• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.570-576
• /
• 2018

In reinforced concrete structures, the joints of ordinary rebars are usually lap joints, which are bound by binding wires with rebars, and mechanical joints by couplers. In domestic design standards (concrete design code), welded lap joints are restricted for ordinary rebars, but overseas standards allow welded lap joints of ordinary rebars through pre-heating. This study investigated the domestic and international standards/criteria and evaluated the fracture strength by performing the tensile test on the lap welded joint of SD400 grade rebars, which is used the most in the construction sites. The weld length of the specimen for weld lap joints is based on the minimum weld length (8d) given in the KS standard (KS B ISO 17660-1). According to AWS D1.4, the preheating temperature was set to $150^{\circ}C$ for D19 and below, and $260^{\circ}C$ for D22 and above. In the test results, the tensile strength of rebars with welded lap joints exceeded the required strength (125% of the yield strength) according to the concrete design code. To analyze the effect of preheating, the tensile strength of the welded rebars after preheating was not significantly different from that of the welded rebars without preheating. The carbon equivalent content (Ceq) of the rebars used in the test was 0.45% or less. Under AWS D1.4, no preheating is required if the carbon equivalent is less than 0.45%. All specimens with a welded lap length of 8d failed by a bar fracture. The effect of preheating was confirmed to be insignificant due to the low carbon equivalent of the rebar.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.479-485
• /
• 2004

The interest of ACT (Automated Container Terminal) is increasing because of expansion of container's transportation quantity, appearance of large-sized and. high-speed vessel, high labor cost of container terminal and the change of technical level. Therefore, the ACT had been developed in several ports in the world, such as ECT (Europe Combined Terminals) and CTA (Container Terminal Altenwerder). They have studied detailed technique for the operation of ACT. In Korea, it also has increased not only expansion and improvement of container terminal, but also necessity of ACT. Now, many projects related to the development of ACT are working in Korea. And the technical improvement of operating system, automated equipments and information system has accomplished by the projects. The ACT consists of the basic equipment and the integrated information system for operating and controlling automated equipments. The productivity of ACT is maximized through efficient connection between them. Thus, the automated degree of container terminal is dependent on the developing time of operating system, reliability, transportation quantity of container, investment amount and technical level. In this paper, we propose important strategy in developing ACT through analyzing the property of each ACT.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.137-147
• /
• 2020

With the acceleration of economic globalization, the development of aviation logistics plays an increasingly significant role in the logistics industry. As the foundation of aviation logistics development, airport terminals are attracting increasing attention. In this respect, the aim of this research is to analyze 65 academic papers on Chinese airport terminals from 2003 to 2020 by utilizing analytic keywords of academic papers and suggest the research trend of Chinese airport terminals. The SNA was adopted as research methodology. Airport Terminal, Boned, and Chinese Mainland were the keywords for the first period (2003-2008), while the second period (2009-2014) included the keywords such as China, DEA, Airport, and Flight Delay. For the third period (2015-2020), Airport Competitiveness and Aviation Network were also highly connected keywords. This indicates that with the growth of the economy, the research trend of China's airport terminals has been gradually expanding from infrastructure construction to network development. The results have implications on suggesting the research trend of Chinese airport terminals, and providing insights to the policy makers, academics, and practitioners in neighboring countries including Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.3
• /
• pp.50-63
• /
• 2014

Since the new millennium, BIM has been widely adopted to improve productivity in the field of architecture, engineering, and construction with the government policies of each country. After its first introduction into the field of landscape architecture in USA, BIM has been debated on its merits and limitations mainly by the European countries' academic and, at the same time, practical worlds. However, little attention has been paid to BIM, in particular, in the field of landscape architecture in Korea leaving many issues to solve to fully utilize BIM. The purpose of this study is to present the main issues and strategic agenda for the successful introduction of BIM in landscape architecture in Korea. This study shows that the new derived word of LIM(Landscape Information Modeling) instead of BIM appeared in the field of landscape architecture. Then, this paper discusses the main issues on standardization and interoperability in the adoption of LIM to create, integrate, and reuse landscape information. Finally, four strategic agenda are presented to successfully introduce LIM into the domestic field of landscape architecture by reviewing the societies of the landscape discipline in UK and Norway that play a leading role by organizing BIM working groups.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.167-184
• /
• 2016

This paper investigates the migration process of Korean population in Northeastern China since the 19th century, focusing on the population distribution patterns in different time periods which reflect changes and diffusions of diaspora space. Korean migration into Northeastern China seemed to begin from the late 19th century, and can be classified into four different periods including cross-border refugee period (19th to 1910), political exile period(1911-1931), forced migration period(1932-1945), and economic-driven migration period(after 1946). The Korean migration into Northeastern China was closely related to paddy field rice farming by Korean migrants, which can be interpreted as a process of contagious diffusion starting from border area between Korea and China at the early stage. And then, process of hierarchical diffusion occurred along with urban centers on the railways from the 1930s. At the later stage, Korean migration has extended to coastal urban centers, other big cities in China and other countries including Korea since the 2000s. Recently, ethnic Korean communities in China have experienced changes from rural village based community to urban district based community as well as from single-nuclei ethnic structure around Northeastern China toward multi-nuclei ethnic structure extending to coastal urban areas in China.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.101-111
• /
• 2015

