Journal of the Korea Institute of Information Security & Cryptology
/
v.11
no.3
/
pp.23-32
/
2001
Since the LILI-128 cipher is a clock-controlled keystream generator, the speed of the keystream data is degraded in a clock-synchronized hardware logic design. Basically, the clock-controlled $LFSR_d$ in the LILI-128 cipher requires a system clock that is 1 ~4 times higher. Therefore, if the same clock is selected, the system throughput of the data rate will be lowered. Accordingly, this paper proposes a 4-bit parallel $LFSR_d$, where each register bit includes four variable data routines for feed feedback of shifting within the $LFSR_d$ . Furthermore, the timing of the propose design is simulated using a $Max^+$plus II from the ALTERA Co., the logic circuit is implemented for an FPGA device (EPF10K20RC240-3), and the throughput stability is analyzed up to a late of 50 Mbps with a 50MHz system clock. (That is higher than the 73 late at 45 Mbps, plus the maximum delay routine in the proposed design was below 20ns.) Finally, we translate/simulate our FPGA/VHDL design to the Lucent ASIC device( LV160C, 0.13 $\mu\textrm{m}$ CMOS & 1.5v technology), and it could achieve a throughput of about 500 Mbps with a 0.13$\mu\textrm{m}$ semiconductor for the maximum path delay below 1.8ns.
Journal of the Korea Institute of Information Security & Cryptology
/
v.16
no.4
/
pp.33-41
/
2006
RSA cryptosystem is of great use in systems such as IC card, mobile system, WPKI, electronic cash, SET, SSL and so on. RSA is performed through modular exponentiation. It is well known that the Montgomery multiplier is efficient in general. The critical path delay of the Montgomery multiplier depends on an addition of three operands, the problem that is taken over carry-propagation makes big influence at an efficiency of Montgomery Multiplier. Recently, the use of the Carry Save Adder(CSA) which has no carry propagation has worked McIvor et al. proposed a couple of Montgomery multiplication for an ideal exponentiation, the one and the other are made of 3 steps and 2 steps of CSA respectively. The latter one is more efficient than the first one in terms of the time complexity. In this paper, for faster operation than the latter one we use binary signed-digit(SD) number system which has no carry-propagation. We propose a new redundant binary adder(RBA) that performs the addition between two binary SD numbers and apply to Montgomery multiplier. Instead of the binary SD addition rule using in existing RBAs, we propose a new addition rule. And, we construct and simulate to the proposed adder using gates provided from SAMSUNG STD130 $0.18{\mu}m$ 1.8V CMOS Standard Cell Library. The result is faster by a minimum 12.46% in terms of the time complexity than McIvor's 2 method and existing RBAs.
The Journal of Korea Institute of Information, Electronics, and Communication Technology
/
v.15
no.1
/
pp.56-61
/
2022
In this paper, we classify and present AI algorithms and natural language processing methods used in chatbots. A framework that can be used to implement a chatbot is also described. A chatbot is a system with a structure that interprets the input string by constructing the user interface in a conversational manner and selects an appropriate answer to the input string from the learned data and outputs it. However, training is required to generate an appropriate set of answers to a question and hardware with considerable computational power is required. Therefore, there is a limit to the practice of not only developing companies but also students learning AI development. Currently, chatbots are replacing the existing traditional tasks, and a practice course to understand and implement the system is required. RNN and Char-CNN are used to increase the accuracy of answering questions by learning unstructured data by applying technologies such as deep learning beyond the level of responding only to standardized data. In order to implement a chatbot, it is necessary to understand such a theory. In addition, the students presented examples of implementation of the entire system by utilizing the methods that can be used for coding education and the platform where existing developers and students can implement chatbots.
Journal of the Korean Society of Marine Environment & Safety
/
v.29
no.4
/
pp.332-337
/
2023
Korea is not only surrounded by the sea on three sides, but also has national and local rivers extending 26,843 km, so it has a geographical feature in which abundant sea and inland water surface coexist. As the number of ships operating in the inland waters is continuously increasing due to the improvement of national income, the risk of ship accidents and human casualties in the inland waters is also increasing. In this study, a macroscopic plan for the safety management of inland water ships was presented through investigation of inland water related laws and operation status analysis. As an improvement plan, as a hardware infrastructure it is proposed to secure sufficient inland water fire-boats to secure the golden time for early response to accidents and lifesaving, and to operate an institution specializing in the prevention of inland water ships accidents. And as a software infrastructure, establish departure control standards for inland water ships and the safety diagnosis system currently applied only to sea going ships, the introduction of a system tailored to the characteristics of inland water ships. The proposed inland water safety management policy is expected to contribute to the preparation of prompt and systematic countermeasures in the event of an inland water ship accident, and it is hoped that it will serve as an opportunity to continue to pay attention to safety-related research on inland water ships, which was briefly activated after the sinking of M/V Sewol.
