• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.235-253
• /
• 2006

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the Korean margin leading to the separation of the Japan Arc. The Korean margin is rimmed by fundamental elements of rift architecture comprizing a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. In the northern part, rifting occurred in the Korea Plateau, a continental fragment extended and partially segmented from the Korean Peninsula, that provided a relatively broader zone of extension resulting in a number of rifts. Two distinguished rift basins (Onnuri and Bandal Basins) in the Korea Plateau we bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. In contrast, the southern margin is engraved along its length with a single narrow rift basin (Hupo Basin) that is an elongated asymmetric half-graben. Rifting at the Korean margin was primarily controlled by normal faulting resulting from extension in the west and southeast directions orthogonal to the inferred line of breakup along the base of the slope rather than strike-slip deformation. Although rifting involved no significant volcanism, the inception of sea floor spreading documents a pronounced volcanic phase which seems to reflect slab-induced asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin can be explained by the processes occurring at the passive continental margin with magmatism intensified by asthenospheric upwelling in a back-arc setting.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.18-24
• /
• 2023

After the Great East Japan Earthquake, many reports and books that compiled testimonies of adult victims were published. Thus, refugee situations are well known, but information on the refugee situations of Japanese students is not. This is because what actions the students took and how they sought refuge from an earthquake or tsunami have not been fully recognized. The purpose of this study was to examine and analyze students' refuge behavior in the Great East Japan Earthquake and to predict the refuge behavior of students affected by future disasters. The results of the study showed that students passively acquired information about earthquakes and tsunamis and that their refuge behavior was highly dependent on adults. Immediately after an earthquake, people tended to protect themselves and stay in place until the shaking stopped. However, they tended to move to another place after the shaking occurred frequently. Students living on ria coastlines were likely to move to high places to escape the threat of earthquakes and tsunamis, whereas students living in plain regions were likely to move vertically to tall buildings, such as schools. As for the mode of movement to refugee shelters, the students arrived at the final refugee shelters in one move, and it is assumed that the refugee shelters should be decided in advance and the students should move there.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.217-223
• /
• 2010

This study was conducted to reclassify Dongsong series based on the second edition of Soil Taxonomy and to discuss the formation of Dongsong series distributed on the lava plain at Cheolweon in Korea. Morphological properties of typifying pedon of Dongsong series were investigated, and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Dongsong series has brown (7.5YR 4/2) silty clay loam Ap horizon (0-16 cm), brown (7.5YR 4/2) silty clay loam BA horizon (16-22 cm), brown (7.5YR 4/2) silty clay Bt1 horizon (22-50 cm), reddish brown (5YR 5/4) silty clay Bt2 horizon (50-92 cm), and brown (7.5YR 4/3) silty clay loam Bt3 horizon (92-120 cm). It occurs on lava plain derived from baslt materials. The typifying pedon has higher bulk density than 0.90 Mg $m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to more than 120 cm, and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. It can be classified as Ultisol, not as Andisol or Alfisol. It has aquic conditions for some time in normal years in one or more horizons within 50 cm of the mineral soil surface, redoximorphic features between a depth of 25 cm, and a depth of 40 cm from the mineral soil surface, and redox concentrations, and 50%or more redox depletions with chroma of 2 or less in the matrix within the upper 12.5 cm of the argillic horizon. Therefore it can be classified as Aquult. It has episaturation, and keys out as Epiaquult. It has 50% or more chroma of 3 or more in one or more horizons between a depth of 25 cm from the mineral soil surface, and a depth of 75 cm. It can be classified as Aeric Aquult. Dongsong series have 35%or more clay at the particle-size control section, and have mesic soil temperature regime. Therefore they can be classified as fine, mesic family of Aeric Epiaquults, not as fine, mesic family of Typic Epiaqualfs. The Quarternary volcanic activities occurred in Jeju Island, Ulrung Island, Baekryeong Island, Cheolweon area, and Mt. Paekdu et al. in the Korean Penninsula. Most of them belong to the central eruption type, but Cheolweon area may be of the fissure eruption type. Dongsong series occur on Cheolweon lava plains derived from basaltic materials. Most soils distributed in Jeju Island, and derived from mainly pyroclastics are developed as Andisols. But Dongsong series distributed in Cheolweon lava plains which have a relatively dry climate and derived from basaltic materials are developed as Ultisols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2343-2348
• /
• 2014

Main ground net of power plant is formed to protect human body from increase in potential gradient caused by grounding current during ground fault. Calculations during ground design are generally performed according to IEEE Std-80-2000 (Kepco Design Standard 2602). However, it is difficult to apply this Standard to water environment, and a grounding technology is required to secure grounding resistance of floating photovoltaic system. Therefore the aim of this paper is to investigate and analyze ground resistivity on the water surface and underwater of reservoir using Wenner 4-pin method, a general method of measuring ground resistivity. Also, grounding resistance of floating photovoltaic systems currently in operation was measured and analyzed using the voltage drop method suggested in the international standard (IEEE Std-81) to propose a grounding method for stable grounding of floating photovoltaic system. The resistivity at 1m below the surface of water ($126.3969[{\Omega}{\cdot}m]$) is mostly higher than resistivity at the river bed ($97.5713[{\Omega}{\cdot}m]$). Also the proposed grounding anchor method was determined as the most effective method of securing stable grounding resistance in floating photovoltaic systems and is expected to be utilized as a ground method for future floating photovoltaic generation systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.19-26
• /
• 2019

