• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.126-128
• /
• 2012

소프트웨어 시스템의 안전성을 보장하기 위해 여러 안전성 분석 기법들이 사용되고 있으며, 안전성 분석의 결과인 안전성 요구사항을 시스템이 만족하고 있는지 확인하는지 확인하는 안전성 평가과정이 수행되고 있다. 안전성 평가는 많은 시간과 비용이 드는 문제점을 가지고 있다. 본 논문은 안전성 평가에 드는 시간과 비용을 줄이기 위해 테스트 케이스를 이용하여 안전성 요구사항을 소프트웨어 개발의 가장 기본적인 검증기법인 테스팅을 이용하여 시스템이 만족하는지 확인하는 방법을 제안하고 핸드폰의 카메라 컨트롤러 예제를 이용한 사례 연구를 진행하였으며 이를 지원 위한 도구인 TC2SMV를 개발하였다. TC2SMV는 UML의 state chart diagram에서 생성된 test case들을 SMV 입력 프로그램으로 자동으로 변환하여 사용자가 SMV 모델체킹을 수행할 수 있는 환경을 제공한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.119-124
• /
• 2017

Machining optimization using typical computer-aided manufacturing (CAM) software mainly depends on tool paths, and it is impossible to predict the behavior of material or cutting force. In this paper, cutting force analysis simulation is performed on the Unibody Case of a mobile phone with the aim of optimizing cutting-force-based machining using the Third Wave Systems' AdventEdge Production Module. Machining time after optimization was shortened by 42% for roughing compared to pre-optimization, and actual machining time was reduced by 36.8%. For finishing, machining time was reduced by 92%, and actual machining time was reduced around 90%. A surface roughness analysis found that the post-optimization surface roughness was $1.16{\mu}m$ Ra, compared to a pre-optimization value of $1.75{\mu}m$ Ra.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.83-89
• /
• 2022

For the purpose of promoting the excellence of Korea's unique traditional hanji around the world, it was intended to promote 'modernization of tradition' by producing and presenting cultural products suitable for modern sensibility using traditional hanji which is widely used in the arts. First of all, using hanji as a material, jumchi hanji was made by jumchi technique. Cut to a certain width according to the cultural products such as laptop case, cell phone case, hat, and bag. Weave the cut jumchi hanji with plaine weave, twill weave, and hexagon depending on the purpose of the cultural products to be made. A cultural products were made by matching the woven jumchi hanji with artificial leather, cotton, and denim.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.53-53
• /
• 2008

기존의 Al 합금 소재의 단점을 보완한 Al-Mg 합금 소재를 이용해 다이캐스팅으로 만들어진 핸드폰 케이스에 적용하고자 titanium 타겟을 사용한 반응성 스퍼터링 공정을 연구하였다. 코팅특성은 스펙트로포토 미터를 이용하여 색상분석을 하였고, 미세표면이미지는 FE-SEM을 이용하였다. DC 마그네트론 스퍼터링에 의한 착색코팅은 산소유량이 많은 경우 밝기 L*값이 더 커졌다. 색상의 편차와 재현성을 나타내주는 ${\Delta}E^*ab$ 값을 비교해보면, 모든 경우 ${\Delta}E^*ab^*$<1로 매우 우수한 색상균일성을 보여준다. FE-SEM에 의한 표면이미지는 전반적으로 산소유량이 많은 0.8SCCM에서 코팅한 경우보다 산소유량이 적은 0.375SCCM에서 코팅한 경우가 결정립계의 구별이 확실하고 결정립 모양이 선명하고 결정립크기도 증가함을 확인할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.418-424
• /
• 2017

Magnesium has a higher specific strength than other metals and is widely used industry wide due to its excellent vibration absorption ability and electromagnetic wave shielding property.For example, it is used for automobile parts such as car seat frames and cylinder heads, and is widely used in electronic products such as notebook cases and mobile phone cases. In addition, it is in the spotlight as a bone-implant material used to assist in the treatment of damaged bones when the bones are cracked or broken. Currently, Ti alloy, stainless steel and Co-Cr-Mo alloy are used as the implant material, and the Mg alloy remains in research stage. The current problem with bone implant implants is that the patients must undergo reoperation to remove the implants after joint surgery. Magnesium, however, can achieve sufficient strength compared to current materials. In addition, since it is self-decomposed after the recovery, reoperation is not necessary. In this paper, Mg alloys were designed by adding harmless Ca and Zn to the human body. In order to improve the strength and corrosion resistance, the final alloy was designed by adding a small amount of Sr as a grain refiner. The radioactive elements of Sr are harmful to the human body, but other naturally occurring Sr elements are harmless. Microstructure analysis of the alloys was performed by optical microscopy and scanning electron microscopy. The mechanical properties and corrosion characteristics were evaluated by tensile test, potentiodynamic test and immersion test.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.42-50
• /
• 2008

We developed a visual inspection system for detecting defective products. Most existing inspection systems are designed to be dedicated to one product, which makes operator spend extra money and time to adopt other products. In this work, we propose a flexible visual inspection system that can inspect various products without any additional major job at a low-cost. The developed system contained image processing algorithm libraries and user-friendly graphic interface for adaptable image-based inspection system. We can find a proper threshold value using the proposed algorithm which uses correlation coefficient between a non-defective product and existing sample images of defective product. And We tested the performance of the proposed algorithm using Otsu's method. The proposed system is applied to a automated inspection line for cellular phone.