Proceedings of the Korea Water Resources Association Conference
/
2007.05a
/
pp.1915-1919
/
2007
하천관리 및 수공구조물의 설계 등을 위한 빈도별 홍수량 산정 시 이용되는 방법에는 Clark 단위도법, Snyder 단위도법, KICT 단위도법 등이 있다. 이 중 대표적인 합성단위도법인 Clark 단위도법은 실무에서 가장 많이 사용되는 방법으로 꼽을 수 있으나, Clark 단위도법 매개변수인 집중시간$(T_c)$과 저류상수(K)를 추정하는 것은 단순하지 않다. Clark 단위도법의 매개변수 추정은 계측 유역인 경우와 미계측 유역인 경우로 나눌 수 있는데 대부분의 경우 미계측 유역의 도달시간 및 저류상수를 추정하는 방법으로 홍수량을 산정하고 있는 실정이다. 본 연구에서는 감천유역을 대상유역으로 선정하였으며, 김천수위표 지점을 유출지점으로 선정하여 홍수량을 산정하였다. 호우사상은 김천수위국의 수위-유량 곡선식으로 유출량의 검정이 가능한 년도를 고려하여 1998${\sim}$2005년 사이의 호우사상 중 분석이 가능한 것으로 판단되는 부항2와 김천 강우관측소의 시강우 자료를 선정하였다. 선정된 호우사상은 1999년, 2002년, 2004년에 대한 총 6개의 시우량 자료로 WAMIS(국가수자원종합정보시스템)와 한강홍수통제소(www.hrfco.go.kr)의 자료실에서 제공하는 한국수문조사연보 자료를 이용하였다. 선정된 호우사상과 WMS모형을 이용하여 산정된 유역면적 및 강우관측소 별 Thiessen 가중계수를 이용하여 HEC-1모형의 최적화기법으로 Clark 단위도법의 집중시간$(T_c)$과 저류상수(K)를 산정하였으며, 계측유역의 매개변수를 산정하는 방법 중 저류방정식을 이용하는 방법을 이용하여 저류상수를 산정하여 비교하였다. 집중시간의 경우 1999년과 2002년에 비해 2004년의 결과값이 작게 산정되었으며, 저류상수의 경우 2004년의 결과값이 크게 산정되었다. 그러나, 저류방정식을 이용하여 저류상수를 결정하는 방법으로 산정한 저류상수는 비교적 일관성 있게 산정되었다.
KSCE Journal of Civil and Environmental Engineering Research
/
v.36
no.3
/
pp.439-449
/
2016
The methodology of synthetic unit hydrograph using geomorphic characteristics was suggested. Six geomorphic components over 19 watersheds were used to estimate synthetic unit hydrograph and the test watersheds were classified into two groups on the basis of the area of $200km^2$. The regression formulas between standardized geomorphic characteristics for each group and peak quantities of specific streamflow and time of representative unit hydrograph were suggested and the Nash and the Clark unit hydrographs were derived. For verifying the derived unit hydrographs, the resulting hydrographs were compared with the ones using the existing Clark unit hydrographs based on the empirical parameter estimation for the 145 storm events during 2010 to 2011 for the additional six watersheds. The results showed the relatively higher performance over the existing synthetic unit hydrograph methods, which could be a contribution to the hydrologic estimation in ungauged watersheds.
Proceedings of the Korea Water Resources Association Conference
/
2007.05a
/
pp.1608-1613
/
2007
최근들어 수자원 분야에서 GIS(Geographic Information System)의 활용에 대한 많은 연구가 이루어지고 있다. 수자원 관련 분야에 있어서 GIS는 수문현상에 영향을 미치는 기상학적인 요인, 토양, 토지이용도, 배수 유역의 형태 등 수문정보를 획득하기 위한 수단으로 사용될 수 있을 뿐만 아니라, 유역에서의 지형학적, 기후학적 특성을 시간과 인력을 절약하여 정량화할 수 있다는 것이 입증되고 있다. 하천에서의 유출량 추정은 강우, 수위와 같은 수문데이터의 신뢰도에서 많은 문제점이 야기되고 있다. 따라서 모의 입력매개변수의 중요요소인 지형정보의 경우 GIS 기법을 이용할 경우 기존 방법과는 달리 신뢰성 있는 정보를 획득할 수 있으므로 모형의 결과를 개선하는 데 도움이 될 것이다. 본 연구에서는 미국의 Environmental Modeling Research Laboratory(EMRL)에서 개발한 지리정보시스템과 수문유출모형이 접목된 WMS(Watershed Modelling System) 모형을 HEC-1 모형과 연계하여 낙동강수계 제1지류인 회천유역 개진1, 개진2 지점의 유출 해석을 실시하였다. GIS와 결합된 홍수유출모형인 WMS를 이용하여 유역 내의 지형특성인자 및 하천망을 추출하였으며, 유출해석은 WMS에 내재된 HEC-1을 이용하였다. 유효강우량의 산정을 위해 SCS CN 값을 사용하였으며, CN 계산을 위해서는 토지이용도 토양도를 이용하였다. 합성단위도법은 SCS 무차원 단위도법을 사용하여 유출을 모의하였다.
