• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.179-180
• /
• 2015

운항하는 선박의 특성상 미래 상태를 반영한 예방정비는 선박의 안전한 운항과 운영비용 절감에 중요한 요인이다. 이에 본 논문에서는 선박 엔진의 세 가지 주요 베어링의 마모 상태를 모니터링하고 앞으로의 마모 정도를 예측하는 시스템을 개발하였다. 이 시스템은 현재의 실린더 하사점 레벨 데이터를 기반으로 앞으로의 실린더 하사점 레벨을 예측한다. 실험에 적용한 실린더 하사점 레벨 데이터는 테스트 지그를 제작하여 발생시켰고, 이 장치를 통해서 취득한 데이터를 이용하여 선박 엔진의 미래 상태를 예측하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.325-331
• /
• 2003

This paper described the characteristics of the exhaust pressure and proposed the assistant device for detection of misfired cylinder. Misfire, one of abnormal combustion, affects a bad influence of the 3-way catalyst and emits unburned hydrocarbon. Therefore, to prevent these unusual phenomena and eliminate the factor of the environmental pollution, early detection and correction of the misfired cylinder play a very important role. The configuration of assistant device was changed by length and diameter of pipe and analyzed with the install position on the exhaust system. Experimental results showed that the configuration of assistant device is not affected more than length and diameter of pipe and the assistant device is be effective in the detection of misfired cylinder on the gasoline engine.

• 기계와재료
• /
• v.25 no.3
• /
• pp.6-15
• /
• 2013

유압프레스의 단점을 극복하기 위해서 서보모트를 장착하여 성형속도를 높인 서보 유압프레스를 개발하게 되었으며, 특히나 서보모터를 국내산으로 적용하여 듀얼형으로 유압시스템의 효율성을 높여 최종적으로 개발함으로써 서보 유압프레스를 완전 국산화하였다. 또한 하사점 위치 제어의 용이성을 확보하기 위해 프레스 램용 메인 실린더에 톱니나사부를 만들어 임의의 위치에 정지할 수 있는 정지정도 및 하사점 위치 제어정밀도를 향상시켰으며, 유량의 미세 제어를 통해 프레스 램의 동작성을 개선코자 하였다. 다이쿠션은 메인 실린더와의 연계 제어를 통해 제품의 손상 방지 및 제품 추출의 용이성을 확보하였으며, 소재의 종류나 제품의 형상 특성에 따라 프리모션 제어가 가능한 지식기반형 자율제어 시스템을 적용하였다. 듀얼 서보시스템과 유압펌프가 연계구동함에 따라 기존 유압프레스 보다 약 40%이상의 에너지절감을 달성할 수 있을 것으로 예측되며, 현재 에코머신 인증제도에 대한 논의가 활발한 시점에서 매우 적합하고 필요한 하이브리드형 서보 유압프레스의 국산화 개발 사례라고 하겠다.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.46-50
• /
• 2016

Laminate products for motor core are developed with a structure in which the importance of quality level and clamping force is influenced by the recent performance and safety of the product. It has been confirmed that the accuracy of the mold is emphasized, and that the accuracy of the tightening force produced by the stacked product for the motor core is greatly influenced by the change in the bottom dead center displacement of the aged high speed press. The reason why setting the mold, and test the effect of bottom dead center of high speed press is to improve product pull force in embossing process at mold. We have applied the system to minimize the effect on the damping displacement under the dynamical degree of the equipment by applying the emboss complement device which can test the influence and complement in the process.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.33-36
• /
• 2013

운항하는 선박의 특성상 미래 상태를 반영한 예방정비는 선박의 안전한 운항과 운영비용 절감에 중요한 요인이다. 이에 본 논문에서는 선박 엔진의 세 가지 주요 베어링의 마모 상태를 모니터링하고 앞으로의 마모 정도를 예측하는 시스템을 설계하였다. 목표하는 시스템은 현재의 BDC(실린더 하사점) 레벨 데이터 뿐만 아니라 취득한 BDC 레벨 데이터를 시계열 모형으로 예측한 미래값도 보여줄 수 있어야 한다. 이를 위하여 BWM(베어링 마모도 모니터링)의 프로토타입을 제작하고 이 장치로부터 BDC 레벨 데이터를 취득하였다. 이 과정에서 예측한 BDC 레벨과 실측 데이터를 비교해서 시계열 모형을 이용한 마모도 예측 방법이 적용 가능함을 확인하였다.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.29-33
• /
• 2016

