• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.9-21
• /
• 2022

In this paper, we developed a 100% detection system for entering and leaving vehicles by improving the detection rate of existing detection cameras based on the LiDAR sensor, which is one of the core technologies of the 4th industrial revolution. Since the currently operating parking lot depends only on the recognition rate of the license plate number of about 98%, there are various problems such as inconsistency in the entry/exit count, inability to make a reservation in advance due to inaccurate information provision, and inconsistency in real-time parking information. Parking status information should be managed with 100% accuracy, and for this, we built a parking lot entrance/exit detection system using LIDAR. When a parking system is developed by applying the LIDAR sensor, which is mainly used to detect vehicles and objects in autonomous vehicles, it is possible to improve the accuracy of vehicle entry/exit information and the reliability of the entry/exit count with the detected sensing information. The resolution of LIDAR was guaranteed to be 100%, and it was possible to implement so that the sum of entering (+) and exiting (-) vehicles in the parking lot was 0. As a result of testing with 3,000 actual parking lot entrances and exits, the accuracy of entering and exiting parking vehicles was 100%.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.1-26
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.2
• /
• pp.89-99
• /
• 1997

Although discontinuously reinforced metal matrix composite(MMC) is one of the most promising materials for applications of aerospace, automotive industries, the thermal residual stresses developed in the MMC due to the mismatch in coefficients of thermal expansion between the matrix and the fiber under a temperature change has been pointed out as one of the serious problem in practical applications. There are very limited nondestructive techniques to measure the residual stress of composite materials. However, many difficulties have been reported in their applications. Therefore it is important to establish analytical model to evaluate the thermal residual stress of MMC for practical engineering application. In this study, an elastic model is developed to predict the average thermal residual stresses in the matrix and fiber of a misoriented short fiber composite. The thermal residual stresses are induced by the mismatch in the coefficient of the thermal expansion of the matrix and fiber when the composite is subjected to a uniform temperature change. The model considers two-dimensional in-plane fiber misorientation. The analytical formulation of the model is based on Eshelby's equivalent inclusion method and is unique in that it is able to account for interactions among fibers. This model is more general than past models to investigate the effect of parameters which might influence thermal residual stress in composites. The present model is to investigate the effects of fiber volume fraction, distribution type, distribution cut-off angle, and aspect ratio on thermal residual stress for in-plane fiber misorientation. Fiber volume fraction, aspect ratio, and distribution cut-off angle are shown to have more significant effects on the magnitude of the thermal residual stresses than fiber distribution type for in-plane misorientation.

• Journal of Internet Computing and Services
• /
• v.18 no.3
• /
• pp.29-36
• /
• 2017

In these days, 3D dynamic simulation is closely related to many industries. In the past, physically-based 3D simulation was used mainly in the car crash or construction related fields, but it also plays an important role in movies or games today. Many mathematical computations are needed to represent the 3D object realistically, but it is difficult to process a large amount of calculations for simulation of application based on CPU in real-time. Recently, with the advanced graphic hardware and improved architecture, GPU can be utilized for the general purposes of computation function as well as graphic computation. Many approaches using GPU have been applied for various research fields. In this paper, we analyze the performance variation of two cloth simulation algorithms based on GPU according to the change of execution properties of GPU shaders in oder to optimize the performance of GPU-based cloth simulation. Cloth simulation is implemented by the spring centric algorithm and node centric algorithm with GPU parallel computing using compute shader of GLSL 4.3. We compare the performance of between these algorithms according to the change of the size and dimension of work group. The experiment is repeated to 10 times during 5,000 frames for each test and experimental results are provided by averaging of FPS. The experimental result shows that the node centric algorithm is executed in higher speed than the spring centric algorithm.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.53-58
• /
• 2005

The use of computers for control and monitoring of industrial process has expanded greatly in recent years. The computer used in such applications is shared between a certain number of time-critical control and monitor function and non time-critical batch processing job stream. Embedded systems encompass a variety of hardware and software components which perform specific function in host computer. Many embedded system must respond to external events under certain timing constraints. Failure to respond to certain events on time may either seriously degrade system performance or even result in a catastrophe. In the design of real-time embedded system, decisions made at the architectural design phase greatly affect the final implementation and performance of the system. Flexibility indicates how well a particular system architecture can tolerate with respect to satisfying real-time requirements. The degree of flexibility of real-time system architecture indicates the capability of the system to tolerate perturbations in timing related specifications. Given degree of flexibility, one may compare and rank different implementations. A system with a higher degree of flexibility is more desirable. Flexibility is also an important factor in the trade-off studies between cost and performance. In this paper, it is identified the need for flexibility function and shows that the existing real-time analysis result can be effective. This paper motivated the need for a flexibility for the efficient analysis of potential design candidates in the architectural design exploration or real time embedded system.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.89-96
• /
• 2010

