• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.507-512
• /
• 2022

The subjects of the study are the sedimentary rock slope of the Mesozoic Gyeongsang Supergroup, which has a high risk of failure. The rocks of the slope shall be sandstone, siltstone and dacite, and discontinuities shall develop beddings, shear joints, extension joints, and dacite dyke boundary planes. The type and scale of failure varies depending on the type of rock and the strike/dip of the discontinuities, but the planar failure prevails. Based on the face-mapping data, SMR, physical and mechanical testing of rocks, the critical equilibrium analysis, all representative sections required a countermeasure method because the acceptable safety factor during dry and rainy seasons were far below Fs=1.5 and Fs=1.2. After applying the countermeasure method, both the dry and wet conditions of the slope exceeded the allowable safety factor. In particular, the face-mapping data of the slope-face, the geological cross-sections of several representative sections perpendicular to the slope-face, and the critical equilibrium analysis and the presentation of countermeasure methods that have been reviewed based on them are expected to be reasonable tools for the slope stability.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.579-588
• /
• 2021

Reinforced earth retaining walls have been widely used in recent years, as they are superior from the landscape perspective than normal concrete retaining walls. However, as reinforced earth retaining walls are made of various materials depending on site, existing design methods cannot secure stability, and a variety of problems have occurred. Studies on the design and stability analysis methods, which are different from existing methods, have been conducted to address these problems. This study conducted a stability investigation using numerical analysis, and blocks of reinforced earth retaining walls were individually applied, which is different from pre-existing numerical analyses. To verify the input values of the numerical analysis when applying individual blocks, real-scale experiments of the friction characteristics between the blocks and the connection properties between the blocks and stiffener were conducted. The applicability of the block conditions, which were the same as those of real sites, was verified through numerical analysis, and will be used for the stability review and design of various combinations of blocks and stiffeners.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.6
• /
• pp.607-612
• /
• 2009

Sundubu, Pork-Bulgogi, Kimchi-pork, Pork rib, Samgyetang, Stir-fried squid, Stir-fried chicken, Braised potato, Braised tofu and Jabchae were selected as takeout-style Korean food items. Sensory evaluation using a 9-point hedonic scale was conducted with residents in Honolulu, Hawaii during a 2 month market test. Among the respondents in the sensory evaluation, Japanese and Americans constituted 32.8% and 25.3%, respectively, of total respondents, which reflect the residential races in the state of Hawaii. The sensory scores of each attribute were judged as follows : aroma 7.2~8.2, color 7.0~8.2, flavor 7.2~8.2, overall preference; pork rib 8.2, pork Bulgogi=braised potato 8.1, stir-fried chicken 8.0, kimchi pork 7.9, Sundubu 7.6, Jabchae and braised tofu 7.5, stir-fried squid 7.2, Samgyetang 7.0. In a satisfaction survey using a 5 point scale after a 2 month market test, the scores of each satisfaction attribute such as quality, price, convenience, difference, etc. were shown to range from 4.1-4.6, indicating that 10 take out-style Korean food items were very popular with Hawaiian consumers. These results suggest that Korean food items are competitive with other ethnic foods in the Hawaii market.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.223-242
• /
• 2024

Single-shell tunnels, introduced to South Korea in the early 2000s, have not been adopted for the main tunnels of roads or railways over the past two decades despite several attempts starting with the Gwangju City Bypass. This reluctance likely arises from concerns about the long-term performance of supporting materials and the absence of relevant criteria and specifications. However, recent progress, including the incorporation of high-strength shotcrete standards and corrosion-resistant rock bolt specifications, alongside equipment and technique enhancements, necessitates a reassessment of single-shell tunnels. While the single-shell tunnel method offers advantages in environmental impact, construction cost and period compared to the conventional NATM, it is crucial to address the challenges, such as limited design and construction experience, incomplete detailed standards, and insufficient construction specifications, through further research and pilot projects. This paper reviewed the basic principles of single-shell tunnel, current application and research status, technical development trends, criteria and specifications, and remaining challenges. It aims to reignite discussions on the feasibility of applying single-shell tunnels in South Korea.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.135-140
• /
• 2024

