• Title/Summary/Keyword: 허용한계

Search Result 541, Processing Time 0.032 seconds

Evaluation of SWMM Flood Model Application by Node Conditions (노드담수조건 설정에 따른 SWMM 적용성 평가)

  • Park, Jong Pyo;Won, Chang Yeon;Ju, Sung Sik;Hwang, Soo deok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.433-437
    • /
    • 2015
  • XP-SWMM은 유한차분방법에 의한 천수방정식을 기반으로 하는 TUFLOW 엔진을 탑재하여 1차원 솔루션 엔진과 동적으로 연결하여 범람원에서의 흐름거동을 2차원으로 해석할 수 있다. 유역에서 발생한 모든 유출량은 해당 소유역의 노드(맨홀)로 유입되며 2차원 침수양상은 관로상태에 따라 노드를 통해 역류한 유출수에 의해서 폰딩(Ponding)되는 조건으로 모의한다. XP-SWMM의 침수범람 모의는 침수범람 상황을 가시적으로 보여주는데 상당한 강점을 가지고 있으나 실제 지형여건에 따른 자연현상을 엄밀하게 모델링하는데 일정부분 한계가 있다. 모형의 한계는 담수된 노드의 수위로 인한 에너지 영향(오리피스 흐름)으로 인접관로의 침수가 부가적으로 유발할 수 있다는 점이며 실제 대부분의 경사지에서의 침수상황은 노드에 유출수가 담수되지 않고 하류로 지면을 따라서 확산(Diffusion)되어 담수영향으로 인한 인접관로 침수가 추가적으로 유발되지 않을 가능성이 매우 높다. 즉, XP-SWMM의 담수허용조건, 지반고 2D연결 옵션은 유역에서의 침수발생량을 과대평가 할수 있으며 특정 유역에서는 실제 침수발생 상황과 차이가 발생 할 수 있는 것이다. 본 연구에서는 서울시 광화문 일대의 효자배수분구 우수관로를 SWMM으로 구성하고 강우조건 95mm/hr에서 노드조건을 담수허용, 2D연결, 담수없음 조건으로 모형을 수행하여 침수모의 결과를 비교, 검토하였다. 전체관로 노드조건을 담수허용, 2D연결로 설정하게 되면 담수없음 조건과 비교하여 1.2-2.8배의 침수발생량이 추가로 발생하는 것으로 검토되었다. 즉, 담수없음 조건의 경우 침수발생시 노면 수위상승 인한 동수경사 영향이 반영된 압력관로 영향이 반영되지 않아 노드간 침수발생량이 중복되지 않는다. 반면, 담수허용이나 2D연결로 모형을 수행할 경우 지면의 경사가 충분히 있는 지역에 침수가 발생하더라도 일정 수심이상의 수두(동수경사선)가 형성되어 침수를 추가로 유발하는 것으로 보인다.

  • PDF

Influence of soybean cyst nematode on growth and yield of soybean (콩씨스트선충이 콩생육 및 수량에 미치는 영향)

  • Han S. C.;Cho H. J.
    • Korean journal of applied entomology
    • /
    • v.19 no.1 s.42
    • /
    • pp.31-34
    • /
    • 1980
  • In pot experiment, relations between soybean cyst nematode, Heterodera glycines, and growth and yield of soybean were followed. Soybean growth and nodule development in plots which inoculated more than 16 cysts were reduced greatly from two month after inoculation. Tolerance limit was about 20 cysts per 500g of soil at seeding period. There was $60\%$ loss of grain yield 낀hen nematode population was 1 cyst/g of soil at seeding period. Reproduction of soybean cyst :nematode was good when initial population had been low. So, the final population was no difference depend on inoculation density.

  • PDF

Review of Crash Landing Load Factor (추락착륙 하중배수에 대한 고찰)

  • Bae, Hyo-gil;Kim, Do-Hyung;Park, Jea Sung
    • Journal of Aerospace System Engineering
    • /
    • v.15 no.1
    • /
    • pp.47-55
    • /
    • 2021
  • When an abnormal landing occurs, aircraft structures should be designed to guarantee occupants survivability without preventing egress. To find out fire root causes at crash, lots of fixed aircraft crash tests were conducted. Appropriate crash load factors were established with the comprehension of structural behavior based on dynamic analysis and investigation of human tolerance. Cargo restraint criteria were set up considering passengers safety and operational cost while analyzing past cargo aircraft accident data using a probabilistic approach. Reviewing results of past crash tests, current crash landing load factor was appreciated physically, medically, and economically.