The Emirate of Abu Dhabi is swiftly rising into a newly industrialized country by achieving economic prosperity among the Islamic cultural regions of Middle East and North Africa(MENA). Abu Dhabi Emirate is performing the conversion from oil economy to non-oil economy and the sustainable urban development policy. However, there are various social and environmental problems in Abu Dhabi. In order to solve the urban problems caused by the rapid economic growth and the changes in society and environment, Abu Dhabi is recognizing the importance of spatial information and triggering the establishment of spatial information. Spatial information is regarded as a basic infrastructure for urban construction and enlarged as a blue ocean market in Abu Dhabi. However, the base of spatial data infrastructure in Abu Dhabi is not well managed in comparison to that of Korea. Especially, Abu Dhabi has some characteristics that it depends on foreign multinational companies and it does not have its own systemic organization and law system. To advance into Abu Dhabi spatial data market under-controlled by global vendors, it is necessary to identify the advantage and disadvantage on spatial data infrastructure of Abu Dhabi and required to establish the advance methods into niche markets by considering priority order of spatial information. Thus, this study aims to analyze the gap of spatial information between Abu Dhabi and Korea and suggest the short and long term development methods for spatial data infrastructure of Abu Dhabi. The results of gap analyses will be the milestone for Korean companies' advance into MENA.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.5
• /
• pp.431-443
• /
• 2014

In this paper case studies of artificial ground freezing, which have not been applied in Korea, have been investigated for the water cut-off in a subsea tunnel under high water pressure and the most commonly used cooling mediums of brine and liquid nitrogen are examined. Since sea water with pressure has the lower freezing point than pure water, the lower temperature cooling medium is required in the application of subsea tunnel. Also, the cooling medium must have refrigeration safety and is able to reduce executing time. Brine freezing system can reuse cooling medium and is safer than liquid nitrogen freezing. But it takes more time to freeze ground and needs complex circulation plants. On the other hand, liquid nitrogen freezing system can't recycle cooling medium and may cause breathing problems or asphyxiation through oxygen deficiency. But, freezing with liquid nitrogen is fast and requires simple refrigeration equipment. Principal elements of design for ground freezing in subsea tunnel have been extracted and these elements are needed further research.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Proceedings of the Technology Innovation Conference
• /
• 2003.06a
• /
• pp.116-135
• /
• 2003

우리나라는 최근에 IMF 에 재정적 지원을 요청하는 상황이 계기가 되어 국가경쟁력과 삶의 질 측면에 상당한 관심을 가지게 되었다. 이러한 환경변화는 사회저변에 효율성을 강조하는 풍토를 확산시키고, 위기상황의 재발방지를 위해 그 원인을 분석하고 대안을 마련하는 등 사회 전반적으로 각고의 노력을 촉발시키게 하는 계기가 되었다. 이러한 논의들 중에 눈에 띄는 한가지는 과학과 기술사이의 관계에 관한 논쟁인데, 최근에 활발히 논의되고 있는 과학과 기술사이의 연계는 미국을 중심으로 많은 연구가 진행되고 있으며, 이러한 연구들은 대체적으로 과학과 기술사이에는 상당한 정도의 상관관계가 있고, 이 둘 사이는 서로 상호작용하면서 경제성장을 이끄는 역할을 한다고 주장하고 있다. 본 연구에서는 이러한 논의들을 국내에 적용시킴으로써 해외의 사례가 우리에게 시사점이 될 수 있는지 체계적으로 분석하려고 시도하였다. 과학과 기술사이의 연관성을 알아보기 위하여, 과학의 연구성과를 대변하는 대용치로 SCI논문을 사용하였고, 이러한 연구성과가 얼마만큼 사회에 파급되어 산업화 또는 상업화되었는지를 측정하기 위해 특허출원수를 추출하여, 연구의 목적에 맞게 modify 하는 과정을 거쳤으며, 추세분석과, 상관관계분석 그리고 회귀분석을 실시하였다. 본 연구는 실증분석을 통하여, 과학과 기술사이에는 일부 소수의 영역을 제외하고 매우 높은 상관관계가 있음을 발견하였고, 우리나라의 주력산업이었던 기계분야의 쇠퇴를 실증적으로 확인 할 수 있었으며, 정부의 적극적인 지원아래 폭발적으로 성장하였던 IT분야의 증가추세를 확인할 수 있었다. 따라서 본 연구에서는 국가경쟁력의 근간이 되는 연구개발부문에 경제논리를 배제하는 지속적인 투자를 제언함으로써, 국가경쟁력 제고와 삶의 질 향상이라는 두 마리 토끼를 잡을 수 있는 방안은 과학과 기술의 유기적인 연계에 있음을 밝히고 있다. 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.747-758
• /
• 2006

With the growth of economy, the esthetic values of bridges become significant points in the decision process of a type of new bridges. So, it is common that a long-span bridge or a multi-purpose bridge are selected as the type of new bridges. Also, the economic growth derives increase in traffic and then the increased traffic derives multi purpose bridges from the decision process of bridge types. In the multi-purpose bridges with private fund, the construction cost is simply alloted to several organizations according to the percentage of participation and usage. But the allotment of the maintenance cost is not simple. Because the loads and safety factors in design are different between the criterion of design of highway bridges and that of railway bridges. In this study, we verify the possible problems in case of allotment method of maintenance cost in foreign examples as well as domestic example. As one of the method of determination of allotment ratio in maintenance cost, the method based on the stress of structural analysis is presented and it can be an example in the similar problem later.