It is said that PV power generation systems have a long lifespan compared to other renewable energy sources and require little maintenance. However, there are cases where the performance expected during initial design is not achieved due to shading, temperature rise, mismatch, contamination/deterioration of PV modules, failure of inverter, leakage current, and arc generation. Therefore, in order to solve the problems of these systems, the power generation amount and operation status are investigated qualitatively, or the performance is comparatively analyzed based on the performance ratio (PR), which is the performance index of the solar power generation system. However, because it includes large losses, it is difficult to accurately determine whether there are any abnormalities such as performance degradation, failure, or defects in the PV power generation system using only the performance coefficient. In this paper, we studied a status diagnosis algorithm for shading, inverter failure, leakage, and arcing of PV modules to optimize the power generation of PV power generation systems according to changes in the surrounding environment. In addition, using the studied algorithm, we examined the results of an empirical test on condition diagnosis for each area and the resulting optimized operation of power generation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.111-120
• /
• 1993

An attempt was made to investigate the yield response to the N P K fertilizer application for barley, soybean, corn, garlic, onion and potato in the famers' fields from 1971 to 1989. 1. The yield index of without-fertilizers plot when yield of N P K plot is regarded as 100, were 43~92 in plot without N, 71~94 in plot without $P_2O_5$ and 88~96 in plot without $K_2O$. The effects of each fertilizer application for upland crops were greater in barley, potato and corn for N, barley and soybean cultivated in reclaimed soil for $P_2O_5$ and potato and barley for $K_2O$. 2. The optimum levels of N, P and K fertilizers varied with the kinds of soil and crop in the ranges of 4.0~23.2kg/10a for N, 6.0~45.0kg/10a for $P_2O_5$ and 6.6~21.9kg/10a for $K_2O$. 3. The efficiencies of applied fertilizers were increased in cultivated soil in comparison with the reclaimed soil and the efficiencies were in order of potato, onion>barley, corn>soybean. 4. The regression equations of fertilizer recommendation for 5 crops excepting onion were obtained from relations between the organic matter in soil and the amount of N fertilizer applied, between the available $P_2O_5$ in soil and the amount of P fertilizer applied, and between the exchangeable K of soil and the amount of K fertilizer applied. 5. The reduced rates of P and K fertilizer application based on soil testing varied with regions in the ranges of 11.8~80.0 and 0~62.5%, respectively. And the recommendation for N fertilizer amount was necessary to increase or decrease depending on regions.

• Asian Journal of Turfgrass Science
• /
• v.22 no.1
• /
• pp.65-74
• /
• 2008

Traffic management is becoming an important issue in turfgrass practise on golf course. The objective of this study was to investigate the combined impact of different traffic times and types of fertilization. Traffic treatment was applied in morning (AM), noon, and afternoon (PM). Fertilizers used include faster-release fertilizer (21-17-17) and slow-release fertilizers (12-6-18, 11-3-22, 20-3-20, 10-3-10). Experiment was conducted from Oct. 1 to Nov. 30, 2005 on a nursery putting green of Incheon Grand Golf Club. The growth and quality of creeping bentgrass (Agrostis polustris cv. 'Seaside II') were evaluated on visual leaf color, leaf texture, shoot density, and root length. The measurement at 20 days after treatment, turfgrass color and leaf texture showed the best result on 10-15-10 + Noon-traffic plot. Turf quality and traffic tolerance were not different at Am and Pm traffic treatment. However, traffic stress in early morning and late evening caused the most severe damage to the turfgrass. Shoot density was the highest in 10-15-10 + Noon-traffic treatment but root length was not different among treatments after 30 day measurement. Among the fertilizers, slow release fertilizer resulted in higher turf quality and traffic tolerance than fast release fertilizer, however, shoot density did not showed a significantly different. For the fast recuperation of turfgrass from traffic injury in the early winter, it is recommended to avoid early morning and late evening traffic such as cup replacement and other maintenance practise. It is also recommended to delay the first tee-up time and ending early for last tee time during cold weather season.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.166-173
• /
• 1985

The multiple ear and tiller line (MET), which was selected from a local maize collection and has been selected for earliness by selfing for five generations, was compared its plant characteristics with four U.S. leading hybrids. 1. The general plant growth was a little retarded by poor soil fertility and structure. 2. The fresh weight of the MET line was about 97.8% of the U.S. check varieties. 3. The dry weight of the MET line was also about 94.5% of the check U.S. hybrids (1,695 kg / 10a.). 4. The tillering and eating habits of the MET line had contributed toward increasing fresh and dry weight of the MET line. 5. The average plant height of the MET line was much less than those of the check varieties, due to the selfing depression manifested by the MET line, (234.7cm. of the MET vs 250.7cm. of the check) 6. Apparent differences of disease resistance was observed among varieties studied. The degree of plants infected with the black stripe mosaic virus was over 20% for the check U.S. hybrids, while less than 5% of the MET line was infected with the disease. 7. The grain yield per 10 a of the MET line was far below the check hybrids due to the inbreeding depression of the MET line. However, the kernel number per unit area of the MET line with small size kernel was much greater than that of the check hybrids. The 100 kernel weight of the MET line was around 10 grams. 8. The average fresh and dry matter weight of the three ($sorghum{\times}sudan$ grass) varieties was very much alike with those of the MET line. 9. In conclusion, the use of the MET line for silage production may have dual adventages because of its low seed price and of its small size kernels, which may reduce the amount of seeds required for planting in an unit area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.39-48
• /
• 1977

