• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.857-864
• /
• 2012

Reviewing the statistics of harbor shipment of hazardous and noxious substance and the past spill accidents of HNS enabled us to assess the potential risks of transportation of HNS through the major harbors in Korea. Ulsan, Yeosu, Daesan port are relatively evaluated high risk in fire, health and environment disaster. Through the analysis of domestic preparedness to HNS accidents, the supplement of expertise resource to respond the vulnerability of the explosion, the fire and the physiological hazard, is required. Based on this risk assessment and review of the advanced case of Japan in building up HNS response system, a resource model at a national level was proposed which differentiates the sea areas for the proper allocation of resources to respond effectively to HNS accidents in the future.

• 한국해양학회지
• /
• v.4 no.1
• /
• pp.9-16
• /
• 1969

The sand drift movement at Young Il Bay area was tentatively investigated using Co-60 glass sand. Grain size and specific gravity of the glass sand which has originally contained natural cobalt, Co-59, was made similar to those of the real coastal sand, and was irradiated in a beam port of the reactor Triga Mark II to make the glass sand radioactive by the reaction of 59Co(n, r)60Co. The radioactive cobalt glass sand was deposited on the preselected point of sea bed, and, after a couple of weeks, the drift of sand was traced by means of specially designed water-proof G-M detector. Net counts at each point were plotted to figure out equicount lines and consequently such aspects as the direction of sand drift movement, the scope of distribution and the relative drift velocity etc. were indicated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.1
• /
• pp.18-27
• /
• 1990

The calmness inside a harbor plays an important role in the appropriate disposition of har-bor structures. However, it is not easy to get the accurate computational results because they are affected by many factors concerning with the wave transformation. Successful solution also depends on determining the boundary values appropriately. This paper presents the numerical model which is able to calculate wave heights inside a harbor It is based upon the time-dependent mild-slope equation involving wave refraction, diffraction, shoaling effect and reflection. In particular, the arbitrary reflectivity is used at the boundary in order to simulate the real harbor reflection condition. This numerical model is applied for Hupo-Harbor and its validities are investgated by comparing with experimental values from the hydraulic model test as well as computational results from Taka-yama's numerical model (1981). It is shown that the model results are in good agreement with results from hydraulic model and Takayama＇s.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.80-85
• /
• 2015

In this paper, we present, an indstrial RFID layered microstrip patch antenna is designed using an inset feed method in order to improve recognition rates in a long distance as tags are attached to metal object by improving a problem of feeding power in fabricating metal tags and reducing effects of metallic object. The inset feed shows a distinctive characteristic that has no separation between emitters and feed lines differing from a structure with the conventional inductive coupling feed. This structure makes possible to produce a type that presents a low antenna height and enables impedance coupling for tag chips. Although it shows a difficulty in the impedance coupling due to increases in the parasite capacitance between a ground plane and an emitter in an antenna according to decreases in the height of a tag antenna, it may become a merit in designing the tag antenna because the antenna impedance can be determined as an inductive manner if a shorted structure is used for feeding power. Therefore, in this paper the microstrip patch antenna is designed as a modified type and applies the inset feed in order to reduce effects of metallic objects where the antenna is be attached. Also, the antenna uses a multi-layer structure that includes a metal plate between radiator and ground instead of using a single layer.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.957-967
• /
• 2013

While a vast number of cad drawings are produced in the life cycle of construction projects from the planning, design, and construction phases to the maintenance and control phases, the creation and distribution of non-standard drawings make it difficult for the construction parties to communicate with one another and to recycle, maintain, and control drawings by project phase. The Korea standard of CAD drawing in construction CALS/EC, which stipulates the standard for construction CAD drawings, is based on roads, rivers, and railways in line- and unit-based structures, allowing the creation of standardized CAD drawings. Such standard, however, cannot be easily applied to construction projects with multiple facilities like harbors, housing sites, or lands consisting of surface forms. In particular, port field consist of complex docks and amenities located in a certain coastal area based on multiple objectives. They also contain the concept of housing sites, like background land, and are composed of various civil engineering facilities, construction facilities, and port field, so that the existing CAD drawing standard cannot be easily implemented. Therefore, the purpose of this study is to maximize the efficiency of the information related to drawing information and to ultimately support smooth information exchanges in construction design by conducting a development research on the expansion of the CAD drawing standard that meets the needs of port field.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.9-15
• /
• 2019

