• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.270-281
• /
• 2021

The Yongjam of Oejae, Yi Dan-ha's wife, is an ornamental hairpin with a dragon-shaped engraving; designated as National Folklore Cultural Heritage No. 4. It is also a component of the ceremonial costume, and an artifact of great value as it clearly identifies the position of the wearer and the period of this artifact. The Yongjam has been well preserved in general; however, various pollutants and corrosive products have affected the engraved patterns, requiring conservation treatment. Furthermore, a non-destructive analysis was conducted to identify the components of the materials and the manufacturing techniques used in the ornament. The Yongjam is hollow inside to reduce its weight when placed in the hair and has a color contrast of gold, red, and black. The decorative part and the body were made separately. That is, the body was made from an alloy of copper, silver, and zinc, and its joint was elaborately connected without any overlaps. In the decorative part, different alloy ratios were identified in the dragon's face, beard, horn, body, and fin. Further, for the dragon's face with its delicate patterns, an alloy of silver and copper was used, likely to make the face appear as realistic as possible.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.265-268
• /
• 2004

한국의 전통국악기 가운데 대중들에게 가장 친근한 악기 가운데 사물놀이 악기이다. 징, 장구, 꽹과리, 북, 이 사물 악기 가운데도 특히 징악기는 소리가 웅장하고 부드러우며 감싸주는 멋이 있다. 징의 구조는 직경 $39\~40cm$인 둥근 원판과 림(Rim:전두리)으로 되어 있다. 재질은 동과 주석을 78:22의 비율로 합금한 유기(놋쇠) 제품으로 만들 때는 방짜유기로 만든다. 본 논문에서는 우선 파동방정식에 의해서 수리적으로 징의 기본 주파수를 구하고, 만곡 면으로 된 원판을 지지하고 있는 징의 Rim 두께와 깊이에 따라 징악기 소리의 세기를 나타내는 진폭과 소리 여운의 지속 시간을 변동 시키는 관계를 본 연구 논문에서 밝히고자 한다.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.65-70
• /
• 2002

This study was to evaluate GMA welding characteristics of the A15083-O aluminum alloy according to the shield gas mixing ratio and heat input change. The GMA welding of the base metal was carried out with flour different shield gas mixing ratios(Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%). Regarding the if1uence on the bead shape of the shield gas mixing ratio and heat input, the bead width was greatest in Ar100%+He0% mixture. But the penetration depth and area were greatest in Ar33%+He67% mixture considering that the lower Ax gas ratio, the higher bead depth and area. Also, dilution was also best in the shield gas mixing ratio. The size and number of deflects were least in Ar33%+He67% mixture. Higher He gas ratio resulted in less deflects detected by the radiographic inspection.

• Tribology and Lubricants
• /
• v.29 no.4
• /
• pp.242-247
• /
• 2013

This study aims to establish the fundamental basis for the design of materials used in high-speed trains, by using a lab-scale dynamometer to evaluate the characteristic behavior of metallic sintered friction materials in relation to the shape of graphite. The test results clearly demonstrate that when flake graphite and granular graphite are added equivalently, the average coefficient of friction is much lower, and it is less influenced by speed variation; moreover, friction wear is observed to be insignificantly low. Adding flake graphite increases the coefficient of friction, which leads to higher friction wear. In addition, the roughness of the disc surface was equivalent regardless of the shape of the graphite.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.515-523
• /
• 2003

Shape memory is physical phenomenon which a platically metal is restored to its original shape by a solid state phase change by heating. TiNi alloy the most effective material in the shape memory alloy(SMA). To study(measure) recovery stress of intelligent composite. Ti50-Ni50 shape memory matrix with prestrain SMA fiber. When SMA fiber of the intelligent composite is heated over austenite starting temperature(As) by electric heating. a recovery stress are generated. The recovery stress of the intelligent composite was measured by strain gage or photoelastic experiment. Measuring method of recovery stress by photoelastic experiment was developed in this research. It was certified that photoelastic experiment was more effective and more precise than strain gage method in the measurement of recovery stress.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.516-521
• /
• 1997

국내개발 액체금속로 KALIMER 노심으로 설계한 전기출력 150 MWe (열출력 392 MWth)의 U-Zr이원합금핵연료 사용 소형노심에 대하여 열수력 특성을 분석하고, 그 결과를 전기출력 333 MWe (열출력 840 MWth)의 중형노심설계 특성과 비교ㆍ분석하였다. 분석에는 국내개발 액체금속로 KALIMER 노심설계기술 개발의 일환으로서 개발한 개념설계 초기 단계에서의 노심 열수력 특성 분석 방법을 사용하였다. 열수력 특성 분석은 먼저 각 집합체의 최고 선출력에 따라 유량그룹을 설정하고, 각 집합체의 최고온도 연료봉에 대하여 냉각재 온도, 피복관 중심온도, 핵연료 중심온도 등을 계산하는 방식으로 수행하였다. 특성분석 결과 두 노심 모두 노심내 출력분포를 더욱 평탄화 하고, 노심핵연료 영역에 대한 반경방향 블랑？ 영역의 출력비율을 높이는 작업이 필요하다.