The results of the determination of the optimum level of nitrogen fertilizer experiment for rice paddy at 21 locations over the country in 1975 year are as follows. 1. The yields of control and N-fertilized plots of ordinary variety (Japonica type) were normal paddy soil>sandy paddy soil>poorly drained paddy soil. Control plots of Tongil variety, (Indica type) however, were sandy poorly drained soil>sandy normal paddy soil=clay poorly drained soil, and N-fertilized plots were normal paddy soil>sandy poorly drained soil>sandy soil>clay poorly drained soil. In other words Tongil variety has higher adaptability to sandy soil under no nitrogen. 2. The yield response to N-fertilizer was higher in normal paddy soil than sandy soil. The productivity per 1kg of nitrogen was 16.6kg in normal paddy soil, 10.5 in sandy soil, and 8.6-11.4 in poorly drained soil for Tongil variety. For ordinary variety, they were 12.6, 6.3, 6.6-9.3kg respectively. 3. Ripening ratio for ordinary variety and ripening ratio and grain weight for Togil variety were higher in sandy soil than normal paddy soil. The main reason why the N-response in mormal paddy soil is higher was appeared to be higher number of effective tillers in normal paddy soil. 4. The optimum rates of N-fertilizer in average were 19.4 in normal paddy soil, 14.6 in sandy soil, and 11.6-13.4kg/10a in poorly drained soil for Tongil variety. For ordinary variety they were 15.9, 10.2, and 8.7-12.7kg/10a respectively. 5. The optimum rate of nitrogen was increased with the increase of productivity in normal paddy soils. In sandy soils and poorly drained soils it was not proved. 6. The optimum rates of N-fertilizer calculated from field experiment were somewhat different from the optimum rates calculated from $SiO_2/OM$ ratio. However, the values calculated both ways showed high correlation. It would be recommendable, therefore, to use $SiO_2/OM$ ratio to calculate the optimum rates of N-fertilizer after revising this equation considering different rice varieties and soil types or water management and climate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.153-170
• /
• 1977

Considering the ways for the possible improvement of soil test for upland crops, various methods for the evaluation of K supplying power and testing of available soil K were reviewed in terms of theoretical principles and practical usefulness of the each method. The review was also made on the characteristics of upland crops in K requirement and on the chemical properties of major korean upland and lowland rice soils in terms of K availability. Following is the few remarks drawn from the review. 1. Quite large number of methods have been known for the evaluation of K supplying power and testing for available soil K. In nature, they can be divided into two categories; capacity-based methods and intensity-based methcds. The capacity-based methods usually measure the exchangeable and some portion of nonexchangeable K, while the intensity-based methods suggest to consider the ractivity ratios of major cations in soil solution and the energy requirement for the replacement of exchangeable soil K into soil solution. 2. As methodology for extraction of interested part of soil K, chemical extraction, electrodialysis and ion exchange methods have been known. Among these, chemical extract ion is favorable because of its simplicity. However, recently suggested Electro-Ultra-Filtration method seems to merit further study for wider use for not only K but also other nutrient availability of soils. 3. The intensity-based methods, although they are more theoretical, because of their complexity, in methods may not be adapted for practical soil tests. 4. The exchangeable K which is rather simple to measure and which well reflects the status of K reserve as nonexchangeable and is immediate pool of water soluble K may be good, if not best, criterion of soil K availability to plant in common soil testing. 5. Because there are evidences that the abundance of available K alone may not be good inclication for availability of K to plant, it is recommendable to interprete the exchangeable K data as percent saturation of exchangeable K to total C. E. C. of soil for the recommend ation of K fertilizer based on soil tests. 6. Some pot and field trial results showed the trends that percent potassium saturation to total C. E. C. better serve as the parameter for K fertilizer recommendation.