• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.47-56
• /
• 2008

MC(Mission Computer) performs important function in avionics system which tactic data processing, image processing and managing navigation system etc. In general, the fault of SPOF(Single Point Of Failure) in unity system can lead to failure of whole system. It can cause a failure of a mission and also can threaten to the life of the pilot. So, in this paper, we design the HA(Hight-availability) system so that dealing with the failure. And we use HA software like Heartbeat, Fake, DRBD and Bonding to manage HA system. Also we analyze the performance of HA system using the FDT(Fault Detection Time) for fast fault detection and MTTR(Mean Time To Repair) for mission continuity.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.127-134
• /
• 2002

GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere and US DoD's systematic errors. The solution of these restrictions is the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we designed and implemened a RTK-GPS error correction signal transmission system for long-distance using the TCP/IP, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1761-1771
• /
• 2016

In respect of the existing relation between Sea-going Vessels and Vessels at anchor, Korean Maritime Safety Tribunal has applied 'Ordinary Practice of Seamen' that is regulated by the article No. 2 of COLREG. That is, general navigation rule is not applied between the two vessels, and the action to avoid collision of vessels by utilizing experience knowledge of the seamen. However, the content of the Ordinary Practice of Seamen included in the revised plan in the process of 2011 "Maritime affairs Safety Act" revision was deleted in the screening of the Office of Legislation due to the reason that it could not specified when the content of deed is not concertized. Furthermore, prior application regulation of international treaty included in the existing "Sea Traffic Safety Act"(Article 5) was deleted in the screening of the National Assembly. So, doubt about whether the Ordinary Practice of Seamen could be continuously applied according to the regulation of the international treaty, nevertheless not specified in domestic law, has been continuously raised. In this situation, recently Central Maritime Safety Tribunal changed precedent by applying of Article 96(3) of Maritime Safety Act without applying Ordinary Practice of Seamen in the Case No. 2015-001. Accordingly, this study intended to review propriety of precedent change and legal issue with the decision of Central Maritime Safety Tribunal excluding Ordinary Practice of Seamen for a collision between Sea-going Vessels and Vessels at anchor.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.243-251
• /
• 2001

GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere. The solution of these restrictions in the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we suggest Realtime Long-Distance Transmission Method of DGPS Error Correction Signal, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.171-182
• /
• 2019

Bicycles are a pollution-free means of transportation. In addition to leisure, the use of bicycles is increasing as alternative eco-friendly transportation. Accordingly, bicycle accidents are also increasing. The purpose of this study is to implement bicycle black box technology to identify situation when a bicycle accident occurs. Currently, bicycle black box products are mainly based on video cameras, and are commercially available by adding various functions mainly on high resolution cameras and are sold at high prices. If a bicycle accident occurs, quantitative data on the accident location at the time of the accident and the state of the bicycle at the time of the accident is required. In this study, IMU sensor used to obtain acceleration and slope, and time and coordinates are obtained. In addition, real-time acceleration and tilt data while is stored in memory card and by using Bluetooth transmit to the smart phone owned by the in real time to prevent accidents and to monitor status.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.1021-1031
• /
• 2020

With the advent of industry 4.0 technologies like the artificial intelligence and the autonomous flight, 'Urban Air Mobility (UAM)' is being considered as an effective alternative to resolve the ground urban traffic congestion. Accordingly, many companies in the world including Korea are investigating on the development of UAM vehicles and operation systems. In this study, after identifying and classifying the essential elements of the UAM operation, the UAM system operational concept has been derived, then detailed analyses for each element has been performed. Based on the conceptual analysis of the UAM operation system, UAM flight routes in Seoul and Gyeong-In area have been established and confirmed to be operable through the performance analysis of UAM vehicles. The flight route analysis in this study is expected to be applied to UAM flight routes establishment in various cities in the future.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.235-243
• /
• 2022

In this paper, in the case of an inertial navigation system, the posture estimation error in the initial alignment due to vertical deflection is analyzed. Posture estimation error due to DOV was theoretically analyzed based on the speed and posture error of INS. Simulations were performed to verify the theoretical grinding, and the results were in good agreement. For example, in the case of η=20", an alignment error of ϕ_N=0.00287°, ϕ_U=0.00196° occurred, and in the case of 𝜉=20", an error of ϕ_E= -0.00286° occurred. Through this, it was confirmed that the vertical posture error caused by the DOV occurred as a coupling characteristic of the INS posture error. It has been shown that an additional posture error may occur due to the DOV, which was not considered in the existing INS alignment, which means that correction for the DOV must be considered when applying high-precision INS.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.448-455
• /
• 2022

In this study, when establishing a UTM(UAS Traffic Management) system, a corridor must be set to separate the flight distance between unmanned aerial vehicles, and the size of the corridor was calculated in consideration of TSE(Total System Error). The flight data of the straight section and the turning section were collected using a hybrid vertical take-off and landing unmanned aerial vehicle. The flight data were derived from the TSE using the SQSM(Scalar Quantity Summation Method) method, and the impact on the straight and turning sections was analyzed by calculating in detail by NSE(Navigation System Error) and FTE(Flight Technical Error). The corridor size was calculated by referring to the TSE analysis results and PBN (Performance-based Navigation) manual.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.939-951
• /
• 2022

