• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.427-432
• /
• 2006

The effects of free ammonia (FA) concentration and temperature on nitrite accumulation were studied. To estimate the most effective ammonium oxidation and nitrite build-up condition, nitrification tests were conducted in batch conditions at various FA concentrations, and at different ammonium concentration and temperature. The activation energies of ammonium oxidizer were 81.7 KJ/mol below $20^{\circ}C$, and 32.5 KJ/mol over $20^{\circ}C$, while that of nitrite oxidizer was 35.5 KJ/mol irrespective of temperature variations. The results of nitrification tests conducted at different FA concentrations and temperatures showed that temperature strongly affects nitrite accumulation, while effects due to FA concentrations were found negligible.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.23-23
• /
• 2020

하구 관측은 조사 방법 및 주기에 따라 크게 두 가지로 구분되는데, 첫째는 현장에서 직접 주기적으로 자료를 수집하는 정기 현장관측과 다른 하나는 고정된 지점에 관측소를 설치하여 실시간으로 연속된 자료를 수집하는 실시간 관측으로 분류된다. 본 연구는 하구 관측망 체계를 확립하기 위한 기초 연구로서 금강하구역을 대상으로 모의된 수치 모델 자료를 이용하여 관측망을 설계하기 위한 대표 모니터링 지표를 선정하고, 이를 기반으로 관측 지점을 설계하기 위한 전략을 제시하였다. 대표 모니터링 지표는 실제 현장에서 일반적으로 취득할 수 있는 6가지 항목(수온, 염분, 용존산소, 클로로필a, 총질소, 총인)을 대상으로 EOF 분석을 실시하여 해역의 시공간 분포를 대표할 수 있다고 판단되는 2개의 항목을 선정하였다. 대표 모니터링 지점은 2개의 대표 모니터링 지표에 대한 고유 벡터 사이의 각도를 벡터의 내적으로 계산하고 이를 설계변수로 활용하여 도식최적화 기법을 통해 각 모니터링 항목들에 대한 공간 분포를 가장 잘 재현해 낼 수 있는 지점의 개수와 위치를 선정하였다. 선정된 모니터링 지점들을 이용하여 재구성된 공간 분포를 참값(수치모델)과 비교하여 통계적 적정성 여부를 평가하였으며, 이를 통해 금강하구의 대표 모니터링 지점들을 도출 해 내었다. 금강하구의 정기 현장 관측에 대한 대표 모니터링 지점은 7개로 선정되었으며, 이들은 6가지 관측 항목들에 대해서 매우 높은 공간분포 재현율을 확보할 수 있음을 확인하였다. 또한, 담수가 비정기적으로 방류되는 금강하구 시스템의 지역적 특성에 대한 시계열 정보를 연속적으로 가장 잘 취득할 수 있는 실시간 관측소 설치 영역을 결정하기 위하여, 7개의 대표 모니터링 지점에서의 시계열 정보를 금강하구둑 전면과 외해의 시계열 정보와 비교분석하여 설치가능 지점을 영역으로 제언하였다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.8
• /
• pp.5-15
• /
• 2019

This study was conducted to propose a reasonable requirement regulation of cutoff barriers composed of bottom layer and vertical barrier of offshore landfill for the prevention of contaminant leakage. The bottom layer was composed of impermeable clay layer; vertical walls were composed of double walls; outer wall was composed of steel sheet pile which registed against outer force; cutoff vertical barrier took the role of inner wall. Seepage-advection-dispersion numerical analysis was conducted using SEEP/W and CTRAN/W programs under steady and unsteady flows. The results showed that the values calculated under steady flow showed higher migration of pollutant than those of unsteady flow. The values calculated under steady flow are more valid from a design point of view. Under steady flow and the bottom clay layer and when the vertical barrier are homogeneous and completely well installed, respectively, the minimum required cutoff regulations for hydraulic conductivity, thickness, and embedded depth of the bottom clay layer and vertical barrier were suggested.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.9
• /
• pp.59-69
• /
• 2010

This study is experimentally investigated for characteristics of lightweight air-trapped soils with uniform quality. Previously, EPS (Expanded PolyStyrene) blocks are often used as lightweight embankment, but many problems such as the level difference and cracks were caused by plastic (creep) deformation. So, a new material development is urgent. By means of alternatives, lightweight air-mixed soil using in-situ soils has been developed and applied to fields. In comparison with EPS block, lightweight air-mixed soil has less plastic (creep) deformation in long period, but the strength characteristics are different according to the soils where they are obtained. Therefore, the quality management of lightweight air-mixed soil is very difficult. Therefore in this study, characteristics of lightweight air-trapped soil using a manufactured sand with uniform quality are investigated. To found out the compression and tensile characteristics of lightweight air-tapped soils, unconfined compression test and splitting tensile test are conducted on the specimens prepared with different unit weight, cement-sand ratio and air-pore.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1238-1243
• /
• 2022

The International Maritime Organization is at the forefront of strengthening gas emission regulations for ships globally. The Korean government needs to apply measures to reduce emissions, such as setting a basic roadmap for greenhouse gas reduction. In addition, there is an urgent need to introduce a new efficient propulsion system that can reduce gas emissions. This includes applications to fishing vessels, which account for 90.6% of the greenhouse gas emissions from ships sailing along domestic coasts. In this study, an electric-combined propulsion system applicable to domestic coastal fishing vessels was developed. The target ship to which the electric-combined propulsion system could be applied was selected. A simulation system was constructed using MATLAB/Simulink to compare the expected fuel consumption when applying the developed complex electric propulsion system to the propulsion system mounted on the selected target fishing vessel. Through simulations, the differences in fuel consumption between the mechanical propulsion system and the electric hybrid propulsion system (both when charging and not charging the battery on land) were confirmed. The results show that fuel consumption can be decreased by approximately 13% and 16% when applying the electric-combined propulsion system.

