• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.640-646
• /
• 1998

Nucleation and crystallzation of a quaternary glass system for lead titanate glass-ceramics were in-vestigated using DTA(differential thermal analysis ) with variation of nucleation temperature and crystal growth time. Glass samples containing 60mol% of PbO-{{{{ { TiO}_{2 } }} were prepared from melts by the conventional normal cooling method in a cylindrical brass mould. The glass sample was nucleated between 40$0^{\circ}C$ and 50$0^{\circ}C$ for a given time and showed the maximum nucleation rate at 46$0^{\circ}C$ The DTA crystallization peak temperature decreased with increasing nucleating time and decreasing heating rate during DTA runs which indicated an increase of the number of nuclei produced in the system.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.974-978
• /
• 1998

The kinetics of crystal growth and nucleation in dependence on the supersaturation of an aqueous solution of 3-nitro-1,2,4-triazol-5-one(NTO) were evaluated on the draft tube-baffle(DTB) crystallizer operated batchwise. The crystal growth rate is proportional to the supersaturation to the 2.9 power, and the nucleation rate to the 4.2 power. The uncleation behavior for NTO-water system in DTB crystallizer was grasped according to Mersmann's criteria. The nucleation in this crystallizer was found to act with heterogeneous nucleation and surface uncleation simultaneously. Simplified relation was derived for calculation of mean crystal size of product crystals from the batch cooling crystallizer. The obtained relation was verified by a set of experiments.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.19-26
• /
• 1992

The rate of tungsten nuclei formation from $WF_6-SiH_4$ on silicon dioxide surface was measured. The nucleation rate became faster at high deposition temperature, low carrier gas flow rate and high deposition pressure. Also the rate became faster at the downstream of the oxide surface compared to the oxide surface near the inlet. Shape and cross-sectional view of the tungsten nuclei were observed with SEM and their chemical compositions were also determined.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.198-203
• /
• 2012

Salting-out technique was adopted to crystallize dye crystals from dye solution. In this research solubility of dye solution and crystallization kinetics of Reactive dye (RB-8, RB-49, RR-218) was investigated. The empirical expressions of salting-out crystallization kinetics for Reactive dye (RB-8, RB-49, RR-218) in continuous MSMPR crystallizer was RB-8 in crystal growth kinetics $G=7.1{\times}10^{-4}{\Delta}C^{0.67}$ and nucleation kinetics $B^0=3.1{\times}10^{15}{\Delta}C[1.2{\times}10^{-8}+{\Delta}C^{0.7}M_T{^2}]$, RB-49 in crystal growth kinetics $G=5.2{\times}10^{-4}{\Delta}C^{0.3441}$ and nucleation kinetics $B^0=7.2{\times}10^{15}{\Delta}C[3.3{\times}10^{-8}+({\Delta}C)^{0.7}M_T{^2}]$, RR-218 in crystal growth kinetics $G=4.4{\times}10^{-4}{\Delta}C^{0.2361}$ and nucleation kinetics $B^0=6.3{\times}10^{15}{\Delta}C[7.9{\times}10^{-8}+({\Delta}C)^{0.7}M_T{^2}]$. Also, comparison of calculated crystal size distribution applying to characteristic curve method with experimental crystal size showed good agreement.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1221-1232
• /
• 1996

용접부 인성을 향상시키기 위해 Ti 산화물을 첨가한 Ti 산화물강에 대하여 용접시 최고가 열온도와 냉각속도의 변화가 용접열영향부의 미세조직에 미치는 영향을 조사하였다. 용접열영향부의 인성향상에 기여하는 acicular ferrite는 140$0^{\circ}C$ 이상의 최고가열온도와 $\Delta$t800-500가 40초보다 빠른 냉각속도에서 활발해 생성되었다. 오스테나이트 결정립내에서 개재물로부터 핵생성된 일차 acicular ferite의 생성량은 전체 aicular ferrite의 약 20% 정도로 적었으며 대부분의 acicular ferrite는 일차 acicular ferrite로부터 생성된 이차 acicular ferrite인 것으로 나타났다. 이차 acicular ferrite는 plate사이에 Fe3C층이 존재하는 것으로 보아 확산기구에 의해 생성되는 것으로 생각된다. 개재물은 TiO, TiO2, TiN, MnS, AI2O3 MnO(galaxite)등으로 구성된 복합상이었으며 개재물이 일차 acicular ferrite의 핵생성 site로 작용하기 위해서는 약 1$\mu\textrm{m}$이상의 크기가 효과적인 것으로 나타났다. Ti 산화물과 TiN는 직접적인 acicular ferrite의 핵생성 site로 작용하기보다는 MnS, galaxite 등의 석출 site로 작용하여 개재물의 크기를 증가시킴으로써 acicular ferrite의 생성을 촉진시키는 것으로 생각된다.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.153-157
• /
• 2003

