• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.182-182
• /
• 2016

철강은 기본적으로 강도가 우수하고 그 매장량이 풍부할 뿐만 아니라 대량생산이 가능하다 또한 다른 금속과 합금을 구성하여 또 다른 특성을 부여할 수 있기 때문에 현재 전 세계 금속 생산량의 95%를 차지할 정도로 많이 사용되며, 각종 산업과 기술이 발달함에 따라 그 중요도는 점점 더 커져가고 있다. 하지만 철강은 사용 환경 중 부식에 의해 그 수명과 성능이 급격히 저하되기 때문에 내식성을 향상시키기 위하여 도장이나 도금 등의 표면처리를 포함한 다양한 방법이 적용되고 있다. 그 중 철강재의 도금 표면처리방법은 주로 아연을 이용한 용융도금이나 전기도금 등과 같은 습식 프로세스가 널리 사용되고 있다. 여기서 아연은 철보다 이온화 경향은 크나 대기 환경 중 산소와 물과 반응하여 Zn(OH)2와 같은 화합물을 형성함으로써 철강재 표면상 부식인자를 차단(Barrier)함은 물론 사용 중 철 모재가 노출되는 결함이 발생하는 경우에는 철을 대신하여 희생양극(Sacrificial Anode) 역할을 하기 때문에 철의 부식방식용 금속으로 가장 많이 사용되고 있다. 한편 최근에는 철강의 사용 환경이 다양해짐은 물론 가혹해지고 있어서 이에 따른 내식성 향상이 계속해서 요구되고 있는 추세이다. 따라서 본 연구에서는 철강재의 내식성을 향상시키기 위한 일환으로 현재 많이 사용되고 있는 용융아연도금 강판 상에 아연보다 활성이 높은 마그네슘(Mg)을 건식 프로세스 방법 중에 하나인 PVD(Physical Vapour Deposition)법에 의해 코팅하는 것을 시도하였다. 일반적으로 PVD법에 의해 진공증착하는 경우에는 그 도입가스로써 불활성가스인 아르곤(Ar)을 사용하는 경우가 대부분이나 여기서는 상대적으로 비활성이면서 그 크기가 작은 질소(N2)가스를 도입하여 그 증착 막의 몰포로지는 물론 결정구조도 제어하여 그 내식특성을 향상시키고자 하였다. 본 연구에서는 철강재의 내식성을 향상시키기 위한 방법으로 마그네슘(Mg)를 PVD(Physical Vapor Deposition)법 중 진공증착법(Vacuum Deposition)을 사용하여 용융아연도금 강판 상에 마그네슘 증착 막을 형성하였다. 즉, 여기서는 진공증착 중 질소(Nitrogen, N2)가스를 도입하여 진공챔버(Vacuum Chamber)내의 진공도를 $1{\times}10^{-1}$, $1{\times}10^{-2}$, $1{\times}10^{-3}$, $1{\times}10^{-4}$로 조절하며 제작하였다. 또한 제작된 시편에 대해서는 SEM(Scanning Electron Microscope) 및 XRD(X-Ray Diffraction)을 사용하여 형성된 아연도금상 마그네슘 막의 표면 몰포로지 및 결정구조의 변화를 분석함은 물론 침지시험, 염수분무시험, 분극시험을 통해 이 막들에 대한 내식특성을 분석 평가하였다. 상기 실험결과에 의하면, 진공 가스압이 증가됨에 따라 마그네슘 막의 두께는 감소하였으며, 그 몰포로지의 단면은 주상정(Columnar)에서 입상정(Granular) 구조로 변화하며 표면의 결정립은 점점 미세화 되는 경향을 나타냈다. 이때의 표면의 결정배향성(Crystal orientation)은 표면에너지가 상대적으로 큰 면이 우세하게 나타나는 경향이 있었다. 또한 본 실험에서 형성한 진공증착 막은 비교재인 용융아연도금강판보다 우수한 내식성을 나타냈고, 본 형성 막 중에는 마그네슘 막 두께가 작음에도 불구하고 질소 가스압이 가장 큰 조건일수록 내식성이 우수한 경향을 나타냈다. 이상의 결과는 철강재의 내식성 향상을 위한 응용표면처리설계에 기초적인 지침을 제공할 수 있을 것으로 기대된다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.113-117
• /
• 2005

