• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.305-310
• /
• 2001

The purpose of this study is to calculate delay damages for contractors. The study has been performed by investigation of delay cost occurrence status and the analysis of subway construction cases. The results of this study are as follows: 1. Delay cost( 1day) equivalent to $0.005\%$ of total construction cost by analysis case studies. 2. Including bank interest, dealy cost is analysed as the following; $1.1\~9.2\%$ of total construction cost in part extension period, $3.3\~11.0\%$ of total construction cost in total extension period. 3. In comparison between liquidated damages and delay cost, liquidated damages account for average 20.1 times of delay costs. 4. Acceleration cost will be calculate on the basis of delay cost calculation method. In the result of this method, acceleration cost is equal to delay cost at least or must be large than delay cost

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.436-436
• /
• 2023

산업혁명을 거치면서 높은 화석연료를 사용하는 제조업 중심의 산업구조와 많은 자원을 필요로 하는 도시의 집중 현상으로 지구 온난화에 따른 이상기후 발생이 증가하고 있다. 이러한 기후변화는 홍수, 태풍, 폭염 및 폭설 등의 자연재해 발생 빈도 및 규모를 증가시켜 피해가 커지고 있다. 특히 인구 및 시설들이 집중해 있어 도시의 집중 현상은 이러한 재해에 더욱 취약한 구조가 됨에 따라 피해의 규모를 가중 시키고 있는 실정이다. 전 세계적으로 기후변화 문제의 심각성을 인식하고 이를 해결하기 위해 선신국에 의무를 부여하는 교토의정서(1997년) 채택에 이어, 선진국과 개도국이 모두 참여하는 파리협정(2015년)을 채택하였고 2016년 협정이 발효되었다. 파리협정의 목표는 산업화 이전 대비 지구 평균온도 상승을 2℃보다 아래로 유지하고, 나아가 1.5℃로 억제하기 노력하는 것을 강제하는 것으로 2050년까지 탄소 순배출량을 '0'으로 만든다는 탄소중립사회로의 전환이 본격적으로 시작되었다. 본 연구에서는 기후변화로 인한 물부족 및 수실오염과 같은 도시의 수자원 문제 해결을 위해 IoT 기반 센서 및 네트워크 기반 수자원 플랫폼을 개발하였다. 도시 수자원 시설 데이터를 기반으로 대체 수자원 확보 및 수요 중심의 물 관리를 통해 효율적인 물 배분이 될 수 있도록 하였으며 이러한 스마트 물 관리에 따른 대체 수자원 확보 및 효율적 물 배분이 탄소 저감에 미치는 효과에 대해 분석하였다. 연구대상 지역은 세종 6-4구역으로 LID 특화지구로 조성되었으며 1,000 세대의 주민이 생활하는 공동주택이다. 물 순환(LID) 시설에서 확보된 물을 물 공급 시설과 연계하여 공동주택에서 활용함으로써 감소된 상수 사용량을 온실가스 배출량으로 환산하여 탄소 저감량을 계산하였다. 실제 주민들(1,000세대)이 사용하고 있는 상수량 데이터와 전력거래소 온실가스 배출계수를 활용하였으며 물순환(LID) 시설로 확보하여 대체할 수 있는 상수량은 10%로 가정하였다. 연구대상 지역(1,000세대)의 연간 상수공급량은 331,603m³이며, 연간 전력사용량은69,637kWh이다. 온실가스 배출량은 31.963tCO₂eq이며, 온실가스 저감량은 3.2tCO₂eq로 산정되었다. 추후 LID 시설에 대한 상수 대체량과 온실가스 저감효과 정량화가 필요하다.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.19-24
• /
• 2018

The long-term research and development for the production of domestic blades has been consistently performed. As the direct and indirect results of its nationwide technologies in precision casting have been improved as well as maintenance costs for turbine machinery has been reduced. Whereas, there are still not a few concerns about the reliability of newly manufactured blades in spite of the quality certificate in metallurgical and mechanical properties. A spin tester is a machine that gives centrifugal loading to a rotating part, and its practical application is the overspeed test that is usually used to check the quality of products. A new spin rig has been constructed in KEPCO Research Institute for the purpose of evaluating the reliability of blades. In this paper, the test methodology for low cycle fatigue damage mechanism as well as the overspeed test for newly developed blades is described, and their reliability is evaluated too.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.343-350
• /
• 2022

The computerization project for underground facilities in Korea began in earnest after the city gas explosion in Seoul in 1994, and the Daegu subway explosion in 1995. As such a large-scale gas explosion accident caused enormous economic loss including human casualties and potential benefits, the need for computerized for efficient management of underground facilities was greatly emphasized in society. Meantime, computerization of underground facilities has been carried out according to the basic plan for building national geographic information system. In this study, problems were identified based on the current status of construction and management of underground facility information, as well as laws and regulations, and directions for establishing quality standards were presented. In addition, construction work standards such as 「Public Survey Work Regulations」, design standards, standard specifications, and technical specifications, gas technology standards, design standards, and communication works so that underground facility information can be linked and utilized in construction work by examining the linkage of the underground facilities, the targets that can be used for quality level information on underground facilities were derived, and a proposal to revise the construction standards was presented. In the future, if the quality standards are established, it is expected that the accuracy and utilization in the construction field will be increased.