Yong-hak Song;Hyun Kim;Deuk-Jae Cho;Jong-Hwa Beak;Do-yeon Kim
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2023.05a
/
pp.202-203
/
2023
The Ministry of Oceans and Fisheries is providing maritime safety services through the operation of the Korean e-Navigation service, and research is continuously needed to improve reliability and quality to secure the competitiveness of the system. In order to secure such competitiveness, we presented the basic design for the big-data maritime information gateway system for minimizes thereal-time operation impact of the Korean e-Navigation service, and a theoretical hardware structure diagram including pseudonymization procedures to implement the overall system and solve privacy security issues. However, the proposed structure diagram and design include only the overall concept, to link real-time maritime information, required detailed privacy security method to satisfy the Privacy Act of the Republic of Korea. To solve this problem, this study will identify factors to violate the Privacy Act within the real-time maritime information(privacy of shipowner, shipping company, captain, navigator, fisherman, etc.) linked by the big-data maritime information gateway system, and research the method to link the secured information to other institutions by encrypting identified the factors.
The Journal of the Convergence on Culture Technology
/
v.9
no.6
/
pp.967-971
/
2023
Recently, a variety of AI-based platform services are available, and one of them is ChatGPT that processes a large quantity of data in the natural language and generates an answer after self-learning. ChatGPT can perform various tasks including software programming in the IT sector. Particularly, it may help generate a simple program and correct errors using C Language, which is a major programming language. Accordingly, it is expected that ChatGPT is capable of effectively using Verilog HDL, which is a hardware language created in C Language. Verilog HDL synthesis, however, is to generate imperative sentences in a logical circuit form and thus it needs to be verified whether the products are executed properly. In this paper, we aim to select small-scale logical circuits for ease of experimentation and to verify the results of circuits generated by ChatGPT and human-designed circuits. As to experimental environments, Xilinx ISE 14.7 was used for module modeling, and the xc3s1000 FPGA chip was used for module embodiment. Comparative analysis was performed on the use area and processing time of FPGA to compare the performance of ChatGPT products and Verilog HDL products.
The purpose of this study is to contribute to enhancing spiritual combat power as the core of intangible combat power in Korean armed forces through analyses and suggestions on Admiral Yi Sun-sin's leadership for four major sweeping victories based upon jointness which effectively integrates tangible and intangible combat power in armed forces to maximize the synergy of fighting power. As our armed forces has improved their military structure in the dimension of hardwares so as to enhance their efficiency, according to the results of analyzing the process to promote the jointness between our armed forces and our allied powers in the dimension of softwares supporting such hardware dimensions, it was necessary to innovate the system for reinforcing future-oriented spiritual combat power as well as all the tasks related to leadership as the core of intangible combat power jointly and harmoniously. In order to derive tasks about the leadership of Korean armed forces in the dimension of softwares which should be combined with military structural reform for strengthening spiritual combat power for national defense, this study selected research questions linked with jointness. That is, (1) what is the core of military leadership in Western advanced countries in the age of jointness? (2) What are the contemporary illuminations or implications of Korean leaderships through Admiral Yi Sun-sin's war history? Then, this study analyzed literature reviews, this author's field interviews in the time of war participation, and leadership war history focusing on Admiral Yi Sun-sin's leadership for four major sweeping victories. According to the results of these analyses, this study extracted (1) the strategic leadership to predict and prepare the future, (2) the leadership of integration to create synergy effects, and (3) the leadership of knowledge to be practiced focusing on combats. In addition, in order to reinforce spiritual combat power based upon jointness, (1) it is necessary to precede in-depth and substantial leadership diagnosis for enhancing jointness. (2) It is necessary to embody national defense reform as well as integration for jointness improvement after scientifically comparing and analyzing the differentiation and integration between the Ministry of National Defense, army-navy-air force leadership centers, and PKO centers. (3) It is necessary to promote the merger and abolition between institutions related to intangibale combat power under the Ministry of National Defense.