• Membrane Journal
• /
• v.32 no.3
• /
• pp.173-180
• /
• 2022

Presence of ammonia in drinking water is very toxic to human health. Soluble ammonia contaminates ground water due to activities such as the use of fertilizer in crop, industrial effluents and burning of fossil fuel. Even low concentration of ammonia present in water will damage aqua environment such as marine organism. Membrane technology is an important process to remove ammonia from effectively from water. Flat sheet membrane, membrane contactor and membrane distillation are some of the methods used for water purification from ammonia. Membrane contractor is an efficient process in which ammonia is removed through liquid-gas or liquid-liquid mass transfer without change of phase unlike membrane distillation. However, the cost of ammonia removal in this method is high due to maintenance of very high pH. Zeolite has excellent ion exchange ability that enhances its ability to interact with ammonia and adsorb from wastewater. Mixed matrix membranes containing zeolite enhance the efficiency of ammonia adsorption and separation from wastewater. In this review the above discussed issues are summarized in detail.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.91-99
• /
• 2016

The global demand for oil and natural gas has increased, and resource development is moving to the deep sea. Floating and flexible offshore structures such as semi-submersible, spar, and FPSO structures have been widely used. The major equipment of floating structures is always exposed to waves, currents, and other marine environmental factors, which cause structural damage. Moreover, flexible risers are susceptible to an exciting force due to the motion of the floating body. The inline and transverse responses from the three-dimensional behavior of a floating structure occur because of various forces. Typical risers are made of steel pipe and applied in the oil and gas development field, but flexible materials such as polyethylene are suitable for OTEC risers. Consequently, the optimal design of a flexible offshore plant requires a dynamic behavior analysis of slender bodies made of the different materials commonly used for offshore flexible risers. In this study, a three-dimensional motion measurement device was used to analyze the displacements of riser models induced by external force factors, and forced oscillation of a riser was linked to forced oscillation under a steady flow and regular wave condition.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.241-247
• /
• 2017

Plywood, which is created by bonding an odd number of thin veneers perpendicular to the grain orientation of an adjacent layer, was developed to supplement the weak points such as contraction and expansion of conventional wood materials. With structural merits such as strength, durability, and good absorption against impact loads, plywood has been adopted as a structural material in the insulation system of a membrane type liquefied natural gas (LNG) carrier. In the present study, as an attempt to resolve recent failure problems with plywood in an LNG insulation system, conventional PF (phenolic-formaldehyde) resin plywood and its alternative MUF (melamine-urea-formaldehyde) resin bonded plywood were investigated by performing material bending tests at ambient ($20^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures to understand the resin and grain effects on the mechanical behavior of the plywood. In addition, the failure characteristics of the plywood were investigated with regard to the grain orientation and testing temperature.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.34-44
• /
• 2015

A hydraulic tensile test machine (HSTM) is one of the devices used to obtain the flow stress of a material during high-speed elongation. This paper first describes some features of a newly built HSTM. The improvement histories of the upper and lower jigs, which are the most vital parts of the HSTM, are also presented. We have frequently witnessed test failures with 1st generation jigs and specimens due to slip between the jig and specimen. 2nd generation jigs provide more stable test results, but the use of a longer upper jig induces excessive vibration and consequently makes it difficult to attach an environment chamber. 3rd generation jigs have some advances in terms of the symmetric fastening between the upper jig and specimen, as well as an exemption from direct contact between the lower jig and specimen. The performance of an environment chamber is verified by high and low temperature tests. A high-speed displacement measurement system is introduced based on a high-speed camera and motion-tracking software with aid of a surface grid device for the specimen.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.53-57
• /
• 2009

Unmanned surface vehicles (USVs) conduct various missions while exchanging information with control centers. Maritime security, coastal surveillance, and sea surface and undersea inspections are included in the important missions of USVs. To carry out these missions, large amounts of information are required from sensors, such as cameras, radars, and sonars. High bandwidth wireless communication is necessary to send this information to the control center in real time. In general, USVs are made using small boats. The motions of small boats are easily influenced by sea waves and the magnitude of changes in the attitude is large and the period of the changes is short in comparison with large ships. Thus, the direction of an antenna beam pattern for a wireless communication system in a USV can change rapidly, and with a large magnitude. In addition, since the reflection of electromagnetic waves on the sea surface is not negligible, the effect of multipath noises on the wireless communication system must be considered carefully. There are also several other elements that negatively affect wireless communication systems in USVs. This paper presents the wireless communication environment to be considered in the design and implementation of wide bandwidth communication systems for USVs. Short test results for wireless communication on the sea are also given.