본 논문은 레오캐스팅용 AZ91 합금 슬러리를 제조하는 새로운 방법에 관한 것이다. 그 원리는 AZ91 합금 액상에서 Mn의 용해도차에 의해 생성되는 $Al_8(Mn,Fe)_5$ 정출물을 ${\alpha}-Mg$ 초정 생성을 위한 불균일 핵생성 자리로 사용하고자 하는 것이다. 제조된 슬러리의 미세조직 분석결과 $Al_8(Mn,Fe)_5$ 정출물이 ${\alpha}-Mg$ 내에 위치하고 있어, 이로부터 정출물이 효과적으로 불균일 핵생성 자리로 작용하고 있음을 알 수 있었다. 또한 Mn 함량의 증가는 $Al_8(Mn,Fe)_5$ 정출물 수를 증가시켜 고상분율이 일정할 때 슬러리 내 ${\alpha}-Mg$ 고상의 크기를 감소시키고 구형도를 향상시킨다. 이외에도 냉각속도 및 유지시간이 슬러리 미세조직에 미치는 영향에 대해서도 보고하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.207-212
• /
• 2008

This study focused on shorten the period of the struvite crystal birth and development by adding seed materials. For this purpose, three different seed materials were selected: sand, anthracite and struvite. The experiments has been conducted to evaluate the effect of the particle size of the selected seed material on the struvite crystallization, and to study the mixing effect which can be expressed by the value of $G{\cdot}t_d$(the multiple of mean velocity gradient(G) and mixing time($t_d$)). It was observed in this study that the removal efficiency of ammonia nitrogen increased by 9%, 11%, and 20% for sand, anthracite, and struvite added as the seed material, respectivley. This indicated that the struvite crystallization efficiency had a close correlation with the specific surface area of the seed particle. It was found that when struvite was selected as the seed material, the struvite crystallization proceeded at lower $G{\cdot}t_d$ value as compared with other seed materials. This observation implied that the secondary crystal birth would be dominated in this reaction. It was concluded in this study that the particle size was not significant factor on the struvite crystallization, while the $G{\cdot}t_d$ value was a considerably important factor in terms of the theory of the struvite crystal birth.

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.443-451
• /
• 1992

Effects of various pretreatments on the nucleation of CVD-W deposited on the reactively sputter-deposited TiN was investigated. Incubation period of nucleation and deposition rate decreased by the pretreatment of Ar rf-sputter etching for the depth below 300k, but they increased for the etchig depth over 200A. The preteatment of Ar ion implantation decreased the incubation period of nucleation, but increased deposition rate. Also Si$H_4$flushing pretreatment decreased the incubation period of nucleation slightly due to the absorption of Si by TiN surface.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.618-624
• /
• 1989

Ultrasonically induced bubble formation in thermoplastic matrix was investigated experimentally and theoretically. polystyrene was saturated with nitrogen under the pressure of 0.2 to 3.45 MPa in a pressure chamber, followed by pressure release and ultrasonic bubble nucleation. Zinc stearate was added to polystyrene as the nucleating agent to induce heterogeneous nucleation. Various mixture of low density polyethylene and polyethylene wax was also saturated with the gas. The foamed specimens with or without ultrasonically induced bubble nucleation was modeled by modifying the classical nucleation theory. The rate of ultrasonic nucleation was predicted for homogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous nucleation must be employed for ultrasonic production of bubbles in a viscous fluid and the homogeneous nucleation for ultrasonic production of bubbles in a low viscosity fluid.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.97-100
• /
• 2002

PVDF를 전장하에서 용융결정화 하는 경우에 전장의 세기가 증가할수록 전기적으로 불활성인 $\alpha$-결정의 핵생성속도는 지연되는 반면에 전기적으로 활성을 갖는 ν-결정의 핵생성은 빨라지는 것으로 Stein 연구그룹이 일찍이 보고한 바 있다. [1,2] 그러나 실제로 PVDF를 용응 결정화하는 경우에는 결정화온도가 그다지 낮지 않는 경우에는 $\alpha$-결정과 ν-결정이 혼재되어 나타나기 때문에 외부 전장하리서의 용융결정화시에 외부전장의 세기가 $\alpha$-결정과 ν-결정의 핵생성속도 및 성장속도에 미치는 영향을 분리하여 해석한 논문은 거의 없다. (중략)