Proceedings of the Korea Water Resources Association Conference
/
2015.05a
/
pp.419-419
/
2015
강우로 인해 발생하는 하천의 홍수량 결정은 수공구조물의 최적설계 및 효율적 관리를 위해 매우 중요하다. 우리나라에서는 주로 강우-유출 해석을 동해 홍수량을 결정하고 있다. 강우-유출 해석을 위해서는 단위도가 필요하고, 단위도를 유도하기 위해서는 장기간의 과거 강우기록 및 유량의 실측자료가 필요하다. 하지만, 그간 우리나라에서는 과거 수문자료의 부족 및 수위관측소의 부재 등의 이유로 미계측 유역에서 사용하는 방법인 Snyder 합성단위도법, SCS 무차원 합성단위도법, Clark 단위도 방법을 주로 사용하였다. 그러나 이와 같은 방법들은 외국에서 유도된 공식이기 때문에 국내 적용에 어려움이 많으며, 유역 특성에 따라서도 차이를 보이고 있다. 최근 양질의 강우-유출사상 측정 자료가 많아져서 단위도를 직접 유도할 수 있는 여건이 구축되었다. 이에 본 연구에서는 국내 유출특성을 적용할 수 있도록 42개 지점의 강우-유출 실측자료를 이용하여 각 유역별 단위도를 작성하고 무차원단위도의 유도를 통해 평균값을 도출하였다. 평균 무차원단위도의 유도 결과를 국내 유역의 실측치와 비교를 통해 적용성을 확인하였으며, 국내 유역의 강우-유출관계를 반영하는 성과를 얻을 수 있다. 본 연구를 통해 유도된 무차원단위도는 추후 우리나라 각종 유역에 대한 검증을 통해 대표적인 무차원단위도로 활용할 수 있을 것으로 기대된다.
Improved methodology of Synthetic Unit Hydrograph (SUH) utilized generally in hydrologic design work was suggested. In this study, regression analysis between peak hydrological data and geospatial data was applied to estimate specific peak flow and peak time for determining shape of SUH. Regression formulas for specific peak flow with respect to shape factors show higher coefficient of determination (0.73~0.81) than the ones with geospatial components only (0.52~0.69). The areal limitation of unit hydrograph application is regarded as 500~700 $km^2$. The validation through rainfall-runoff simulation shows encouraging results that relative error is 1.7~29.0%(Avg. 11.6%) for the case of using SUH developed in this study and 35.0~ 64.9% (Avg. 46.7%) for the SUH in the previous study except for the extraordinary cases.
Generally, the synthetic unit hydrograph method is presented to estimate the design flood in the ungaged watershed. However, due to the lack of rainfall-runoff data, the models developed in other countries such as U.S.A. and Japan have been widely used in Korea. Therefore, it may be essential to develope the rainfall-runoff model suitable for the hydrological char-acteristics in Korea. In this study, the representative unit hydrographs are derived from rainfall-runoff data at 19 basins in Selma-Cheon and 3-IHP experimental watersheds using ridge-regression method and Nash model. And a new synthetic unit hydrograph for Korea is suggested by integrating the described results and previous studies on unit hydrograph. The newly developed method is represented as two regression forms with three independent variables of watershed area, channel length, and channel slope by multiple regression analysis is carried out for each watershed, the coefficients of determination are not improved in all cases compared out for each watershed, the coefficients of determination are not improved n all cased the synthetic unit hydrograph for each watershed. Therefore, when the new method is applied to some watersheds, the result analyzed for all data has to be used.
KSCE Journal of Civil and Environmental Engineering Research
/
v.31
no.1B
/
pp.47-55
/
2011
This study suggests new synthetic unit hydrograph method considering hydrodynamic characteristic on the basin. The suggested method based on width function GIUH, and the procedure is summarized as follows; 1) Draw up a travel distance distribution map (width function) which is raster of length between from center of individual cells to the outlet by GIS. 2) Calculation of travel time distribution map (rescaled width function) by hydrodynamic parameters and travel distance distribution map. 3) Derivation of IUH and Duration UH from rescaled width function. 4) Comparison of shape of UH between suggested method and existing synthetic unit hydrograph methods. The target basins are selected Ipyeong and Tanbu subwatershed in the Bocheong Basin. The target basins are similar scale (watershed area), but different drainage structure (drainage density et al.). Therefore we anticipate that there are different hydrologic response functions because different hydrodynamic characteristics. As a result of derivation of UH, existing synthetic unit hydrograph methods are similar shape of UHs about Ipyeong and Tanbu watersheds, but the suggested method is different shape of ones. As a result of application to observed data, the peak discharge by suggested method is similar to existing synthetic unit hydrograph methods, but the peak time is well correspondence between those. Henceforth, if the suggested method combines with the rational velocity estimation method, it is useful method for synthetic of UH in ungauged watershed.