To construct buildings on limited land, the size of the building is important. The development process needs to be minimized because determining the size of a structurally safe building at the planning stage incurs considerable time and cost. This study proposes the Limit Slenderness Ratio Approximation Equation. This study examined an outrigger structure system among several systems proposed for controlling the lateral displacement in tall buildings. This study compared the Limit Slenderness Ratio Approximation Equation with the approximate equation by changing the variables of the building model, and examined the size of the building using the approximate Equation. As an analysis program, the MAIDAS architectural structural analysis program was used to conduct model-specific analysis. The appropriate scale of the building to minimize the error between the approximate value calculated by the Limit Slenderness Ratio Approximation Equation and the analysis result of the structural analysis program is as follows. As the number of outrigger installation increases, the error can be reduced; the ratio of the cores is reasonable, from 20% to 30%, and the arrangement of the column is suitable only for the outer column without an internal column.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.55-63
• /
• 2018

In this paper, we measured the propagation path loss by a ground to air flight communication test at UHF band and analyzed the results. The ground receiving terminal was located at 1,100m above sea level in Cheju Island and the airborne transmit terminal flew at an altitude of 3.5km from 150 to 220km from the ground terminal. In this case, the ground terminal and the airborne terminal are on the Line of Sight. Therefore loss in this communications environment can be predicted based on Free Space Loss. However, in this test, the sea level exists between two terminals, and due to the very small angle of incidence on the reflecting surface due to the long-range communication environment, it is not possible to accurately predict the loss of free space only. Therefore, considering that there are no surrounding obstacles and that a line of sight is secured between the end of two terminals, we applied a plane earth reflection model and a spherical earth reflection model to estimate the propagation path loss and compared with the actual test results. As a result of the comparison, the predicted propagation path loss by a spherical earth reflection model were quite similar to the actual test values.

• Journal of the Korean association of regional geographers
• /
• v.1 no.1
• /
• pp.93-101
• /
• 1995

Nam Khane watershed, in the Northern Laos, consists of limestone plateau surrounded with steep slope(above 1000m), wide piedmont hill land(300-700m) and narrow alluvial plain. Opium on the plateau and up-land rice on the hill-side are cultivated for each, but its shifting agricultural activity, which degrades the forest and soil, has caused the serious environmental problems. MOS-1 satellite image and 40 points of soil samples are analyzed to identify the distribution of the shifting cultivation and to evaluate the environmental problems for Nam Khane watershed. The land use classification map is presented on the photo 2, and the value of each land use area by elevation level and soil property are showed on the table 2 and 3, respectively. Excessive agricultural activity of shifting cultivation in the Nam Khane watershed not only decreased the forest area, but also changed the primary forest of tree into secondary woodland of shrub. On the phase of soil property, it accelerated the soil and gully erosion, and acidification. To solve these environmental problems, the most important step is to settle the agriculture from shifting cultivation to permanent cropping.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.650-658
• /
• 2017

A grounding system in a large-scale apartment complex consists of a TT grounding system when viewed in each building unit, but the characteristics of TN grounding system appears when viewed in the total ground system function. Therefore, this study examined the characteristics of a grounding system in a large-scale apartment complex using design draft, field measurements and PSCAD/EMTDC modeling. This paper proposes an algorithm for fault analysis depending on the grounding system structure in large-scale apartment complexes considering the connection of the underground culvert as well as a design algorithm for each grounding system considering the contact voltage and step voltage. The simulation results based on the proposed modeling and algorithm confirmed that it is useful for analyzing the characteristics of a grounding system in a large-scale apartment complex.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.2
• /
• pp.116-121
• /
• 2001

To observe the stimulating effects of low dose ${\gamma}$ - radiation on the dormancy breaking and physiological activity, potato (Solanum tuberosum L. cv. Dejima) were irradiated at the dose of $0.5{\sim}30$ Gy. Low dose ${\gamma}$ - radiation exhibited promoting effects on the sprouting rate within the range of optimum dose of 1 Gy and 2 Gy and on the sprout length within the range of optimum dose of 2 Gy and 4 Gy. Regardless of storage duration and irradiation doses, the number of sprouts was enhanced. The number of sprouts, which were reserved for 15 days after production (DAP), were significantly increased under 4, 8 and 16 Gy irradiation. The growth of 45 DAP sprouts was extremely stimulated under 4 Gy irradiation accompanying the increase of peroxidase activity in the plantlet. In this study, it was also suggested that the activities of antioxidative enzymes of potato plantlets were not related to the irradiation dose during the plantlet development with the exception of decrease in catalase activity.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.251-258
• /
• 1998

The purpose of this study is to develop the District-level Planning Support System (DPSS) by using GIS. The district-level planning which is related for district-level control of city, needs the various parcel-level information which is composing the urban physical environment. The information has to be stored and analyzed for recognizing the study area, then the district-level planning will be efficiently managed. The use of GIS in the process of district-level planning is restricted for the creation of thematic map. GIS is not used for the analysis of spatial patterns and planning process. This study evaluates the characteristics of current district-level planning and the basic components of urban physical environment. And the database model is built. The topology among components is defined by using the spatial relationship. Then the spatial query machine for district-level planing is developed by using ArcView 3.1, Avenue and Dialog Extension. This spatial query machine is applied for case study. This study shows 1) the possibility of the district-level planning support system for analyzing spatial relationship, 2) the needs of the up-to-date topographic map showing current building's footlines and the complete integration with cadastral maps, it will reduce the uncertainty in the spatial decision making process, 3) the methodology for the construction of spatial decision making rules, 4) the further study for the using of raster, network, image and three dimension data.