• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.31-40
• /
• 2021

Modern aircraft are high-performance and lightweight. Thus, the characteristics of the flexible structure appear and affect flight performance or limit it. These flexible characteristics need to be analyzed from the early stages of aircraft design. To this end, a program to analyze the dynamic and static behavior of flexible aircraft has been developed and the results are presented. Based on the multi-body dynamics simulation technique, rigid flight mechanics, structural vibrating behavior, and unsteady aerodynamics have been developed and integrated. Lastly, the level flight and the turn flight of the flexible characteristic aircraft have been analyzed using this integrated simulation program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.695-702
• /
• 2012

In this study, Multi-fidelity analysis is performed to improve the accuracy of analysis result during conceptual design stage. Multidisciplinary Design Optimization(MDO) method is also considered to satisfy the total system requirements. Low-fidelity analysis codes which are based on empirical equations are developed and validated for analyzing the Unmanned Aerial Vehicle(UAV) which have unconventional configurations. Analysis codes consist of initial sizing, aerodynamics, propulsion, mission, weight, performance, and stability modules. Design synthesis program which is composed of those modules is developed. To improve the accuracy of the design method for UAV, Vortex Lattice Method is used for the strategy of MFA. Multi-Disciplinary Feasible(MDF) method is used for MDO technique. To demonstrate the validity of presented method, the optimization results of both methods are compared. According to those results, the presented method is demonstrated to be applicable to improve the accuracy of the analyses during conceptual design stage.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1928-1929
• /
• 2011

무인항공기란(Unmanned Aerial Vehicle : UAV)란 일반적으로 조종사 없이 사전에 입력된 프로그램에 따라 또는 비행체 스스로 주위환경(장애물, 항로)을 인식하고 판단하여 자율 비행(Autonomous Flying)하는 비행체를 말한다. 본 논문에서는 항법센서(Attitude Heading Referance System: AHRS)를 비행제어 시스템과 통합한 시스템에 관하여 다루었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.83-88
• /
• 2006

One of the most important works in the development of military aircraft is to construct and utilize the various technical data and information needed in the design, analysis and evaluation under integrated system structure. A vast and various data in oder to optimize cockpit design is needed in geometric & arrangement design, vision analysis and escape system design. In addition, the application of ergonomics cockpit design concept based on the sorts of human elements and anthropometric data as design consideration for pilots is required. To accomplish above these activities, the data gathered and formed through the aircraft development program was become database and developed by tool to be able to support ergonomics cockpit design work.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.309-314
• /
• 2010

In this work, the helicopter price estimation formula from Harris & Scully is revised and updated for more accurate prediction of the current prices of helicopters which can be applied in the preliminary design stage. As many as 74 helicopter price and sizing data after the year 1997 are newly included to the out-dated coefficients in the cost estimation formula. In addition, the updated price estimation formula is added to Tishchenko's preliminary sizing method for price consideration in the preliminary design stage. Sikorsky's S-76C+ helicopter is used along with other various helicopters for comparison and validation of the sizing code as well as the new updated price estimation formula.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.671-680
• /
• 2020

This paper describes an improved beam analysis for compound rotorcraft fuselage design. The present beam approach is capable of analyzing fuselage composed of stiffeners using equivalent layer methodology. Thickness of the skin and laminated layer approach are suggested based on the unified beam formulation. The analysis which considers an equivalent stiffener layer is performed for a fuselage with stiffeners and preliminary study about the specification of stiffeners is conducted and compared by the results using the existing software.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.50-56
• /
• 2005

The objective of this study is to find the optimal thrust condition and wing loading of a vertical take-off and landing (VTOL) fixed-wing aircraft through a single engine failure analysis during landing approach and an analysis of transition flight. The aircraft analysis modules used in the study are based on the aircraft synthesis program. To achieve the computing infrastructure for aircraft design and analysis, the EMDIOS was employed as a design framework, which is a semi-completed application program and ready to customize. Simulation results reveal the most critical height at the event of single engine failure is approximately 40 ft. And, in order to avoid a significant loss in altitude during the transition, the thrust to weight ratio must be kept high, while both the engine tilt speed and the wing loading must be kept low, as confirmed by the analysis results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2013

This paper describes the design optimization of Unmanned Aerial Vehicles(UAVs). An optimization framework has been developed and implemented for the conceptual design of UAVs. An integrated design analysis program was developed with several analysis modules such as propulsion, performance, mission, weight, and stability and control. A UAV configuration design optimization was performed by implementing the integrated analysis to enhance the endurance of UAVs. A SQP optimizer was utilized to build an optimization module for this program and sensitivity analysis was performed to determine the trends of shape variables for developing optimization objective. In conclusion, the results indicate that the resulting optimized UAVs configurations show performance improvements over the baseline design and reliable analysis results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.649-656
• /
• 2013

High-lift devices have a major influence on takeoff, landing and stall performance of an aircraft. Therefore, a slotted flap design optimization process is proposed in this paper to obtain the most effective flap configuration from supported 2D flap configuration. Flap deflection, Gap and Overlap are considered as main contributors to flap lift increment. ANSYS Fluent 13.0.0$^{(R)}$ is used as aerodynamic analysis software that provides accurate solution at given flight conditions. Optimum configuration is obtained by Sequential Quadratic Programing (SQP) algorithm. Performance of the aircraft with optimized flap is estimated using Aircraft Design Synthesis Program (ADSP), the in-house performance analysis code. Obtained parameters such as takeoff, landing distance and stall speed met KAS-VLA airworthiness requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.969-973
• /
• 2018

Avionics OFP runs on the mission computer and can be operated by interacting with several avionics equipments. In order to verify OFP SW, SIL having real avionics equipments or models is absolutely necessary. Therefore in many cases SIL is implemented concurrently with OFP developing, and only one SIL is provided to developers. So developers sometimes need an alternative to SIL for verifying requirements in the middle of development process. In this paper, we propose a single PC based STE SW that simulates interworking equipments and verifies OFP in a single PC environment without actual interworking equipments or SIL HW interfaces.