Proceedings of the Korea Water Resources Association Conference
/
2008.05a
/
pp.699-703
/
2008
현재 홍수유출량을 산정하기 위해서 실무에선 각 하천마다 유출량에 대한 자료들이 부족한 실정으로 Clark 및 Snyder 등의 여러 가지 합성단위도법을 이용하여 홍수유출량을 추정하고 있는 실정이다. 이와 같이 합성단위도법을 이용하여 유출량 추정시 가장 중요시 되는 도달시간 및 저류상수 등의 매개변수를 산정하기 위하여 수자원분야에서도 GIS의 기법을 도입하여 대상유역의 수문학적 지형인자들을 추출하는 방법을 채택하고 있다. 이는 과거의 방법에 비하여 손쉽고 정확하며 신뢰성 있는 자료들을 제공하고 있지만 하천망 생성 및 유역분할 등을 생성하는 과정에서 각 적용시킨 모형마다 약간의 차이를 보이고 있는 실정이다. 따라서 본 연구에서는 각 방법들에 의해 추출되어지고 있는 지형인자들을 보다 정확하고 신뢰성 있는 수문학적 지형인자를 추출하고 이를 강우-유출모형에 적용시켜 자연하천유역의 홍수유출량을 추정하기 위하여 적절한 지형인자 추출 방법을 제시하고자 한다. 강우-유출 모의시 중요시되는 매개변수 산정을 위해 수자원종합관리시스템을 구현하기 위해 국내기술로 개발된 HyGIS 모형과 기존의 지형인자 추출 방법 중에 하나인 Arcview GIS 모형을 적용하여 분할된 소유역 및 격자크기별로 지형인자들을 추출하여 두 모형의 차이를 비교 분석하였으며 이를 토대로 매개변수 및 홍수유출량 추정에 미치는 영향을 분석 하였다. 추정된 유출량을 검증하기 위하여 실측된 유량자료로 개발된 수위-유량관계곡선식을 이용한 홍수량과 비교 검토하였다.
Generally, design flood for a hydraulic structure is estimated using statistical analysis of runoff data. However, due to the lack of runoff data, it is difficult that the statistical method is applied for estimation of design flood. In this case, the synthetic unit hydrograph method is used generally and the models such as NYMO method, Snyder method, SCS method, and HYMO method have been widely used in Korea. In this study, these methods and KICT method, which is developed in year 2000, are compared and analyzed in 10 study areas. Firstly, peak flow and peak time of representative unit hydrograph and synthetic unit hydrograph in study area are compared, and secondly, the shape of unit hydrograph is compared using a root mean square error(RMSE). In Nakayasu method developed in Japan, synthetic unit hydrograph is very different from peak flow, peak time, and the shape of representative unit hydrograph, and KICT method(2000) is superior to others. Also, KICT method(2000) is superior to others in the aspects of using hydrologic and topographical data. Therefore, Nakayasu method is not a proper in hydrological practice. Moreover, it is considered that KICT model is a better method for the estimation of design flood. However, if other model, i.e. SCS method, Nakayasu method, and HYMO method, is used, parameters or regression equations must be adjusted by analysis of real data in Korea.
Proceedings of the Korea Water Resources Association Conference
/
2015.05a
/
pp.428-428
/
2015
최근 제주도는 극한사상의 기상발생빈도가 점차 증가하여 집중호우, 태풍 등에 의한 홍수피해가 점자 증가하고 있는 실정이다. 따라서 지역특성에 적합한 단위유랴도 산정은 실제 하천설계 및 치수방재를 위해 필수적이다. 따라서 본 연구에서는 외도천유역의 유역특성을 반영한 최적 단위유량도를 산정하기 위해 강우-유출모형은 HEC-HMS모형을 이용하였으며 적용한 단위도는 Clark, Sndyer, SCS 합성단위유량도법으로 각 사상마다 실측 유량자료와 비교 분석하였다. 일원분산분석 결과는 각 단위도의 첨두유량과 첨두시간에 대한 p-value가 유의수준 0.05보다 크기 때문에 귀무가설이 성립이 되며 각 단위유량도의 방법별 첨두유량 및 첨두 시간의 유의적 차이는 없다고 분석되었다. 오차율로 비교하면 Clark 합성단위도가 대상유역인 외도천의 유역특성을 가장 잘 반영하는 것으로 판단되며 Clark 단위유량도의 오차율은 0.02 ~ 1.93%로 타나났으며 첨두시간에 대한 오차율은 0 ~ 2.74%으로 나타났다. 향후 홍수유출량 산정하기 위해 장기간 지속적으로 유량관측자료 확보 및 구축이 필요하며, 이러한 제주형 유도식 개발 및 최적의 매개변수와 단위도를 적용한다면 신뢰도 높은 유출 특성 결과를 도출 할 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.