• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.499-504
• /
• 1998

ZnO varistors having a composition of 98.0 mol% ZnO 1.0 mol% $Bi_2O_3$ 0.5 mol% $MnO_2$ were prepared by the Pechini process and the sintering behavior and electrical characteristics were studied. ZnO varis-색 powder with $1.5\mu\textrm{m}$ mean diameter and narow particle size distribution was obtained using the Pechni pro-cess. Typical intermediate stage grain growth of liquid phase sintering was observed by sintering at $1100^{\circ}C$ At this temperature ZnO varistors having uniform grain size and Bi-rich liquid phase distributed uniformly along grain boundaries were prepared. The nonlinear coefficients of the ZnO varistors were in the range of 40-60 The breakdown voltages of the varistors were nearly inversely propeortional to the grain size which reflects that ZnO varistors prepared by the Pechini process have uniform distribution of Bi-rich liquid phase along grain boundaries It is believed that the microstructures of ZnO varistors can be controlled effectively by using the Pechini process which makes the control of the electrical properties of ZnO varistors possible.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.765-774
• /
• 1995

The hot deformation behaviour of particulate reinforced aluminium 6061 Al composite were investigated by hot compression tests in the temperature range from 623K to 823K with strain rate of 10$^{-3}$ ~5.0 S$^{-1}$ . The effect of reinforced particulate volume fraction, mean diameter on the high temperature flow stress has also been studied. Experimental results showed that the increase in the volume fraction of reinforcement contributed to the rising of yield stress, but the stress above the yield point appeared to be steady state at all volume fractions. The apparent activation energy for deformation was 290KJ/mo1 for unreinforced 6061 Al, 327KJ/mo1 for 6061 Al-20vo1.% SiC composite and 531KJ/mo1 for 6061 Al-20vo1.%A1$_2$O$_3$composite. It appeared that $Al_2$O$_3$reinforced composites was more difficult to hot deform.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.158-166
• /
• 2008

Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.278-282
• /
• 1986

Rheological properties of naked barley (Songhak and Youngsan) starches were compared. The gelatinized starches at $3{\sim}9%$ concentration showed a Bingham pseudoplastic behavior. Songhak starch had higher values of consistency index and yield stress than those of Youngsan starch. The dependence of consistency index on concentration was mere pronounced in Songhak starch. Consistency index of both starches was exponentially dependent on concentration, but the slopes at $3{\sim}5%\;and\;5{\sim}9%$ starch concentration were different. The activation energies of 7% for Songhak and Youngsan starches were 4.10 and 3.71 Kcal/mole, respectively.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.826-831
• /
• 1989

The rheological properties of concentrated Kochujang (Korean red pepper paste)-water suspensions were investigated. The rheological behavior of Kochujang-water suspension was illustrated by Herschel-Bulkley equation. All Kochujang-water suspensions with 12.5-100% of water addition showed pseudoplasticity in yield stress at the shear rate range of $0.25-179.20sec^{-1}$., but at the shear rate above $5.16 sec^{-1}$, more shear thinning behavior was observed with increasing shear rate. Also, pseudoplasticity of the suspension became weak by increasing water addition and decreasing temperature, The temperature dependence of consistency index on Kochujang-suspension was very low and the values of consistency index was lowered by increasing solid contents, but as heating, the values of that was increased. It was suggested that the main components responsible for rheological behavior of the suspensions at high temperature might be undigested starch or protein in Kochujang. Also, the changes of rheological behavior with vinegar addtion was only due to dilution effect.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.214-224
• /
• 2008

Member force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.37-46
• /
• 2004

This paper presents the modeling of geosynthetic-reinforced soils and discusses the reinforcement effect arising from confining the dilatancy deformation of the soil by geosynthetics. A series of compressive shear tests for compacted sandy soil specimens wrapped by geosynthetics are carried out by quantitatively examining the geosynthetic-reinforcement effect, and it occurred from the confinement of the dilative deformation of compacted soils during shearing. In the test, the initial degree of compaction is changed for each series of sandy soil specimens so that each series has different degree of dilatancy characteristics. Herein, the axial forces working to the geosynthetics so as to prevent dilative deformation of compacted soils during shearing are measured. Furthermore, the elasto-plastic modeling of compacted soils and a rational determination procedure of input parameters needed in the elasto-plastic modeling are presented. In this paper, the subloading yielding surface(Hashiguchi(1989)) is introduced to the elasto-plastic modeling which could describe the irreversible deformation characteristics of compacted soils during shearing. Finally, the elasto-plastic finite element simulation is carried out and the geosynthetic-reinforcement effect is discussed.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1424-1426
• /
• 1997