In the modern days, a galvannealed sheet steel (GA) instead of a cold rolled steel sheet has been widely used as an alternative to extend the life of automotive body. Accordingly, the mechanical properties of GA for automobiles were taken into account and studied by comparing with the temperature variation on annealing in this study. To clarify the effect of surface features in the mechanical and frictional properties of GA, the several tests such as nanoindentation, victors hardness and nano scratch test were executed. The developed neural networks apply also to obtain reliable mechanical properties of the thin films. Load-displacement curve was computed by the analysis procedure and compared with experimental results. The frictional characteristics of coating layers in GA were verified though nano scratch test in this study. The friction coefficient of coating layers on the surface was obtained from the nano scratch. The variation of friction coefficient versus velocity and pressure was taken into consideration in this paper.

• Journal of Surface Science and Engineering
• /
• v.32 no.2
• /
• pp.134-143
• /
• 1999

The effects of silicon on galvannealing behavior of interstitial-free (IF) steels were studied. The growth rate of the Fe-Zn alloy layer was retarded as silicon in the steel added. Titanium in steel strongly favors Fe-Zn reaction, in particular outburst structures, whereas silicon inhibit them. Cross-sectional and planar views of galvannealed coatings were investigated to characterize alloy phase development. A possible mechanism to explain the retardation effect of silicon is discussed in terms of concentration on surface and inhibition layer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.142-142
• /
• 2015

아연-마그네슘 합금은 마그네슘 첨가로 인한 뛰어난 내식성과 아연의 자원 고갈에 대한 갈등을 해소할 수 있다는 장점을 가지고 있으므로 차세대 강판 도금 소재로서 주목받고 있다. 그러나 아연-마그네슘의 도금 공정은 상대적으로 높은 융점을 지닌 마그네슘 첨가로 인해 기존의 아연 도금 공정에 비해 고온에서 이루어지므로 용융 금속에 의한 도금 설비의 빠른 손상이 발생하게 된다. 따라서 이와 같이 고온 환경에서도 사용 가능한 수준의 내구성을 지닌 소재의 개발이 반드시 필요한 상황이다. 선행 연구에 의하면 Mo은 아연-마그네슘 용탕에서 우수한 내침식 특성을 보이는 것으로 확인되었지만 pure Mo의 경우 고온 산화에 취약한 단점을 가지고 있어 내구성에 한계를 보인다. 따라서 본 연구에서는 이러한 문제를 해결하기 위해 pack cementation 공정을 통해 Mo 표면에 내산화 특성이 우수한 Mo 금속간화합물($MoSi_2$, $Mo_3Si$, $Mo_5SiB_2$)을 형성시켰고 이를 대상으로 아연-마그네슘 용탕에 대한 내산화 거동을 평가하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.91-99
• /
• 2007

Fractures of galvannealed coating layer during actual press forming in automotive applications were observed by scanning electron microscopy in order to understand fracture mechanism. Fracture behaviors of galvannealed coating layer in extra deep drawing quality steels and high strength steels have been studied by performing the tests describing the representative plastic deformation in sheet metal forming such as uni-axial tensile test, compression test, bi-axial test and plane strain test. Growth and direction of cracks were deeply related to the plastic deformation modes and history. The material properties of galvannealed coating layer were investigated by nano-indentation test equipped with Berkovich diamond indentor for the specimens. Hardness and elastic modulus of the coating layer were higher than bared steels and that was the reason for crack of coating layer. Flat friction test and drawbead friction test were performed to observe the effect of the surface morphology on the frictional characteristics. The micro-plasto hydrodynamic lubrication were appeared and played an important role in reducing the coefficient of friction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.389-392
• /
• 2005

