety is recommended as a leading variety at southwestern area including Jeonnam, Jeonbuk and Kyongnam provinces of South Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.664-668
• /
• 2009

"Boram" is a new $F_1$ hybrid of rapeseed (Brassica napus L.) with early maturing, high yield and high oleic acid. This cultivar was developed from the cross between Mokpo-CGMS (male steile line) and 8634-B-1-3-1-8 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008 and regional adaptation trials were examined at four locations in 2008. "Boram" has green and parted leaf, yellowish flower, and black seed coat. The ripening period of "Boram" is similar to "Sunmang", but 3 days faster than "Tammiyuchae". The average seed yield of the regional adaptation trials was 424 kg/10a, which was 11 and 48% higher than "Sunmang" and "Tammiyuchae" variety. Total oil content of "Boram" was 44.2%. In fatty acid composition, "Boram" has no erucic acid. However, oleic acid content is 68.5%, which is 3.7 and 5.4% higher than "Tammiyuchae" and "Sunmang". And total glucosinolate content was 2.27mg/g. Therefore this variety is recommended as a leading variety at southwestern areas including Jeonnam, Jeonbuk and Kyeongnam provinces and Jeju island of Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.26-32
• /
• 2019

The purpose of this study is to improve the running speed on a small-radius curved section on an existing train line. When the transition curve was extended, and the amount of movement in the horizontal direction tended to increase as the curve radius increased. The amount of increase in the transition curve extension was lowest when extending the curve radius, and the amount of horizontal movement was the lowest when changing the curve radius to a cosinusoidal curve. As a result of applying the pass rate after improvement to the Kyeongbu line, there was a time-shortening effect of 9.4 to 11.6% and a facial expression speed increasing effect when the curve radius was fixed and the transition curve was changed to a sinusoidal curve. In conclusion, the most effective way to improve the running speed on an existing train route is to change the image to concrete and to change the relaxation curve to a cosinusoidal curve. The amount of horizontal movement of the track is small, and the speed improvement effect is excellent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.368-368
• /
• 2017

근대적 기상관측이 시작된 1905년 이후 우리나라의 연평균 강수량은 증가하고 있으나 강수량 변동폭 또한 커지면서 최갈수 기간의 영향을 받는 댐 등 대규모 수공구조물의 용수공급능력은 감소되고 있다. 또한 지역별 강수량과 인구 편차로 공간적으로 이용 가능한 수자원의 불균형이 발생하고 있어 지역적인 물 공급의 안정성과 형평성은 여전히 취약한 상황이다. 하지만 사회적 공감대 형성이 쉽지 않은 대규모 수자원개발 추진은 어려운 여건이며 국민들의 안전하고 맑은 물에 대한 수요 또한 지속적으로 증대되고 있어 이를 해소하기 위한 다각적인 대책 마련이 필요한 상황이다. 본 연구에서는 기 확보된 수자원의 효율적이고 공평한 활용을 위해 국내 용수공급의 중추적인 역할을 담당하고 있는 댐을 대상으로 댐간 연결을 통한 용수공급 방안을 제시하였다. 이를 위하여 소양강댐, 충주댐 등 다목적댐 16개 및 광동댐, 영천댐 등 용수댐 12개 총 28개댐의 용수공급능력 평가와 장래 용수수요량 조사를 실시하였으며 장래 용수부족 지역 해소를 위한 상시공급과 극한가뭄 등 재난 대처를 위한 비상시공급 방안을 검토하였다. 상시공급은 댐 용수공급능력 평가를 통하여 기본계획공급량 대비 여유수량을 갖는 댐에서 장래 용수수요 증가, 용수공급능력 감소 등으로 공급 용수가 부족한 인근 댐으로 공급하는 방식이며 용수 공급량은 저수지 모의운영을 통하여 양댐의 이수안전도(분석 기간중 1회에 한하여 물 부족 허용)를 충족시키는 수량을 산정하였다. 비상시공급은 타수계 및 근거리간 연결, 가뭄 예상지역을 기준으로 대상 댐을 검토하였으며 용수 공급량은 공급댐의 유지용수와 관개용수를 이용하여 공급받는 댐의 생 공용수 20% 공급가능시 공급량으로 산정하였다. 검토 결과 상시공급은 소양강댐에서 횡성댐으로 86천$m^3$/일, 장흥댐에서 주암본댐으로 127천$m^3$/일, 남강댐에서 수어댐으로 $140m^3$/일, 비상시 공급은 충주댐과 대청댐, 충주댐과 안동댐간 각각 500천$m^3$/일 공급을 통하여 장래 용수부족 지역의 물 부족 해소와 극한가뭄 등 비상상황의 대처가 가능한 것으로 분석되었다. 본 연구는 기후변화와 사회가치적으로 변화하고 있는 수자원 환경에 능동적으로 대처하기 위한 대책의 일환으로 고안된 것이며, 향후 유역간 물 이동에 따른 현행 수리권제도 및 어류, 수질변화에 따른 환경영향 등에 대하여 추가적인 연구가 필요할 것으로 판단된다.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.421-430
• /
• 2019

