• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.347-354
• /
• 2006

Most patients suffering from TMD appear to have unsatisfactory masticatory function and compromised values of bite force. The purposes of this study were to investigate and compare bite force between affected and unaffected sides of patients with unilateral TMD and to evaluate its relation with duration of TMD. 42 patients with unilateral TMD, from Department of Oral Medicine, Dankook University Dental Hospital, were selected for this study. The ratio of men to women was 9:33 and their mean age of $27.2{\pm}10.4$ years. The bite forces were measured over both canines (for anterior bite force) and $1^{st}$ molars (for posterior bite force) using a bite force recorder while all the subjects were asked to clench successively for 3 seconds not until pain was felt. They were compared with those measured from bilateral TMD patients(N=6, M:F=1:5, mean age: $23.0{\pm}27.3$ years). The unilateral TMD patients were divided into time groups according to duration of TMD on the basis of 1 and 6 months, respectively. Paired and unpaired t-tests were used for statistical analysis. Unilateral TMD patients in this study showed that the affected sides had significantly lower bite force than the unaffected sides(force difference of about 7-8 kgf, p<0.05) while there was no significant sides difference in the bilateral patients. Nor did bite force on the affected sides reveal significant difference between unilateral and bilateral TMD patients. With regards to TMD duration, there was significant difference between the patients with TMD < 6 months and $\geq$ 6 months (p<0.05) while no significant difference existed between < 1 month and $\geq$ 1 month. The results of this study indicated that unilateral TMD patients can exhibit more reduced bite force on the affected sides compared with that on the unaffected sides and that bite force on the unaffected sides might be deteriorated more as longer did TMD last.

• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.95-103
• /
• 2008

Objective: This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth and to obtain the curve-ratio data in an attempt to fabricate bracket bases fit for each individual Korean permanent tooth. Methods: Three-dimensional digital models were made from 30 sets of dental casts with normal anatomic structures. According to the FA points, horizontal and vertical reference planes were established and lines were drawn on the tooth surfaces in reference to these planes. The curvature was expressed as the coefficient of a quadratic equation. Lines mesial, distal, gingival and occlusal to the horizontal, vertical reference planes and the FA point were drawn. Results: The curvature measured for each line revealed that there are no significant differences between male and female, except for maxillary canines and maxillary second bicuspids (p > 0.05). There were notable differences in the mesio-distal or gingivo-occlusal curvatures among the mandibular lateral incisors, maxillary canines, maxillary and mandibular first and second bicuspids and first molars (p < 0.05). Conclusions: The labial & buccal crown curvatures of teeth in Korean normal occlusion were measured on the mesial and distal, gingival and occlusal sides respectively in this study. Based on these data, a SWA can be developed to fit the individual features of Korean tooth crowns.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.1-12
• /
• 2009

The objective of this study was to test the effects of crown material, cement type, the direction in which stress is applied and distribution of luting cement that might lead to cement microfracture using 2D Finite Element Method. Twenty three finite element models with a chamfer margin configuration were generated for a mandibular first molar. Crown models exhibited four crown materials: type 3 gold alloy, Ni-Cr alloy, ceramic and composite resin, and two luting cements: zinc phosphate and glass ionomer cements with a thicknesses of $70{\mu}m$. Modeled crowns were loaded axially or obliquely at unit load of 1 N. Areas and levels of stress concentrations within the cement were determined. Stress in the cement layer at the margins of crowns were higher than those in the area away from the margin. Stress under oblique loads were much higher than under axial load. The stiffer crown material produced higher stress and similarly, higher stress were found in cements with the greater Young's modulus.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.559-568
• /
• 1997