In the modern days, a galvannealed sheet steel(GA) instead of a cold rolled steel sheet has been widely used as an alternative to extend the life of automotive body. Accordingly, the mechanical properties of GA for automobiles were taken Into account and studied by comparing with the temperature variation on annealing in this study. To clarify the effect of surface features in the mechanical properties of GA, the several tests such as nanoindentation and FE-analysis were executed. For this goal use is made of the method of neural networks. The developed neural networks apply also to obtain reliable mechanical properties of the thin films. Load-displacement curve was computed by the analysis procedure and compared with experimental results.

• Journal of Surface Science and Engineering
• /
• v.34 no.3
• /
• pp.247-257
• /
• 2001

In an effort to improve the dent resistance of exterior body panels at a reduced steel thickness, the bake hardenable steels added Ti or Nb with tensile strength of 35Kgf/$\textrm{mm}^2$ were investigated. The bake hardenability increased with the annealing temperature and solute carbon content. Bake hardening of 3 to 5Kgf/$\textrm{mm}^2$ was obtained in steels with a controlled solute carbon concentration range from 6 to 10ppm. The galvannealing temperature and time had little influence on the bake hardenability. The Fe-Zn alloying reaction of 35Kgf/$\textrm{mm}^2$ BH steel was remarkably retarded due to a 0.07%P addition. The optimum galvannealing temperatures of 35Kgf/$\textrm{mm}^2$ BH steel were ranged from 520 to 56$0^{\circ}C$ in view of the Fe content and powdering resistance. The cross-section and planar views of the galvannealed coatings to characterize morphology development were discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.215-222
• /
• 2007

Coating of Hot-dip galvannealed steel consists of various Fe-Zn intermetallic compounds. Since the coating is hard and there for is very brittle, the surface of steel sheet is easy to be ruptured during second manufacturing processing. This is called as powdering. In addition, forming equipment might be polluted with debris by powdering. Therefore, various research have been carried out to prohibit powdering fur improving the quality of GA steel. This paper carried out finite element analysis combined with damage model which simulate the failure of local layer of hot-dip galvannealed steel surface during v-bending test. Since the mechanical property of intermetallic compound was unknown exactly, we used the properties calculated from measurements. The specimen was divided into substrate, coating layer and interface layer. Local failure at coating layer or interface layer was simulated when elemental strain reached a prescribed strain.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2019

We have developed the multi-functioned friction measuring instrument for the previous research. In here, we improved the performance of friction measuring instrument by applying the adaptive smoothing method and analyzed the friction of plate and monitoring function of friction surface through scratch tests. We substituted lubricant steel plate to lubricant oil used for reducing the friction when fabricating steel plate because lubricant oil was regarded as one of the major causes for the environmental pollution. In particular, the functions of various plate such as galvannealed steel sheets were analyzed because friction coefficient could be changed depending on the type of organic/inorganic plate or state of coating layer. Therefore, we demonstrated that adaptive smoothing method could enhance the accuracy of measuring instrument which eliminate the noise. As a result of using the method, it showed the reduction rate 0.0417% for the friction coefficient 0.16.

• Journal of Surface Science and Engineering
• /
• v.33 no.2
• /
• pp.135-144
• /
• 2000

Hot-dip galvannealed sheet (GA) with high strength of $45kg/mm^2$ in tensile strength, has developed for automotive applications. However, for a successful application, the powdering behaviour of GA must be minimized. The powdering of galvannealed coatings was reduced as the silicon content in the steel increased. Rapid heating and rapid cooling rate during the galvannealing process improved the powdering resistance due to the suppression of not only the ξ phase, but also the $ \Gamma _1$, phase. An analysis of the Fe-Zn alloy phases and its relation to the powdering behaviour are discussed with SEM micrographs.