Impact Analysis of Complex Odor from Pigsty by Using ISCST3 (ISCST3을 이용한 돈사의 복합악취 영향 분석)

  • Kwon, Woo-Taeg;Hong, Sang-Pyo;Lee, Woo-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.12
    • /
    • pp.6602-6609
    • /
    • 2013
  • This study is expected to provide background data for establishing mitigation measures for malodor and for comparing complex odor criteria. The impact of malodor at the afflicted locations was analyzed using Industrial Source Complex Short Term 3 (ISCST3) model, which was recommended by the EPA. The Odor Emission Rates (ODR) for piglets and hogs were predicted based on the average, minimum, and maximum emission rates as classification. The forecasting result of the complex odor modelling of pigsty showed that tolerance limit was exceeded at an adjacent administration building, but tolerance limit was not surpassed at an afflicted location which was within 185m from the pigsty. The ISCST3 modelling of the satisfactory ODR for tolerance limit was accomplished at the administration building. From the prediction of this modelling, maximum emission rates based on 1hr at administration building were 10.59~52.93, 19.05~31.76, and 10.59 $OU/m^3/s/m^2$ at emission rates of 50%, 30%, and 10%. This emission rate was slightly higher than the tolerance limit of 10.00 $OU/m^3/s/m^2$. However, it was inferred that the tolerance limit could be satisfied if the emission rate of 10% was controlled.

Design Speed Guideline of Climbing Lane Based on Merging Characteristics (합류특성에 의한 오르막차로 설계속도기준 연구)

  • 김종표;장명순
    • Journal of Korean Society of Transportation
    • /
    • v.16 no.2
    • /
    • pp.67-76
    • /
    • 1998
  • 본 연구는 현행 오르막차로 설계기준이 적정한지를 검증하고 오르막차로 설계기준 제시에 목적을 두고 있다. 오르막차로와 본선에 대한 현장의 속도분포와 화물차량의 합류형태를 바탕으로 오르막차로 설계기준을 검증하고 개발하였으며, 주요 연구결과를 요약하면 다음과 같다. 첫째, 설계속도 120km/h에서 화물차의 50백분위비율과 85백분율은 각각 66km/h와 76km/h로 나타났기 때문에 현행 설계속도 80km/h 이상의 구간에서 화물차의 허용최저속도를 60km/h로 규정하고 있는 것을 설계속도 기준을 세분화하여 설계속도가 100km/h 이상인 구간에서는 화물차의 허용최저 속도를 70km/h로 함이 타당한 것으로 도출되었다. 둘째, 설계속도 80km/h인 구간에서의 화물차 허용최저속도는 60km/h로 규정한 것이 적정하다고 확인되었다. 셋째, 설계속도 80km/h 미만의 구간에서 화물차의 허용최저속도는 설계속도에서 20km/h를 감한값을 사용하는데, 이 때 20km/h 감속을 한계속도 기준으로 사용하는 것이 적정하다고 확인되었다.

  • PDF

A CAC Mechanism Considering Cell Delay Variation (셀 지연 변이를 고려한 연결 수락 제어에 관한 연구)

  • Kwak, Dong-Yong;Kwon, Yool
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1998.11a
    • /
    • pp.365-369
    • /
    • 1998
  • 본 논문은 CDV (Cell Delay Variation) 허용 한계 $\tau$를 지나치게 크게 설정함으로써 발생하는 대역의 비효율성을 줄일 수 있는 새로운 연결 수락 제어 알고리즘을 제시하고자 한다. 제안한 연결 수락 제어 알고리즘은 셀 지연 변이 허용 한계 T의 지나친 설정을 줄이기 위하여 CDV 측정 메커니즘을 사용하고 그리고 ATM 스위치에 심각한 영향을 주는 worst 트래픽을 효과적으로 제어하기 위하여 쉐이퍼를 사용한다. 또한, 제안된 연결 수락 제어 알고리즘의 성능 분석을 위해 기존의 방법과 시뮬레이션을 통해 대역 이용률에 대한 성능 분석을 수행하였다. 그 결과 제안 알고리즘이 대역 이용률에서 기존 방식보다 더 개선되었음을 확인하였다.

  • PDF

A Case study on the Application of Vibration Controlled Blasting Method (진동제어발파공법 적용 사례에 관한 연구)

