• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.59-62
• /
• 2004

본 논문은 엘리베이터의 미끄럼이나 과속을 방지할 수 있는 보조 제동장치인 로프 브레이크에 관한 것으로 제동시 반력의 최대 영역 즉, 취약 부분(weak point)으로 예상되어지는 하우징 영역의 보강형상을 위치와 높이를 변화시켜서 구조해석을 수행하여 최대응력과 최대변형률을 비교 분석하여 하우징의 안전성을 검토한 후, 최적형상의 하우징을 적용시킨 로프 브레이크의 설치 각도에 따른 구조해석을 수행하여 구조적 타당성을 검토하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.649-649
• /
• 2011

미러 하우징에서 발생하는 윈드노이즈는 다양한 종류의 발생원인을 가지고 있다. 'A'-필라 와동과의 간섭으로 발생하는 것에서부터 하우징 자체의 형상 파라미터와 관련한 소음, 작은 부품간의 매칭상태에 따라 불리한 조건에서 발생하는 소음 등이 있다. 본 연구는 제조과정이나 조립과정에서 발생하는 소음이 아닌 순수 형상 변화에 따라 유동장과 소음장에 어떤 변화를 야기하는지에 대한 것으로 한정 지었으며 대표적인 디자인 파라미터 별 유동장과 소음장에 미치는 영향의 대소를 조사하였다. 조사 방법은 상용 CFD 툴인 PowerFLOW 해석을 통해 유동장 및 소음장에 대한 상세한 분석을 수행했으며 미러 디자인 측면에서 참고할 가이드를 제시하고자 했다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.237-243
• /
• 2012

The thickness optimization of the gearbox housing for 5MW wind turbine is carried out with the help of the efficient structure analysis model and the approximation model of objective function. Wind turbine gearbox is a complex structural system composed of a number of gear trains, shafts, bearing and gearbox housing, requiring a tremendous number of elements for the structural analysis and design. In this paper, an effective analysis and design model considering the tooth stiffness of helical gears is proposed. It enables to significantly reduce the total element number and the analysis time. Through the numerical optimization of housing thickness making use of the effective gearbox model and the approximate model of objective function, the total weight of the gearbox housing is minimized. It has been observed from the numerical experiment that the approximation model is reliable and the optimization result is acceptable and verified analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.975-986
• /
• 2013

This paper dealt with the fabrication and performance evaluation of the electronics housing made of lightweight composite materials, aiming at the enhancement of satellite mass savings by replacing conventional aluminum alloy widely used for satellite avionics with lightweight composite material. For this purpose, a fabrication process was designed to overcome low machinability of CFRP and to minimize the post-treatment. The composite housing with grid-stiffened and monolithic frame was made using co-curing method. Its performance was also evaluated regarding endurance, stiffness, thermal conductivity, electrical grounding, EMI protection and radiation shielding. The composite housing can provide the considerable mass savings over the aluminum housing with same dimension.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.31-34
• /
• 2003

폴리머 애자의 장기성능예측을 위하여 많은 수단과 측정방법이 연구되어 왔다. 그러나 폴리머 애자에 있어서 성능저하는 대부분 하우징 재료의 열화에 기인되고 있어 예측 및 진단목적의 연구가 하우징 재료의 가속열화에 초점이 맞추어져 있다. 폴리머 애자는 초고압 절연성능과 기계적 강도가 우수하여 송배전 설비에 많이 사용되고 있지만 애자의 형상과 장기성능과의 관계가 정량적으로 규명되어 있지 않아 개발하는 회사는 물론 사용하는 전력회사가 함께 어려움을 가지고 있다. 폴리머 애자의 형상이 폴리머 애자의 장기 성능에 어떻게 영향을 주는 지를 비교분석하고 평가하는 연구가 필요한 시점이다. 본 연구에서는 규칙 교대 갓, 불규칙 교대 갓의 폴리머 애자를 조립방식으로 제작하고, 규칙 교대 갓의 폴리머 애자를 일체형 진공사출 방식으로 제작을 하여 건조섬락전압, 주수섬락전압, 오손섬락전압을 측정하였다. 오손섬락전압은 주수섬락에 비하여 60% 정도 감소함을 보였고 불규칙한 교대 갓의 폴리머 애자의 경우 특성의 편차가 크게 나타났다. 폴리머 애자의 경우 소재의 우수한 특성도 중요하지만 형상적인 인자도 중요한 설계요소이므로 최적화 방안이 요구된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.368-377
• /
• 2013