In general, three types of fingerprints could be found at the crime scene: visible, plastic, and latent fingerprints. Examples of visible fingerprint include those made by blood, paint or ink. Plastic fingerprint are made from an impression of the finger on soft material as soap, wax, etc. Latent fingerprint are those of the invisible one to the human eye. Oil-contaminated fingerprints remained in the evidence, that are contaminated with the soybean oil, engine oil, lubricating oil or grease. Oil-contaminated fingerprints are special types of fingerprint evidence but the research for developing method regarding oil-contaminated fingerprints is a few. In this study, ultraviolet light source was employed for untreated oil-contaminated prints and the freeze-dry method with liquid nitrogen for freeze oil residue on the surfaces with sequence of developing oil-contaminated fingerprints with black and magnetic powders, cyanoacrylate (CA) fuming, Basic Yellow 40. The types of oil chosen for the experiment were soybean oil, LSA oil, engine oil and material surfaces selected for the experiment were glass, plastic aluminum plates. The aims of this study were to determine the appropriate developing methods for oil-contaminated fingerprints.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.105-112
• /
• 2014

Purpose - This research undertakes to understand the trade structures of both China and Japan to strengthen Sino-Japan economic cooperation and examines impediments to trade between the 2 countries to analyze causes which affect trade and to examine improvements in these areas to find out ways of trade expansion. Through this survey of a defined period of time, we can identify the structural factors of trade dependence in the relationship between China and Japan. Research design, data, methodology - The data were collected from Korea Traders Association, Korea Customs Office and UN Comtrade, from which whole table indexes are calculated by author. This research methodology uses trade related indexes to focus on analyzing comparative advantages based on time-series analysis statistics data (2000~2012), by using the analysis index of Trade Intensity Index (TII), Revealed Comparative Advantage Index (RCA) and Trade Specialization Index (TSI). Results - The export ratio for China against Japan was a little higher in 2000 at 2.867 and the export ratio for China against Japan was sustained in 2005. However, it diminished gradually and reached 1.263 in 2012. During the whole period of 2000~2012, the indexes were maintained without any significant change. However, they are still moving closer to -1. Especially, in 2012 it is the closest it has been to -1. Therefore, Japan has a comparative advantage toward export specialization. On the other hand, China has a comparative advantage toward import specialization. For the whole research period, all indexes were much smaller than 1, which means that China has comprehensively had a comparative disadvantage against Japan for the past 10 years when compared to other industries, even though it had improved in 2000. Conclusions - The summary of conclusions based on empirical analysis research are as follows: First, per the Trade Intensity Index of industries between the 2 countries, we can conclude that export ratio index is 2.867, based on the formula, in 2000, which means the export ratio of China against Japan is a little bit higher. Furthermore, the ratios of 2.259 and 1.263 are indicated in 2005 and 2012 respectively which mean the export ratio of China against Japan was maintained in 2005 but was diminishing gradually as the index is 1.263 in 2012. Second, per the Trade Specialization Index of the shipping industry between China and Japan, -0.379 is indicated in 2000, -0.368 in 2005 and -0.568 in 2012. Looking at the whole period of 2000~2012, the indexes were maintained without any significant change. However, they are still moving closer to -1. Especially, in 2012 it is the closest it has been to -1. Third, per the Revealed Comparative Advantage Index of the automobile industry between China and Japan, the RCA indexes in 2005 and 2012 are 0.246 and 0.306 respectively which are still far from 1 even though the index is improved compared to 2000's value of 0.0001. Therefore, the Chinese automobile industry is very much at a comparative disadvantage to that of the Japanese automobile industry.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.517-528
• /
• 2013

The modular technology has been already applied in automotive industry, plant and shipbuilding industry. Recently, the modular technology was applied in bridge construction. The modular bridge is different from the existing precast bridges in terms of standardized design that the detailed design of members is omitted by using the standard modules; the design of the modular bridge is completed by only assembling the standard modules without design in member level. The girder-type precast modular bridge has been developed as a simply supported bridge. The girder-type precast modular bridge could be applied to the multi-span bridges through the continuity method. The continuity of the girder-type precast modular bridge is achieved by using the link slab which is easy to construction and appropriate to the rapid construction. The link slabs have been used as the type of reinforced concrete structure in US from the 1950's. In 2000's, the link slab using the engineered cementitious concrete (ECC link slab) has been developed. In this study, the RC type link slab which is more reproducible and economic relative to the ECC link slab was used for the continuity of the girder-type precast modular bridges, and the construction detail of RC type link slab was modified. In addition, the modified iterative design method of RC type link slab was proposed in this study. To verify the proposed design method, the flexural tests were conducted using the RC type link slab specimens. Also, the fatigue test using the mock-up specimen was conducted with cyclic loading condition up to two million cycles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.716-721
• /
• 2015

As the severity of environmental pollution has increased, restrictions on air pollution have been strengthened. Stringent regulations have been imposed, not only on marine diesel engines but also on automotive and industrial power plants. Thus, biofuels have been directly applied in practical engines and used in training ships for basic research. Even though a high biofuel percentage cannot be used in a training ship engine for safety reasons, because this type of engine is larger than those used in institutional laboratories, the results will provide important basic information that will allow organizations to determine the status of a large output. Biodiesel fuel was studied to determine how it would affect the combustion characteristics and exhaust emissions of a marine diesel generator engine. The main results can be summarized as follows. Because the physical and chemical compositions of biofuels are similar to those of diesel fuel, it was found that their practical use was possible in a training ship. The specific fuel consumption and NOx increased, whereas a tendency was found for carbon monoxide and soot to decrease. In addition, no significant pressure change difference was found between the diesel fuel and biofuels.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.