Mooring bollards are the mandatory facility in ports for they are the objects used to fasten the ship to its position at the berth. All the mooring bollards were installed following suggested sizes, numbers, materials and shape of installation according to Port and Fishing Design Standards. However, Korea has no management standard for use of mooring bollards to safety in ship berthing. In this research, the installation standard for mooring bollards including the holding power applied to mooring bollards in berthing was studied. Also, the performance of mooring bollards for minimum safety guarantee in berthing based on research of various specification by their sizes was analyzed. The analysis on mooring bollards was examined by each power on mooring bollards from the applied force in berthing divided into horizontal and vertical direction in order to examine the performance of domestic mooring bollards, the limit force is calculated based on detailed specification research result. As a result, the working stress according to the towing force was found to be at least 150Mpa and it was evaluated to be 60% of the limit strength. Also, by comparing each forces, the appropriateness was examined and the specification of maximum capability calculated. This performance evaluation method based on detail specification of mooring bollards will be expected to be useful to examine the appropriateness of mooring bollards for various types of vessel in berthing and to develop maintenance and management standard through the performance change evaluation referring to mooring bollard detailed specification changes.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.121-126
• /
• 2004

The operation and function of the ports today require new trends and changes in continuous increase of freight and volume of containers as well as complexity of surface transport system. These changes affect future operational systems, Transport equipments and arrangements of comtainer blocks. To achieve an adaptable container port of the next generation. The architectural planning also needs to be changed in accordance with it. We try to probe some problems of current architecture related container ports system and expect some future changes. Finally, We studied adaptable architectural planning trends and methods of indoor and outdoor spaces of operational building, gates etc in container pors of next generation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.53-67
• /
• 1998

This paper suggests a method designing the TSK fuzzy controller based on the TSK fuzzy model, which guarantees the stability of the closed loop system and makes the response of the closed loop system to be a desired one. This paper deals with the general type of TSK fuzzy model of which consequents are affine equations having a constant term. The TSK fuzzy controller suggested in this paper is designed by using the pole placement which developed for the linear systems and makes the closed loop system have the same behavior as a desired linear system. A reference input can be introduced to the suggested TSK fuzzy controller and an integral action also can be introduced. Simulation results reveal that the suggested methods are practically feasible. This paper deals with both the continuous systems and the discrete systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.16-28
• /
• 2000

The steady rotating flows in eccentric annulus has been studied by a numerical method based on the spectral collocation method. The inner cylinder has a constant angular velocity while the outer on e is stationary. Flow between eccentric cylinders is of considerable technical importance as it occurs in journal bearings. In the present work, the governing equations for laminar flow are expressed as Navier-Stokes equations, including the non-linear convection terms. The solutions were utilized i, estimate the effects of the nonlinear terms on the load acting on the rotating cylinder. Based on the half and the full Sommerfeld methods, the load on the rotating cylinder is evaluated with eccentricity, by integrating the pressure and skin friction around the cylinder. The attitude angle and Sommerfeld reciprocal are calculated from the load. Also, the torque on the rotating inner cylinder was calculated. considering the skin friction. The attitude angle and Sommerfeld reciprocal are decreased with eccentricity. Viscous damping coefficient due to the skin friction becomes larger with decreasing the annular space. It is found the non-linear effects of the convection terms on the flow and the load are important. especially on the attitude angle, for relatively wide annular configurations however, the effects on those are minor for very narrow annular ones.

• Journal of Korean Library and Information Science Society
• /
• v.44 no.3
• /
• pp.75-98
• /
• 2013

This study aimed to identify the problems of toy libraries by investigating and analyzing the identity and administration of toy library and so to propose the approaches to improve the legal and administrative status of toy library. In accordance with the analysis, only 9.8%(5) of 51 toy libraries in Korea was established on the basis of the Libraries Act. Most toy libraries were established and operated without any basis on legal institutions or toy library ordinances of local authorities(45%). The purposes of establishment were different from the identity of toy library specified in the provisions of Clause 1, 2 and 3, Article 2, Libraries Act, as 82.4% of toy libraries was established for rental of toys, providing game data and cultural activity service and distributing game programs. For the legal registration standards based on the Libraries Act, it was found that 96.1% exceeded the floorage requirements, 92.3% exceeded the seating requirement and 45.1% exceeded the collection requirement on the basis of the small libraries. Only 13.7% employed the librarians. Next, most toy libraries secured just 70% of the required budget. In conclusion, this study proposed the local authorities to establish the ordinances related to toy library on the basis of the Libraries Act. Next, it was also proposed for the toy libraries to register themselves in accordance with the Libraries Act for securing the legal status. Finally, the local authorities need to rationalize and support the budgets for rationalizing the administration of toy libraries.