The Urea-SCR system commercialized shows a remarkable performance to reduce NOx emission in heavy duty diesel engines. However, Urea-water solution injected upstream a mixer, which is set up inside a exhaust pipe to promote exhaust gas-atomized droplet mixing, bumps up against the wall of a exhaust pipe as the droplets flow downstream through the exhaust gas. The urea deposited on the wall of the exhaust pipe is changed into the Urea-salt, resulting in the decreased life-time of the SCR catalysts. Therefore, the development of the urea deposition avoidance technologies is being treated as an important issue of the Urea-SCR systems. An experimental study was carried out to investigate the effects of the wall flow characteristics around the mixer-housing assembly with the variation of the mixer housing surrounding and supporting the mixer, which is designed to increase the wall flow and then to reduce droplet deposition. The flow characteristics was investigated by using a hot-wire anemometry for 2-D simplified duct model, and the housing tilt angles and the position of the mixer were changed : angle of $0^{\circ}$, $1^{\circ}$, $2^{\circ}$, $3^{\circ}$, and mixer positions of 0L, 0.5L, 1L. The results showed that the wall flow onto the exhaust pipe was improved with changing the tilt angle of the mixer housing, and the wall flow improved more when the position of the mixer was on 1L.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1748-1753
• /
• 2003

This paper describes the forming of fine gear housing using RP system. In order to apply 3D model formed through CAD software to RP system, it is necessary of transforming 3D model into STL file format. Besides, when the same shape is formed repetitively, we must solve the program that the shape accuracy of prototype is irregular. Therefore, we will make an experiment on influence of 3D model, file transformation and prototype on facetres, AutoCAD system value. On the basis of experimental result, we will develop an automatic file transformation program for RP. In the final process, we will manufacture on a better prototype according to the experiment result of fine gear housing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.672-679
• /
• 2018

This paper describes a methodology for shape design using an optimal design system, whereas generally a three dimensional analysis is required for such designs. An automatic finite element mesh generation technique, which is based on fuzzy knowledge processing and computational geometry techniques, is incorporated into the system, together with a commercial FE analysis code and a commercial solid modeler. Also, with the aid of multilayer neural networks, the present system allows us to automatically obtain a design window, in which a number of satisfactory design solutions exist in a multi-dimensional design parameter space. The developed optimal design system is successfully applied to evaluate the structures that are used. This study used a stress gauge to measure the maximum stress affecting the parts of the side housing bracket which are most vulnerable to cracking. Thereafter, we used a tool to interpret the maximum stress value, while maintaining the same stress as that exerted on the spot. Furthermore, a stress analysis was performed with the typical shape maintained intact, SM490 used for the material and the minimizing weight safety coefficient set to 3, while keeping the maximum stress the same as or smaller than the allowable stress. In this paper, a side housing bracket with a comparably simple structure for 36 tons was optimized, however if the method developed in this study were applied to side housing brackets of different classes (tons), their quality would be greatly improved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.843-850
• /
• 2012

To satisfy the operational requirements of surveillance radar and the operational concept of a ship combat system, an active-array-type antenna was designed using solid-state transmitters and receivers. The arrangement of the constituent electronic components of the antenna system, considerably large in size, and therefore, the antenna needs to be housed in a box. The rotational antenna system installed on a ship mast is installed in a sealed housing to protect the interior equipment from environmental conditions. The outer shape of the housing is that the antenna should be capable of rotating normally despite strong winds. Furthermore, in recent times, designs with low radar cross section (RCS) have attracted attention from the viewpoint of improving the stealth of the ship. In this light, four types of models are proposed for the outer shape design of the antenna system, and they are investigated from the viewpoint of low RCS design as well as wind load.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.977-980
• /
• 2011

In this paper, explain to development of low pressure axial compressor performance test rig in KARI. Performance test rig consist of a entrance section, rotor, stator, shaft, rig housing, bearing housing and exit section. Test rig design structural optimization to rotor dynamics analysis of the simplified rotor-shaft assembly and flow analysis of entrance/exit section.