• Journal of Welding and Joining
• /
• v.2 no.2
• /
• pp.29-37
• /
• 1984

발전설비를 비롯한 산업설비, 각종 압력용기 및 철구조물 제작시 발생하는 여러가지의 용접불량 중에서 슬래그 혼입이 차지하는 비율이 전체 불량의 절반 이상을 차지하고 있다. 특히 여타의 용접법에 비해 SMAW에 의한 슬래그 혼입의 발생이 가장 많으므로 이에 대한 결함 발생의 경향을 조사하고 그 방지대책을 설정하기 위하여 이번 실험을 실시하게 되었다. 수동 용접봉의 피복제 중 가스 발생 원인은 아아크 분위기를 생성하고 기타 부분은 슬래그가 되어 용융금속을 둘러싸서 이것을 보호하면서 용융지로 이행한다. 슬래그는 용융지 내에서 비이드 표면으로 부상하면서 탈산반응이나 불순물을 제거하는 정련작용을 한다. 또한 적당한 합금 원소의 보충, 용융금속의 유동성 증가 등에 의하여 양호한 용착금속의 생성을 돕는다. 한편, 슬래그는 고온금속을 덮어 이것을 보호함과 동시에 급냉을 완화하는 작용을 한다. 그러나 이러한 슬래그가 응고하는 용착금속 사이에 혼입된다면 용착금속의 기계적 성질을 저하시키는 중요한 요인이 된다. 슬래그 혼입에 대하여 간단하고 일반적인 방지대책은 많이 언급되어 있으나 슬래그 혼입의 방지대책에 대해 깊이 있는 연구가 거의 없다. 이번 실험에서는 광범위한 요인의 선제, 싯수의 제안으로 인하여 새로운 슬래그 혼입 기구의 설정이나 특정한 요인의 영향에 대한 정확한 한계치의 설정보다는 각 요인에 대한 정성적인 영향을 분석하였다.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.322-329
• /
• 2020

The utilization of aluminum scrap is a subject of great importance in terms of reducing energy consumption and environmental protection. However, aluminum scrap contains impurities, which can degrade the properties of aluminum alloy, especially corrosion resistance. This study examines the effect of scrap charge rate of aluminum alloys about microstructures and corrosion characteristics. According to the metallographic examinations, Mg2Si tended to become coarser and its uniformity was decreased by increasing aluminum scrap charge rate. The immersion test exhibited corrosion progressed through the eutectic areas due to micro-galvanic interactions. Electrochemical measurements revealed that excess aluminum scrap could reduce the intergranular corrosion resistance of aluminum alloys. Results showed that the scrap charge rate is important factor in the design of corrosion resistance of aluminum die casting alloys.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.31-37
• /
• 2015

Composition-controlled ternary components chalcogenides germanium tin sulfide ($Sn_xGe_{1-x}S$) nanoparticles were synthesized by a novel gas-phase laser photolysis reaction of tetramethyl germanium, tetramethyl tin, and hydrogen sulfide mixture. Subsequent thermal annealing of as-grown amorphous nanoparticles produced the crystalline orthorhombic phase nanoparticles. All these composition-tuned nanoparticles showed excellent cycling performance of the lithium ion battery. The germanium sulfide nanoparticles exhibit a maximum capacity of 1200 mAh/g after 70 cycles. As the tin composition (x) increases, the capacity maintains better at the higher discharge/charge rate. This novel synthesis method of tin germanium sulfide nanoparticles is expected to contribute to expand their applications in high-performance energy conversion systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.624-634
• /
• 1998

The photoelastic model material with shape memory effect and the molding processes for the material are developed in this research. The matrix and fiber of the photoelastic model material developed in this research are epoxy resin (Araldite to hardner 10 to 3 (weight ratio)) and wire of $Ti_50-Ni_50$ shape memory alloy, respectively. It is called Ti50-Ni50 Shape Memory Alloy Fiber Epoxy Composite $(Ti_50-Ni_50SMA-FEC).$ Ti50-Ni50 SMA-FEC is satisfied with the requirements of the photoelastic model material and can be used as a photoelastic model material. The maximum recovering strain of $Ti_50-Ni_50$SMA-FEC is occurred at $80^{\circ}C$ in any prestrain of $Ti_50-Ni_50$ shape memory alloy fiber and in any fiber volume ratio. Recovering strain(force) is increased with the increment of the prestrain and the fiber volume ratio. The best prestrain of $Ti_50-Ni_50$SMA-FEC is 5% for the recovering force among 1%, 3%, 5%.