This study was to examine perceptions of information technology(IT) competencies among gifted and non-gifted students(i.e., information science high school students and technical high school students). Of the 370 high school students surveyed from 3 high schools(i.e., gifted academy, information science high school, and technical high school) in three metropolitan cities, Korea, 351 students completed and returned the questionnaires yielding a total response rate of 94.86%. High school students recognized the IT professional competence as being most important when recruiting IT employees. And they considered that practice-oriented education was the most importantly needed to improve their IT skills. In addition, the most important sub-factors of IT core competencies among gifted academy students and information science high school students were basic software skills. Also Technical high school students responded that the main network and security capabilities were the most importantly needed to do so. Finally, the most appropriate training courses for enhancing IT competencies were recognized differently among gifted and non-gifted students. Gifted academy students responded that the 'algorithm' was the mostly needed for enhancing IT competencies, whereas information science high school students responded that 'data structures' and 'computer architecture' were mostly needed to do. For technical high school students, they responded that a 'programming language' course was the most needed to do so. Results are discussed in relations to IT corporate and school settings.
This study has analyzed the history of the subcontract animation in Korea that began with Golden Bat of TBC Animation Division in 1966 to 1980s and shed the light on the history of subcontract animation that has been processed over 30 years in Korean animation. For this purpose, through the outlined status of subcontract animation, such as, production company, production status, scale of industry and so forth, the status of the OEM industry then has been checked and it links the solidified background of animation into subcontract production industry with the situation in time for analysis. In addition, on the basis of the foregoing, it is intended to broaden the horizon of the history of animation through the analysis on new search for facilitating the creative animation by overcoming the issues and limits generated by the subcontract animation industry. 1970s was the time that the national objective is to advance heavy-chemical industry and export-led economic growth. From the late 1970s, the animation has been spot lighted as the main-stream export industry through the overseas subcontract orders for animation. Expansion of the subcontract animation production has been influenced from the national policies on public culture, dispersion of color TV, facilitation of video production market and other media changes of the time that led the decline of animation audiences in theaters, and another cause would be in lack of platform of broadcasting companies that avoided the independent animation production for its economic theory. The subcontract animation industry may have the positive evaluation in the aspect of expanding the animation environment, such as, structuring of animation infra, development of new human resources and etc. However, the technology-incentive 'production'-oriented advancement has created distorted structure in advancing the professional human resources due to the absence of 'pre-production' of planning and others as well as the insufficient perception on 'post production (post work)', and it was unable to formulate domestic market by re-investing the capital accumulated for OEM industry into the production of creative animation and it has been assessed as negative aspect. Animation is a cultural and spiritual product of a country. Therefore, the systematic support policy for the facilitation of the creative animation, such as, development of professional human resources, creation of outstanding work, formation of market to make the pre-circulation structure and so forth has to be sought. However, animation is an industry, but there is no perception that it is a cultural industry based on the creativeness, not hardware-oriented manufacturing business. Such a lack of recognition, there was no policies to make the market and facilitate the creative animation by the animation of Korea for this period through the long-term plan and investment for independent work production. Such an attempt is newly begun through diverse searches for protection and advancement of creative animation in Korea after 1990s.
Kim, Young Woo;Kim, Hong-Yeon;Bae, Seungjo;Kim, Hag-Young;Woo, Young-Choon;Park, Soo-Jun;Choi, Wan
KIPS Transactions on Software and Data Engineering
/
v.2
no.2
/
pp.81-90
/
2013
During the past decade, many changes and attempts have been tried and are continued developing new technologies in the computing area. The brick wall in computing area, especially power wall, changes computing paradigm from computing hardwares including processor and system architecture to programming environment and application usage. The high performance computing (HPC) area, especially, has been experienced catastrophic changes, and it is now considered as a key to the national competitiveness. In the late 2000's, many leading countries rushed to develop Exascale supercomputing systems, and as a results tens of PetaFLOPS system are prevalent now. In Korea, ICT is well developed and Korea is considered as a one of leading countries in the world, but not for supercomputing area. In this paper, we describe architecture design of MAHA supercomputing system which is aimed to develop 300 TeraFLOPS system for bio-informatics applications like human genome analysis and protein-protein docking. MAHA supercomputing system is consists of four major parts - computing hardware, file system, system software and bio-applications. MAHA supercomputing system is designed to utilize heterogeneous computing accelerators (co-processors like GPGPUs and MICs) to get more performance/$, performance/area, and performance/power. To provide high speed data movement and large capacity, MAHA file system is designed to have asymmetric cluster architecture, and consists of metadata server, data server, and client file system on top of SSD and MAID storage servers. MAHA system softwares are designed to provide user-friendliness and easy-to-use based on integrated system management component - like Bio Workflow management, Integrated Cluster management and Heterogeneous Resource management. MAHA supercomputing system was first installed in Dec., 2011. The theoretical performance of MAHA system was 50 TeraFLOPS and measured performance of 30.3 TeraFLOPS with 32 computing nodes. MAHA system will be upgraded to have 100 TeraFLOPS performance at Jan., 2013.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.