For orthodontic tooth movement, optimal orthodontic force should be maintained without periodontal breakdown and alveolar bone should be remodeled physiologically Therefore, To obtain proper occlusion through tooth movement within alveolar bone, we should know the biomechanics of teeth and supporting 4issues. The present study was performed to observe histologic changes of periodontal tissue immediately after application of orthodontic force and during the retention period in growing young adult dogs. In this study, experimental group contained between mandibular left canine and 1st molar and control group contained contralateral teeth of same animal. The .018'x.022' stainless steel closed coil spring(Dentaurum Co.) was ligated on the experimental teeth at initial 200gm-force from mandibular canine to 1st molar The animals(4 to 6 months aged young adult dogs) were sacrificed on 0, 14, 28 days after the finish of appliance activation, and then tissue samples were divided into hematoxylin-eosin(HE) staining section, ground section, alkaline phosphatase(ALP) staining section, and tartrate-resistant acid phosphatase(TRAP) staining section. Thereafter, the preparations were examined under light microscopy The following results were obtained: 1. Immediately after the finish of appliance activation, the periodontal space was increased in tension side, but decreased in pressure side compared to that of control. The hyalinized zone was also observed in the periodontium. 2. After the 14-day retention, peridontal space was decreased in tension side and slightly increased in pressure side compared to that of immediately after the finish of appliance activation. The hyalinized zone was repaired and a few osteoblasts showing slightly new bone formation were seen. Osteoblasts were scarcely observed along the alveolar bone. 3. Aftter the 28-day retention, the periodontal fibers are normally repaired. A lot of TRAP(+) osteoclasts md increased alveolar bone resorption were observed in pressure side, and AP(+) osteoblast and increased new bone formation were observed in tension side.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.489-494
• /
• 2003

Odontomas are the common type of odontogenic tumors and generally they are asymptomatic, depending upon size, location and their limited growth potential. they are rarely diagnosed before the second decade of life, and the frequently lead to impaction or delayed eruption of permanent teeth. Odontomas are classified of compound as compound or complex by morphology. Complex odontomas are unorganized masses of odontogenic tissues, morphologically not resembling the teeth, account for approximately 25 percent of all odontomas, 22 percent of odontogenic tumor of the jaws, and have a predilection for the posterior mandible in males. The etiology of odontomas is unknown, although local trauma, infection, and genetic factors have been suggested. Usually, treatment of odontoma is conservative sugical removal and their is little probability of recurrence. This paper describes two cases of complex odontomas diagnosed in children due to impaction of maxillary first molar in all cases, the surgical excision of the lesions was performed. Follow-up after 2 years, showed spontaneous eruption of the first permanent molar to the occlusal plane.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.1-11
• /
• 2004

Predicting the arch length discrepancy by simply comparing the available arch perimeter with tooth materials is merely a 2-dimensional analysis of the teeth movement. However, the real teeth movement takes place 3-dimensionally and is affected by various factors such as, the arch fen the curve of Spee and the axis of the incisors. The purpose of this study is to clarify the relationship between the decrease in the arch perimeter and the horizontal positional change of the incisors after extraction of the 1st bicuspids, for more analytic evaluation of the arch length discrepancy at pre-treatment model analysis stage. In addition to that to evaluate the effect of the curve of Spee, teeth axis to the basal plane, and the incisional crowding to the treatment outcome. All patients were treated at the department of orthodontics, dental hospital, Yonsei university. Inclusion criteria for patients selection were as follows. $\cdot$ Angle classification I malocclusion with bialveolar protrusion $\cdot$ Extraction of 4 1st bicuspids $\cdot$ No tooth anomaly or prosthesis $\cdot$ No abnormal attrition $\cdot$ No ectopically erupted teeth $\cdot$ Angle classification I canine and molar relationship $\cdot$ Less than 3mm of crowding Model analysis of the above patients was performed and the following conclusions were obtained. 1. When the intercanine distance was maintained, the available space for the distal movement of the mandibular incisors after the extraction of the 4 1st bicuspids was larger than the space provided by the extraction of the 4 1st bicuspids. However the difference was less than 1mm. The more tapered the anterior arch form, the larger the difference. 2. Compared to the situation in which the intercanine distance was maintained, when the intercanine distance was expanded to meet the width of the Posterior teeth, the incisors could move about 3mm more distally. 3. The positional difference of the incisal tip was insignificant whether the central incisors were moved by tipping or bodily movement. 4. When the anterior crowding was solved without changing the intercanine distance, the larger the anterior arch length was, the more the anterior movement of the incisors. 5. When the curve of Spee was levelled, the increase in the arch perimeter was less than half of the deepest curve of Spee.