  • 손영복;김재훈;원연호
    • Explosives and Blasting
    • /
    • v.21 no.3
    • /
    • pp.61-71
    • /
    • 2003
  • 최근 도심지 굴착공법 선정시 주변환경에 대한 관심이 높아지면서 민원발생을 감안하여, 발파공법이 아닌 기계굴착공법(TBM, SHIELD 등) 등이 부분적으로 적용되고 있다. 그러나 이들 굴착공법들은 굴착조건의 변화에 따라 적용 한계성이 있고, 한계구간이 직면할시 시공성이 극히 떨어지거나 적용 자체가 불가능하게 된다. 이에 따라, 공사기간의 연장, 공사비의 증가 및 적용자체가 불가 할 경우는 공사중단에 이르게 되어 시공과정에서 다른 굴착공법으로 전환되는 사례가 빈번히 발생되고 있다. 따라서 본 사례는 도심지 터널구간으로 당초 할암공법으로 설계되었으나 암반의 강도가 높고 굴착단면적이 협소하여 할암공법이 적용될 수 없었다. 이에 대한 대안공법으로 TBM이나 기타 장비에 의한 기계굴착공법을 검토하였으나, 터널연장이 짧고 터널노선의 곡선부 반경이 작아 대형장비의 투입이 어려운 굴착조건 때문에 최종적으로 폭약을 이용한 발파굴착 공법을 선정하였다. 그러나 발파공법은 진동 및 소음이 필연적으로 수반되기 때문에, 주변 환경공해가 허용하는 범위 내에서 최대한의 시공성과 안전성 여부를 판단하기 위하여 발파진동 및 소음의 허용수준을 설정한 후 시험발파를 실시하였으며, 그 결과에 따라 진동제어발파공법을 적용하였다.

An Authentication Scheme using the Fault-Tolerant System (결함-허용 기법을 이용한 신분확인 방안)

  • 공병운;이경현
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2000.11a
    • /
    • pp.538-541
    • /
    • 2000
  • 본 논문에서는 인터넷과 같은 가상 공간에서 사용자의 신분을 확인하기 위해서 길함-허용기법을 이용해 본인의 신분을 확인하는 인증 기법을 제안한다. 제안 기법은 기존 패스워드 기법에 의존하는 신분 확인 기법을 다수의 질문-응답 기법으로 전환하므로써 인간의 기억력 한계와 패스워드 강도 사이의 trade-off를 고려한 방안으로 다양한 질문의 형태에 따라 확률에 근거하여 신분을 확인하는 방안으로 가상 공간에서의 인터넷 뱅킹 및 다양한 전자상거래 응용 등에 직·간접적으로 활용될 수 있다. 또한 실용적인 측면의 응용을 위해 다양한 종류의 질문을 구성하여 이에 대한 경험적 정답 확률을 고려한 신분 확인 확률도 산출하였다.

  • PDF

Fire and Evacuation Simulation Analysis of Large-Scale Domestic Data Centers (국내 대규모 데이터센터 화재 및 피난 시뮬레이션 분석 )

  • Kim, Dong-Min;Go, Eun-Seong;Park, Hyeong-Gyoon;Gwak, Ji-Hyeon
    • Proceedings of the Korean Society of Disaster Information Conference
    • /
    • 2023.11a
    • /
    • pp.347-348
    • /
    • 2023
  • 본 논문에서는 실제 규모 데이터센터의 3D 모델링을 기반으로 대상 공간별 화재 시나리오를 선정하여 화재 및 피난 시뮬레이션을 수행하였다. FDS와 Pathfinder는 full coupling 방식을 사용할 수 없는 한계가 있으며 semi coupling의 경우 가시화에는 도움이 되나 결과에 영향을 주지 않는다. 따라서 재실자의 피난 상황 시 경로에 대한 안전성과 화재 위험 노출 정도를 시각적으로 분석하는 것이 가능한 semi coupling과 시뮬레이션 결과 데이터 분석을 병행하여 수행하였다. 전산실의 경우 서버의 기능상실 한계 온도가 32도이기 때문에 서버 기능 정지 상황에 도달하는 시간을 중점적으로 분석하였다. 전산실은 업무 및 고객 서비스와 관련된 모든 데이터들을 저장하기 위해 항시 기동 되어야 하는데 전산실 내 화재가 발생할 경우 1~2분 이내 서버 기능이 정지되는 상황이 발생하였다. 따라서, 서버가 안전하게 계속 동작하기 위해서는 전력 계측 및 제어 케이블 열화, 서버 장치의 건전성이 유지되어야 하며 초기 화재를 빠르게 감지하여 진압하여야 한다. 피난 시뮬레이션의 경우 가시도를 상실하게 되는 시간이 약 195초(5m 미만) 인근으로 인원이 해당 층을 완전히 벗어나는 데 걸리는 시간이 약 125.6초였던 것을 보면 대피하기에 충분한 허용 피난시간(ASET)을 확보하고 있음을 알 수 있었다.

  • PDF

Analysis of Prestress Effect and Reliability of PSSC Composite Girder Bridge (PSSC 합성거더 교량의 프리스트레스 효과 및 신뢰도 해석)

  • Hwang, Chul-Sung;Paik, In-Yeol
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.12 no.6
    • /
    • pp.214-224
    • /
    • 2008
  • Member force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.