In this study, 195 pesticide residues in fruit samples (n=150) at local markets in Chungcheongnam-do Chungnam, Korea were monitored using a multi-residue method combined with GC-MS/MS and LCMS/MS. Among 150 fruit samples, 40 types of pesticides were detected in 63 samples and the detection rate was 42.0%. However, the amounts were below the maximum residue limit (MRL). Detection rates for pesticides in each thpe of fruit were as follows ; citrus fruits (55.2%), pome fruits (41.3%), berries (38.7%) and stone fruits (36.0%). Although the sample size was small (n=2), pesticide residues were not detected in tropical fruits. Occurrences of detection of pesticide residues in apple showed the highest level, and mainly, insecticides were detected most frequently. The most commonly detected pesticides residues were bifenthrin (21), pyraclostrobin (17), novaluron (13), boscalid (10), chlorfenapyr (9), trifloxystrobin (9), furathiocarb (9), acetamiprid (8) and chlorpyrifos (8). Five types of residual pesticides (bifenthrin, chlorfenapyr, deltamethrin, fenpropathrin and fenvalerate) were detected in quince, and out of these five, fenpropathrin exceeded the MRL based on the Positive List System (PLS). These results suggested that pesticide residues in fruit samples should be continuously monitored, although residue levels in 63 other fruit samples were evaluated as being within a safe level.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.520-520
• /
• 2016

석유 화학공장에서 발생하는 spent sulfidic caustic (SSC) 폐수는 액화석유가스(LPG)나 천연가스(NG)의 정제과정에서 발생되는 것으로 고농도의 sulfide와 cresylic, phenolic 그리고 mercaptan 등이 포함된 독성과 냄새를 유발하는 물질이다. 이러한 물질들은 LPG나 NG의 정제과정에서 높은 산도를 가진 휘발성 황화합 물질들을 제거하기 위해 사용된 NaOH가 $H_2S$와 반응하여 발생하는 것이다. 진한 갈색 또는 검은색을 띄는 SSC 폐수는 12 이상의 높은 pH를 가지고 있으며 5~12 wt%의 높은 염분도를 가지고 있다. 또한 강한 부식성과 독성을 가진 황화합물의 농도가 1~4 wt%이며, 방향족 탄화수소 물질 (i.e. methanethiol, benzene, tolune and phenol)들도 다량 함유되어 있다. 따라서 이러한 유해 물질들은 기존의 하수처리 공정으로 방류하기 전에 완벽하게 처리해야만 하수처리 공정의 오염 부하량을 줄일 수 있다. 습식산화공정은 SSC 폐수를 처리하기 위해 흔히 사용되고 있는 물리-화학적 처리 공정이지만 고비용, 고에너지가 필요하며, 고온 및 고압에서만 작동되어 안전상의 문제점을 갖고 있다. 또한 습식산화공정을 거친 폐수는 배출허용기준을 만족하기 위해 생물학적 2차 처리가 반드시 필요하다. 철-과산화수소를 이용하는 펜톤산화 공정, 그리고 sulfide를 sulfate로 전환시키는 생물학적 처리 공정은 황화합물의 완전한 무기물화가 힘들며, 현장 적용 시 기술적 경제적 부담이 크다. 이러한 단점을 극복하고, SSC 폐수를 효과적으로 처리하기 위해 본 연구는, 높은 흡착력과 광산화력을 가진 흡착광산화 반응 시스템(Adsorption Photocatalysis System, APS)을 개발하였다. APS는 SSC 폐수를 시스템 내부로 유입하여 수중의 오염물질을 흡착광산화제로 구성된 반응구조체가 흡착하고, 흡착된 오염물질을 UV에너지와 이산화티타늄 광촉매의 광화학반응에 의해 최종적으로 무해한 물질로 환원시키는 폐수처리시스템이다. APS의 반응구조체는 태양에너지 및 인공에너지원에 의해 활용 가능하며, 난분해성 유기화합물질을 물과 이산화탄소로 분해할 수 있는 친환경적이고 경제적인 소재로서 널리 쓰이고 있는 이산화티타늄 광촉매와 화력발전소의 높은 소성온도에 의해 연소된 후 발생되는 bottom ash를 이산화티타늄의 지지체로 사용하여 높은 흡착력과 광촉매 산화력을 가진 복합물이다. 개발된 APS에 의해 SSC 폐수를 처리한 결과, COD 86.1%, 탁도 98.4%, sulfide 99.9%의 높은 처리효율을 보여주고 있다. 따라서 본 연구를 통해 개발된 APS는 강한 부식성과 독성 그리고 높은 농도를 가지고 있는 SSC 폐수를 효과적으로 처리할 수 있다.