• Journal of agricultural medicine and community health
• /
• v.45 no.2
• /
• pp.79-88
• /
• 2020

연구목적: 이 연구는 지역사회 치면열구전색 사업의 치아우식 예방효과를 평가하고자 시행되었다. 연구방법: 연구 대상자는 2005년부터 2008년까지 김천시에 소재한 34개 초등학교에 재학 중인 9,001명 중 2005년 최초 구강검사 당시 상·하악 제1대구치에 치아우식이 없는 치아와 학생 4,768명을 최종 대상자로 선정하였다. 2005년도에 치면열구전색을 실시한 1,478명에 대해 3년간 추적조사가 이루어졌고, 2006년에 치면열구전색을 실시한 999명에 대해 2년간 추적조사를 하였으며, 2007년에 치면열구전색을 실시한 458명에 대해 1년간 추적조사 후 기술통계 및 교차분석을 시행하였다. 연구결과: 치면열구전색 실시군의 DMFT rate는 1년 추적 후 1.4%에서 3년 추적 후 4.1%, DMFT index는 1년 추적 후 0.18개에서 3년 추적 후 0.70개로 추적기간이 길어질수록 높게 나타났다. 1일 평균 칫솔질 횟수는 DMFT rate와 DMFT index에 영향을 미쳤다. 즉 치면열구전색을 실시한 대상자라도 1일 평균 칫솔질 횟수가 적으면 DMFT rate와 DMFT index는 높게 나타났다. 결론: 치면열구전색을 실시한 대상자에서도 올바른 칫솔질에 대한 구강보건교육이 선행되어야 한다.

• The Journal of the Korean dental association
• /
• v.47 no.4
• /
• pp.211-224
• /
• 2009

This retrospective study was to analyze the inferior alveolar nerve and lingual nerve damage after the removal of mandibular third molars. In this questionnaire study, the subjects chosen for this study were 2472 dentists who answered the questionnaire about numbness after the extraction of lower third molars. The data collected by E-mail and web site included the incidence of removal of the lower third molars, the incidence and the experience of numbness of the inferior alveolar nerve and lingual nerve, rate and duration of recovery, the influence in day life after the long-term sensory loss, the period and amount of the indemnity in the case of medical dispute. The results are summarized as follows. 1. The experience rate and the incidence rate of the inferior alveolar nerve numbness by oral surgeons in the past year were19.9% and 0.14%. Those of the lingual nerve by oral surgeon were 7.7% and 0.05%.2. The experience rate and the incidence rate of the inferior alveolar nerve numbness by the dentists except oral surgeons in the past year were 9.7% and 0.19%. Those of the lingual nerve by the dentists except oral surgeons were 5.5% and 0.11%.3. The recovery rate of the inferior alveolar nerve after 1 year and 2 years were 85.6% and 91.3%. The recovery rate of the lingual nerve after 1 year and 2 years were 84.8% and 89.3%.In conclusion, most of numbness may be recovered within 2 years. However the possibility of long term and persistent numbness should not be neglected. Therefore practitioner must inform the possibility of nerve injury and include this possibility in the consent forms.

• The Journal of the Korean dental association
• /
• v.55 no.5
• /
• pp.328-338
• /
• 2017

Introduction: The aim of the current study was to describe the prevalence and treatment of mandibular first molar eruption disturbances. Methods: A total of 38 mandibular first molars(M1mn) from 36 patients(17 males and 19 females; aged 9 years 2 months?35 years 10 months) were identified from the 13,391 patients that received orthodontic treatment from 1983?2012. The subjects were classified into 3 categories based on panoramic radiographic examination: impaction due to ectopic position of the tooth germ relative to the contra-side same tooth(Group 1), impaction due to obstruction of the eruption path with cyst or calcium mass (Group 2), and primary and secondary retention due to defects in the follicle or periodontal ligament(PDL; Group 3). The treatment outcomes were evaluated into four categories: no treatment(A), orthodontic traction(B), autotransplantation(C), and extraction due to orthodontic traction failure(D). Results: The prevalence rate of M1mn eruption disturbances in this sample was 0.27%. In Groups 1 and 2, most of the impacted M1mn were erupted successfully by orthodontic traction. In Group 3, most of the retained M1mn were failed to erupt and recommended for extraction. Conclusions: Treatment prognosis was favorable on Group 1 & 2 than Group 3. After removing an element of the cause in case of Group 1 & 2, orthodontic traction or periodic observation will be recommended.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.73-85
• /
• 1995

Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.