Production machines have been more important, due to quality level of vehicle motor core is getting higher. That is why, to improve assembly fit of tooling and to be emphasized how much moving down caused of deterioration of high speed press, it is also getting more important parts as solution of problems. To analyze how much move based on condition of movement as tooling and high speed press, and to measure how much impact to embossing height caused of changing movement down. As the result of investigation, in case of material thickness 0.5mm, there is highest pull and force power when emboss height is 0.45mm. If emboss height is less than 0.45mm, pull and force power is getting lower, if emboss height is higher than 0.45mm, it is impossible to make it forming caused of changed press movement, also it has been piercing.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.40-45
• /
• 2022

The EV electric vehicle market is growing rapidly worldwide. An electric vehicle means a vehicle that uses energy charged through an electricity source as power. The precision of the press is important to mass-produce the drive motor, which is a key component of the electric vehicle. The size of the driving motor is increasing, and The size of the mold is also growing. In this study, the precision of large high-speed presses for mass production of driving motors was measured. A study was conducted on the measurement method of press and the analysis of measurement data. A drive motor is a component that transmits power by converting electrical energy into kinetic energy. EV driven motors have key material properties to improve efficiency. The material properties are the thickness of the material. As a method for improving performance, use a 0.2mm thin steel sheet. Mold is also becoming larger. As the mold grows, the size of the high-speed press for mass production of the driving motor is also increasing. Also, the precision of the press is the most important because it uses a thin iron plate material. So the importance of large press precision is being emphasized. In this study, the effect of large high-speed press structure on precision was verified

• Journal of the Korean Society of Food Culture
• /
• v.3 no.1
• /
• pp.7-16
• /
• 1988

An epigraph is an inscription mainly on a metal or stone monument, but some cases on bones or tortoise carapaces, ceramics, and coins. The '茶' inscriptions in 251 epigraphs in Korea are on 16 monuments, one tile, and one ceramic. By kingdom 5 belongs to shilla and 13 to Korea. The first '茶' inscription in on the Changsung-Tap of Borimsa Temple in Changhung-Kun, Chullanam-Do, which was established in 884 A.D. Religiously most of them are related to Buddism. Tea was most valued among valuables like gold, perlume, beads, etc. and so bestowed by kings. The study of epigraphs shows that our tea culture had most prospered diring the Kingdoms of Shilla and Korea.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.1027-1033
• /
• 2016

The purpose of this study is to examine the satisfaction level for military food services as well as to find out influential factors which affect satisfaction. The questionnaire survey was conducted by 111 soldiers. In the satisfaction analysis for military food services, 69.3% of soldiers presented positive response. There are, however, some differences in satisfaction between corporal and private groups as well as corporal and sergeant groups. Overall, the corporal group shows low satisfaction for military food services. To identify influential factors for satisfaction of military food services, we considered various factors: tasty, nutrition, quantity, hygienic conditions, environment, ambient factors, waiting time, presence of desert, menu, and kindness of a cook. Satisfaction analysis shows that main significant factors are tasty and quantity of the food. Thus, tasty and quantity of the food are need to be consistently monitored and improved to increase the satisfaction of military food services.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.192-209
• /
• 2014

The important national cultural heritages were retrieved. April 25 2014, US President Barack Obama formally returned 9 Seals of Joseon Dynasty and Korean Empire in Korea-US Summit taken place in Cheong Wa Dae. These Seals were taken out of Deoksugung illegally by a US Marine Corps officer during Korean War, handed down to his posterity, and last November 2013 confiscated by HSI in San Diego. Through investigations above facts turned out and it was decided to return these relics to Koera. In the process of surveying these seals, I confimed the authenticity of them and transferred my opinion to Cultural Heritage Administration. In this paper, I try to summarize the historical value of each Seals and suggest the remaining task.