저전압 구동이 가능한 교류구동형 박막전기발광소자를 구현하기 위해 높은 유전상수를 가지며 특히 광학적 굴절률이 발광박막과 유사하여 광학적 특성 개선에도 효과적인 것으로 알려져 있는 $Ta_2O_5$를 제조하였다. $Ta_2O_5$박막은 rf-magnetron sputtering방법으로 형성하였으며 기판온도, working pressure, 박막의 두께에 따른 전기적인 특성을 조사하였다. 10mTorr에서 제조된 $Ta_2O_5$박막은 $22{\sim}26$의 비유전율을 보였고, 유전손실은 $0.007{\sim}0.03(1kHz{\sim}10kHz)$의 값을 보였다. $100^{\circ}C$에서 제조된 박막의 전하저장용량은 $7.9{\mu}C/cm^2$이었다. 제조된 박막의 항복전압은 인가 전압의 극성에 의존하며, 전류특성은 기판온도와 200nm와 300nm의 두께에서는 $V^{1.95}{\sim}V^{2.35}$에 비례하는 space charge limited current특성을 보였고, 400nm에서는 Poole Frenkel특성을 보였다. 이상의 결과로 TFEL소자에 응용에 적합한 $Ta_2O_3$ 박막은 $200^{\circ}C$에서 증착되고 200nm와 300nm인 것으로 나타났으며, 제조된 MIS구조(ITO-$Ta_2O_5$-ZnS-Al)의 ACTFEL소자에서의 전도전하는 각각 $13uC/cm^2$, $8.3uC/cm^2$로 조사되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.102-102
• /
• 1999

6Mo급 슈퍼 스테인리스강의 내식성은 여러 환경에서 여러 가지의 부식 시험 방법을 통해서 확띤되어 왔다. 이 합금이 보이는 탁월한 내식성 때문에 해수 설비 계통,정유 설비,원자력 발전소의 열교환기 등의 중요 재료로서 그 사용 용도가 급격히 증가하고 있다. 그런데 방사선의 영향을 받게 되는 설비에 금속 재료가 사용되는 경우,특히 경수로의 노내 구조물, 액체 금속로의 열교환기, 핵융합로의 제1벽 재료 등 에서는 합금 원소가 방사성 환경에 의하여 제거되는 현상이 나타난다. 따라서 본 연구에서는 이러한 상황을 미리 재료 제조 차원에서 모사하여 탄소량과 질소량의 함량 을 달리 한 6Mo급 슈퍼 스테인리스강을 제조하여 미세 조직, 기계적 성질 및 부식 특성의 변화에 대하여 연구하였다. 진공 고주파 유도 용해로를 이용하여 탄소량과 질소량이 각기 변화된 슈퍼 스테인리스강을 용해 한 뒤 아르곤 가스 분위기에서 $1180^{\circ}C$로 soaking하고 열간 압연을 행하였다. 열간 압연으로 표변에 생성된 산화 스케일을 불산과 질산의 혼합 용액으로 제거한 뒤 냉간 압연을 행하였다. 이 냉연 판재에 대하여 $1150^{\circ}C$로 소둔하여 각 실험에 사용하였다. 광학 현미경을 이용하여 미세 조직의 변화를 관찰하였으며, 상온과 고온($520^{\circ}C$)에서 인장 시험을 행하였으며, 경도 측정을 행하였다. 또한 양극 분극 시험과 비등 질산 침지 시험 및 비등 40% NaOH 용액에서의 일정 연신율 시험을 행하 였다. 탄소 함량이 증가할수록 항복 강도 및 인장 강도는 증가하고 있으며 연신율은 감 소하는 일반적인 경향을 보였으며 비등 질산 시험에서는 탄소량에 관계없이 매우 우수한 내식성을 쁘였다. 또한 비등 상태의 40% NaOH 용액에서의 응력 부식 균열 시험 결과, 탄소량이 증가할수록 부식 저항성이 증가하고 있는 것으로 평가되었다. 한 편 질소량이 증까할수록 결정립이 미세화되었으며 경도값이 상승하였다. 이들 합금 에 대한 양극 분극 시험 결과, 질소량의 변화가 탄소량의 변화보다 내식성에 큰 영향 을 미치고 있음을 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.740-743
• /
• 2004

Rheological properties of gamma-irradiated arrowroot starch was examined to utilize as fundamental research data far processing. Irradiated arrowroot starch solutions (3, 4, 5, 6%) were gelatinized at $95^{\circ}C$ for 40 min, and its flow properties measured using rheometer at $30^{\circ}C$ and 10 to 200 rpm rotation rate. Rheological parameters of irradiated arrowroot starch gelatinized solution were calculated using Herschel-Bulkley equation. Gelatinized arrowroot starch solutions irradiated at $0^{\circ}C$ and 5kGy showed pseudoplastic fluid behavior, while those irradiated at 10, 20, and 30kGy were the dilatant with ${\tau}_y=0$ (yield stress).