• Journal of the Korea Institute of Construction Safety
• /
• v.1 no.1
• /
• pp.47-56
• /
• 2018

In this paper, we analyze various cases of accidents caused by vehicle-mounted MEWPs(mobile elevated work platforms) which are most widely used for the high position level works, review the safety improvement measures for each of them, and propose basic data for the revision of related laws. The accidents by MEWPs were caused by the high level of works, which lead to fatal personnel accidents, so the measures for safety must be thoroughly carried out and the obligatory regulations by the related laws must be strictly observed. In this paper, we classify the cases of accidents at the workshop as 4 representative types and propose measures and remedies for them. According to the current regulations, it is possible to prepare for the accidents such as the wire rope breakage by switching to the all-chain drive method which does not have a daily use time limit instead of the wire rope drive method which is widely used at present. Also, it is suggested to add the daily use timetable to the nameplate attachment duty item according to the driving class.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.52-58
• /
• 2008

Mn-impregnated activated carbon (Mn-AC) prepared at different conditions was applied in the treatment of synthetic wastewater containing both organic and inorganic contaminants. Phenol and As(III) was used as the representative organic and inorganic contaminants, respectively. After evaluation of the physicochemical characteristic and stability of Mn-AC, oxidation of As(III) as well as adsorption of phenol by activated carbon(AC) and Mn-AC were investigated in a batch reactor. To investigate the stability of Mn-AC, dissolution of Mn from each Mn-AC was measured pH ranging from 2 to 4. Although Mn-AC was unstable at a strong acidic condition, the dissoluted Mn was below 3 ppm at pH 4. XRD analysis of Mn-AC indicated that the mineral type of the impregnated manganese was $Mn_2O_3$. From the simultaneous treatment of As(III) and phenol by AC and Mn-AC, As(III) oxidation by Mn-AC was greater than that by AC at lower pH, while the reverse order was observed at higher pH. After impregnation of Mn onto AC, 13% decrease of the surface area was observed, causing 8% reduction of phenol removal. Considering removal properties of As(III) and phenol, Mn-AC could be applied in the simultaneous treatment of wastewater contaminated with multi-contaminants.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2011

In this paper, the design procedure of substructure of the steel-type breakwater was described and the actual foundation design was performed for the test bed. The site investigation was executed at the Osan-port area, in Uljin, Gyeongbuk, where the steeltype detached breakwater is constructed. The foundation mainly depends on the lateral load and uplift force due to the wave force. Since the superstructure is stuck out about 9.0m from the ocean bed, the foundation must resist on the lateral force and bending moment. After considering various factors, the foundation type of this structure was determined by the steel pipe pile(${\varphi}711{\times}t12mm$). On the stability of pile foundation, the safety factors of the pile on the compressive, lateral and uplift forces were grater than the minimum factor of safety. The displacements of pile under the working load were evaluated as the values below the permissible ones. Based on the subgrade reaction method, we evaluated the relationship of subgrade reaction and displacement for the lateral and the vertical directions in the layers. The structural analyses along with the foundation were perfomed and the effect of pile foundations were compared quantitatively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.513-524
• /
• 2022

Recently, detecting damages of civil infrastructures from digital images using deep learning technology became a very popular research topic. In order to adapt those methodologies to the field, it is essential to explain robustness of deep learning models. Our research points out that the existing pixel-based deep learning model evaluation metrics are not sufficient for detecting cracks since cracks have linear appearance, and proposes a new evaluation methodology to explain crack segmentation deep learning model more rationally. Specifically, we design, implement and validate a methodology to generate tolerance buffer alongside skeletonized ground truth data and prediction results to consider overall similarity of topology of the ground truth and the prediction rather than pixel-wise accuracy. We could overcome over-estimation or under-estimation problem of crack segmentation model evaluation through using our methodology, and we expect that our methodology can explain crack segmentation deep learning models better.