The most important factor in designing autonomous driving systems is to recognize the exact location of the vehicle within the surrounding environment. To date, various sensors and navigation systems have been used for autonomous driving systems; however, all have limitations. Therefore, the need for high-definition (HD) maps that provide high-precision infrastructure information for safe and convenient autonomous driving is increasing. HD maps are drawn using three-dimensional point cloud data acquired through a mobile mapping system (MMS). However, this process requires manual work due to the large numbers of points and drawing layers, increasing the cost and effort associated with HD mapping. The objective of this study was to improve the efficiency of HD mapping by segmenting semantic information in an MMS point cloud into six classes: roads, curbs, sidewalks, medians, lanes, and other elements. Segmentation was performed using various machine learning techniques including random forest (RF), support vector machine (SVM), k-nearest neighbor (KNN), and gradient-boosting machine (GBM), and 11 variables including geometry, color, intensity, and other road design features. MMS point cloud data for a 130-m section of a five-lane road near Minam Station in Busan, were used to evaluate the segmentation models; the average F1 scores of the models were 95.43% for RF, 92.1% for SVM, 91.05% for GBM, and 82.63% for KNN. The RF model showed the best segmentation performance, with F1 scores of 99.3%, 95.5%, 94.5%, 93.5%, and 90.1% for roads, sidewalks, curbs, medians, and lanes, respectively. The variable importance results of the RF model showed high mean decrease accuracy and mean decrease gini for XY dist. and Z dist. variables related to road design, respectively. Thus, variables related to road design contributed significantly to the segmentation of semantic information. The results of this study demonstrate the applicability of segmentation of MMS point cloud data based on machine learning, and will help to reduce the cost and effort associated with HD mapping.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.3-10
• /
• 2002

요즘 측량분야에서 Geomatics 또는 Geoinformatics라는 새로운 용어가 대두되고 있다. 해외의 유수 기관 및 대학교에서도 측량이라는 학과명 또는 기관명을 Geomatics라는 용어로 교체하고 있으며, 이는 측량분야의 다양화와 학제간 연구수행의 필요성을 반영하는 것이다. 최근 45로 일컬어지는 GPS, 원격탐사(RS), GIS, ITS의 경우 각기 독자적인 영역을 구축하기보다는 상호 보완적인 역할을 하며 통합되어 가는 추세이다. 1950년대에 기본적인 위성관측기술 및 계산 기술의 개발을 시작으로 1980년대에 이르러서는 위성 기술은 측지학 및 측량 분야에 적용되기 시작했다. 그 대표적인 것이 GPS(Global Positioning System)로 기존의 천체측정학 방식을 대체하는 유용한 위치결정 수단으로 사용되기 시작했다. DNSS로부터 시작된 GPS는 측지 측량분야, 지구물리학분야, 항법 및 교통, GIS Mapping, 기상 및 해양, 재난 및 레저, 인공위성 궤도결정 등 다양한 분야에 적용되었으며, 특히 2000년 5월 1일 SA가 해제되면서 그 활용도는 더욱 증가하고 있다. 위성원격탐사의 경우 초창기에 중ㆍ저해상도의 다중분광영상에서 시작하여 그 해상도가 꾸준히 향상되어 오늘날 0.61 미터급 고해상도 위성인 QuickBird 위성이 발사되어 운용 중에 있다. 위성영상의 공간해상도, 분광해상도, 방사해상도는 향후 계속 향상될 것이며 이에 따른 방대한 데이터의 처리 문제 및 하드웨어/소프트웨어 지원에 대한 연구가 수반되어야 할 것이다. GPS 및 원격탐사(RS)는 더 이상 독자적인 영역으로서가 아니라 Geomatics를 이루는 중요한 분야로서 타 시스템과의 보완적인 관계로서 통합되어 나갈 것이다. 이를 위해서는 공간정보에 대한 표준화 및 데이터 처리, 통합, 시스템 구축을 위한 기술적 연구가 계속 진행되어야 할 것이다.분 공부상면적보다 늘어났다. 2. 좌표의 이동량이 일률적이지 못하므로 기초점에 대한 문제라고 생각되며, 따라서 도해지적을 수치지적으로 전환함에 있어서 가장 우선되어야 할 사항이 기초점 정비라 하겠다.승이 뚜렷하였다. 따라서 비파 착즙액 첨가 기능성 yoghurt 제조시 비파 착즙액을 10% 첨가하여 혼합 starter로 Str. thermophilus와 Lac. acidophilus 혼합균주를 사용하는 것이 이들 유산균의 증식에 가장 적합한 것으로 나타났다.타났다..297, 0.293, 0.205에서 50일 경과 후 0.612, 0.472, 0.898로 비살균에서 높은 값을 보였다. 따라서 비살균의 경우 저장말기에 TBA값이 높아지는 경향을 보였다. 5. L값은 살균처리의 경우 저장 30일 이후 약간 어두워지는 경향을 보였고, 121$^{\circ}C$ 살균처리에서 높은 값을 보였다. 대체로 저장온도가 높고 저장기간이 길어질수록 약간 밝아지는 경향을 보였다. 적색도는 인삼 첨가구의 경우 상온 및 냉장저장에서 10$0^{\circ}C$ 살균이 121$^{\circ}C$ 처리구 보다 약간 높은 값을 보였다. 저장기간에 따른 적색도의 변화는 인삼과 송이 첨가구에서 비교적 안정적이었다. 황색도는 상온 및 냉장저장에서 저장기간에 따라 약간 감소하는 경향을 보인 후 상온저장 50일 째, 냉장 60일 째 가장 높게 나타났다. 121$^{\circ}C$ 살균처리구가 10$0^{\circ}C$ 처리구보다 약간 높은 경향을 보였다.^{\circ}C$$,에서는 20시간 가열시 0.706$\mu\textrm{g}$/kg으로 가장 높게 생성된 후 서서히 감소하였다. 그러나 산값과 공액이중산값은 계속 증가하는 양상을 나타냈다. 즉 B(a)