• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.445-448
• /
• 2001

Noise radiated from pile driving operation is one of major sources of community noise pollution and thus its operation method is strictly restricted by regulations. Although the drilling method is now used been commonly used in urban areas because of its activity, the benefit of low noise decreases due to high working cost. In the present work, noise characteristics of pile driving operation are carried out. Based on the study result, a low-noise pile cap for driven piles is developed in order to satisfy both the noise level restriction and the economical efficiency. Effects of pile cap are investigated by a scale model experiment, which is focused on the variation of impact force and sound pressure level. The results show a good possibility of noise reduction by an appropriately designed pile cap.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.928-934
• /
• 2009

Underwater impulsive sound such as underwater blasting noise, piling noise and stone breaking hammer affects marine animal hearing response and organs. This study describes the characteristics of various impulsive noise from waterfront construction site and their effect on fish. Time constant, peak pressure, energy and SEL(sound exposure level) of four different underwater impulsive sounds are quantified. Auditory and non-auditory tissue damage ranges are derived by comparing their quantities to the exposure criteria for fish. Damage ranges of auditory tissue and non-auditory tissue of underwater boring blast of 150 kg of charge, are about 100 m and 300 m, respectively. Other three impulsive sounds also gives damage effects but less than that of underwater boring blast.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.102-107
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics and prediction of piling noise in oil pressure method. On the basis of measurement value, we analysed about prediction possibility of piling noise in oil pressure method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.96-101
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the vertical SPL distribution of piling noise by oil pressure method in construction field. This study also present a basic data found a effective plans for piling noise by oil pressure method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.227-236
• /
• 1997

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issue in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because the poorness of basic data and insufficiency of the existing research. Especially, in order to establishment of sound insulation plan about pilings work noise that has highly sound pressure level and impactive, a real situation of sound characteristics about pilings work noise in foundation work demands close investigation. In this point, this study attempts to surveys the characteristics of attenuation and propagation of construction equipment noise in pilings work using SIP(soilcement injected precast pile) method. And this study intends to get the basic data for establishment of a standard about construction noise.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 말뚝기초
• /
• pp.91-115
• /
• 1993

최근 환경문제에 대한 사회적 관심이 고조됨에 따라 말뚝항타로 인한 지반진동, 소음 등이 각종 건설현장에서 심각한 문제점으로 대두되고 있다. 지반을 굴착하고 cement paste를 주입한후 기성말뚝을 삽입하는 SIP공법은 이러한 건설환경 여건의 변화에 부응하여 그 적용이 급속히 증대되고 있다. 그러나 국내에서 SIP공법으로 시공딘 말뚝의 재하시험 결과는 각종 문헌에서 제시학 있는 지지력 산정공식들과는 상이한 특성을 나타내 주고있다. 또한 말뚝의 품질관리를 위한 시험결과는 상당한 지지력 미달현상이 발생학 있는 것으로 나타나고 있어 본 공법에 대한 지지력 특성이 규명되어야 할 필요가 있다. 본 논문에서는 국내에서 시공된 사례들을 중심으로 SIP공법의 지지력 특성을 분석하여 보았다.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.51-60
• /
• 2003

최근 도심지 및 주택지에서의 기초공사가 증가하면서 저소음ㆍ저진동 공법인 SIP가 지지력 및 경제성이 우수한 항타말뚝을 많이 대체하고 있는 실정이다. SIP가 국내에 사용된지가 15년이 지났고 해마다 사용량이 증가하고 있지만 SIP의 지지 메카니즘에 대한 정확한 규명이 부족하여 항타말뚝에 비하여 설계가 보수적인 실정이다. 본 논문에서는 국내 지반 및 시공조건에서 시공된 103본의 현장 SIP의 지지력을 분석하여 지지특성을 파악하고 적합한 설계법을 찾고자 하였다. 분석결과 SIP의 지지력이 항타말뚝에 비하여 40% 이상 작게 나타났으며 보수적인 Meyerhof(20$\bar{N}_b'A_b$) 방법으로 구한 지지력이 현장 재하시험결과에 제일 근접하였다. 보수적 인 설계를 탈피하여 보다 경제적인 최적설계를 이룩하기 위해서는 품질관리법을 국내 실정에 맞게 정립하여 시공하중을 높이는 선행과정이 필요한 것으로 분석되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.921-926
• /
• 2000

Recently, in construction field, large construction equipment are used to reduce the construction schedule and labor cost. Therefore, construction vibration has caused much annoyance and that induced from operating of large construction equipment, has become a major problem for a number of dwellers in nearby construction field and it has become a very serious issue in our living environment. In this point, this study attempts to survey on the characteristics of piling vibration by oil pressure method in construction field. And this study intends to get the basic data to establish a standard about construction vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.927-932
• /
• 2000

Recently, construction vibration has caused annoyance for a number of dwellers in nearby construction field and that induced from operating of large construction equipment, has become a very serious issue in our living environment. But, construction vibration standard of our living environment. But construction vibration standard of our country is efficient. Especially, directly blow method(diesel piling method, oil pressure method, etc) has caused much problems of highly impactive vibration. Construction works, in order to solve these problem, will be used SIP(Soilcement Injected Precast Pile) method of low vibration equipment. In this point, this study attempts to survey on the characteristics of piling vibration by SIP method for various earth conditions in construction field. And this study intends to get the basic data to establish a standard about construction vibration.

• 한국건설관리학회논문집
• /
• 제6권4호
• /
• pp.152-163
• /
• 2005

깊은기초 시공시에 기초파일의 항타작업은 인접구조물 등에 진동을 야기하고 소음으로 인해 주변지역에 민원을 발생시키고있다. 이러한 문제로 진동 $\cdot$ 소음 문제를 직접 야기시키는 직타공법 보다는 주로 저소음 $\cdot$ 저진동 공법 인 천공 후 타격공법을 적용하는 사례가 증가하고 있다. 그러나 천공 후 타격공법도 일정거리 이내에서 시공을 할 경우 진동 $\cdot$소음을 유발시컥 민원으로 인한 공기지연을 초래하고 있는 실정이다. 따라서 본 연구에서는 건설 구조물의 구축을 위한 기초공사현장에서 말뚝공사를 할 때 발생하는 진동 $\cdot$ 소음을 천공 후 타격공법을 대상으로 지반조건이 상이한 7개의 현장에서 실측하여 이를 제정된 허용규제기준에 따른 적정 이격허용거리를 회귀분석 식으로 제시하고 있다. 이러한 연구 결과는 기초파일 공사시에 요구되는 적정 거리확보를 위한 기준역할을 하도록 하며, 인접 구조물이나 주민의 환경적 피해를 최소화하고, 나아가 공기지연으로 발생되는 클레임을 방지하는데 활용성을 갖도록 함에 연구의 목적이 있다.