• The Safety technology
• /
• no.196
• /
• pp.16-17
• /
• 2014

우리나라 안전 역사를 이끌어가고 있는 주역이자 기계안전분야의 최고 권위자 중 하나인 이근오 서울과학기술대학교 교수가 최근 새로운 도전을 시작했다. 국내 안전 관련 학술단체의 대표라 할 수 있는 한국안전학회의 15대 회장에 선출된 것이다. 이근오 신임 회장은 행정안전부 승강기 사고조사 판정위원회 초대위원장, 노사정위원회 산업재해예방시스템 선진화위원회 위원, 서울시 안전감사 옴부즈만, 한국가스안전공사 사고조사위원회 위원 등 그간 정부와 기업, 지자체를 넘나들며 안전 분야의 성장과 발전을 주도해왔다. 또한 30여 년간 강단에서 예비 안전인들을 육성하는 데에도 헌신해왔다. 이런 큰 발자취를 남긴 그가 이제는 안전분야 학자와 지식인들을 하나로 모으기 위해 본격적인 움직임에 나섰다. 이에 따라 안전학회의 향후 행보에 각계의 시선이 집중되고 있다. 이근오 회장을 만나 앞으로의 계획과 그만의 안전칠학에 대해 이야기를 나누어 봤다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.1013-1019
• /
• 2011

In this paper, simulation works for a multi-stage cascade refrigeration cycle using propane, ethylene and methane as refrigerants have been performed for the liquefaction of natural gas using Peng-Robinson equation of state built-in PRO/II with PROVISION release 8.3. The natural gas feed compositions were supplied from Korea Gas Corporation and the flow rate was assumed to be 5.0 million tons per annual. Supply temperature for propane refrigerant was fixed as $-40^{\circ}C$, that for ethylene refrigerant as $-95^{\circ}C$, and that for methane refrigerant as $-155^{\circ}C$. For the multi-stage refrigeration cycle, three-stage refrigeration was assumed for propane refrigeration cycle, two-stage refrigeration for ethylene refrigeration cycle and three-stage refrigeration for methane refrigeration cycle. Natural gas was finally cooled and liquefied to $-162^{\circ}C$ by Joule-Thomson expansion. Conclusively, 91.71% by mole of the natural gas liquefaction ratio was obtained through a cascade refrigeration cycle and Joule-Thomson expansion and 0.433 kW of compression power was consumed for the liquefaction of 1.0 kg/hr of natural gas.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.47-57
• /
• 2014

LNG plant projects tend to be implemented in overseas owing to its characteristics, so their project management scheme is somewhat different from those of general projects. Value chain in a LNG plant project includes exploration/production of gases, physical liquefaction/chemical conversion processes, transportation and storage. Key factors in the chain include liquefaction process (including ultra-low temperature liquefaction) to convert natural gas into liquid materials or fuel, and Front End Engineering Design (FEED) package, as well as Engineering, Procurement and Construction (EPC) technology comprising control, operation and construction. Success of a complex LNG plant project implemented in overseas depends on decision-making process in project management. Accordingly, to develop a decision-making model in of plant construction, the study extracted none factors in project management by EPC stage and assessed importance of each factor. The result showed that items in both project management and project risk management are important. Especially, the study developed a decision-making model in the construction stage of a LNG plant project based on the project management factors and importance assessment. The developed decision-making model would lay groundwork in building a decision-making system in construction stage of project management.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.187-192
• /
• 2016

Chemical utilization of $CO_2$ is recognized as the technology for the reduction of greenhouse gas as well as the use of carbon to resources. Although various chemicals are commercially produced, the innovative development is still necessary to utilize large quantity of $CO_2$. In this report, the current status of technology to preserve -CO-O- linkage into the molecules was introduced, particularly for the synthesis of dimethyl carbonate (DMC) and polyols, which are raw materials of polycarbonate and polyurethane, respectively. RIST developed the novel process for the DMC production via urea methanolysis and the new catalytic system for polyol synthesis. Because of high contents of $CO_2$ in both chemicals, it is expected that they are able to contribute for the reduction of greenhouse gas.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.57-68
• /
• 2024

Offshore wind power is increasingly regarded as a viable solution for reducing greenhous emissions due to the construction of wind farms and their superior power generation efficiency. Submarine power cables play a crucial role in transmitting the electricity generated offshore to land. To monitor cables and identify points of failure, analyzing the location or depth of burial of submarine cables is necessary. This study reviewed the technology and research for detecting submarine power cables, which were categorized into seismic/acoustic, electromagnetic, and magnetic exploration. Seismic/acoustic waves are primarily used for detecting submarine power cables by installing equipment on ships. Electromagnetic and magnetic exploration detects cables by installing equipment on unmanned underwater vehicles, including autonomous underwater vehicles (AUV) and remotely operated vihicles (ROV). This study serves as a foundational resource in the field of submarine power cable detection.

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.77-105
• /
• 2023

This paper investigates the management stability of KOSPI-listed energy public enterprises from the perspective of median voter theory. We analyze the profitability and stability of five energy public enterprises during the period 2011~2022, and conduct an empirical analysis to determine whether they are related to the preferences of median voters who can represent the general public. Our analysis of the profitability and stability of the energy public enterprises shows that the stability of their has been deteriorating in recent years. The results of the empirical analysis also show that the management stability of the energy public enterprises is related to the preference of median voter. Specifically, they indicate that when the median voter's income is smaller than the average income, the profitability of the utility decreases and the debt ratio increases. This paper suggests that from the median voter's point of view, excessive utility and energy bills may strengthen the incentives for governments and politicians to suppress rate increases, leading to lower profitability and higher debt for public enterprises.