• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.341-344
• /
• 2015

본 논문에서는 소규모 공간을 규정하였다. 광의의 소규모 공간이란 바닥 면적이 $300m^2$ 미만으로서 소방관련법 상 소화설비 설치대상에서 제외되는 공간에 해당한다. 또한 협의의 개념으로 소방관련법 상 소화설비 설치대상에 해당하나 바닥 면적이 $300m^2$ 미만 중에 소화설비 설치가 제외되는 공간과 피트공간과 그 밖의 소방관련법 상 소화설비 설치대상에 포함되지 아니하는 주방을 의미한다. 소규모 공간이지만 사용 용도가 창고 등과 겸용으로 사용되어 화재하중을 예상하기 어려우며 소화설비가 요구되는 공간이다. 본 연구는 다양한 화재원인 중에 전기화재에 관한 것으로 전기설비의 안전성능 기준이 강화되고 제품의 질적 수준이 향상됨에 따라 발화요인별 화재 발생률이 다소 둔화되고 있으나 전기화재는 여전히 화재사고의 상당한 부분을 차지하고 있는 실정으로 소규모에서 발생할 수 있는 화재를 대상으로 하여 구획된 소공간유형의 EPS실에서 케이블 등의 가연성물질에 대한 화재위험성을 시뮬레이션 분석을 통하여 산정하였다.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.258-261
• /
• 2001

The paper industry produces about 6,000 ton of paper ashes yearly with by-products in Yuhan-Kimberly Ltd. The paper ashes was analyzed and evaluated for their potential as the soil acidity amendment materials. This study was conducted to investigate a reasonable amount of paper ashes for soil acidity amendment effect to be applied onto raising seedling of Calendula officinalis L. The mixed proportion of applied ashes, which was compared with agricultural lime, was treated to 0, 5, 10 and 15% (v/v) in mixed soil (pH 6.0) and the peat moss (pH 3.8) respectively. Consequently paper ashe was found to be more effective than agricultural lime at germination percentage, growth condition and in sharp initial increase of soil pH. The appropriate proportion of applied paper ash was 10% (v/v) at the soil-mix, and 15% (v/v) at the peat-moss. Soil application of paper ashes may provide supplemental quantities of K, Ca, Mg and other plant nutrients. But heavy metal concentrations in paper ash was low and should not limit application rates.

• Journal of the HCI Society of Korea
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2016

The landscape of the current fitness trackers is not only limited to the aerobic exercises but also the weight training is comparatively excluded. Recently, a few weight training fitness tracker was released, human-computer interaction was not well designed due to the lack of considering the context. Because body movement would be intense while doing exercises, having exercise performers hold or operate a device makes a negative experience. As the wearable device is always inseparable to body, it could provide effective feedback because holding or operating a device is not necessary. Therefore, this study aims to make the exercise performers feel a natural feedback through the wearable device to do effective exercises. As a result, this study identified three findings. First, the information which exercise performers most needed was 'during exercise.' and the most necessary information for exercise performers through wearable device's sensory feedback was about 'pace control' with counting and motivation. Second, the order of the most preferred presentation type of sensory feedback was auditory feedback, haptic feedback and visual feedback. Third, the satisfaction, utility, usefulness score of sensory feedback as same as the personal trainer's feedback. In conclusion, this study illustrated the feedback design implications using a wearable device while doing weight training and the possibilities that wearable device could be substitute for personal trainer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.116-122
• /
• 2006

This study was carried out to compare physical properties of the horticultural substrates measured by the European standard methods (CEN methods) and the Rural Development Administration of Korea methods (RDA methods). Sixty horticultural substrates including 40 marketed substrates and 10 organic and inorganic raw materials such as peat moss, coir dust, rice hull, perlite and zeolite were sampled. The samples were then analyzed for 6 physical properties by both CEN methods and RDA methods. The results of both methods were analyzed by linear regression. Bulk density ($R^2=0.8304$), particle density ($R^2=0.8136$) and porosity ($R^2=0.6374$) values measured by the two methods were highly significant. Whereas those for easily available water (EAW, $R^2=0.3327$), water volume ($R^2=0.2692$) and air volume ($R^2=0.0739$) were not significant. Further research is needed to facilitate the conversion between the two methods.

• Weed & Turfgrass Science
• /
• v.3 no.2
• /
• pp.143-149
• /
• 2014

This study was conducted to evaluate the effects of the mixture ratio of soil amendments blended with coco peat (Coco) and American soldier fly cast (SFC) on the physicochemical properties on the sand green. pH and EC of soil were significantly related to mixture ratio of SFC, Mix1, Mix2 and Mix3. Capillary porosity, air-capillary porosity and total porosity of root zone mixed SFC, Coco, Mix1, Mix2 and Mix3 were met to the USGA green specification. The mixture ratios of Mix1 and Mix2 in root zone were positively related capillary porosity and total porosity, and air-capillary porosity was negatively related capillary porosity and hydraulic conductivity. Capillary porosity of Mix1, Mix2 and Mix3 blended SFC and Coco was affected by SFC and Coco, and total porosity by Coco. These results showed that soil amendments blended SFC and Coco was developed capillary porosity and hydraulic conductivity on the USGA sand green than these of SFC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.344-351
• /
• 2002

Chemical speciation and transport of heavy metals in soil environment could be controlled by humic acid. In order to understand the mechanism on competitive adsorption of Cd and Cu on the surface of humic acid extracted from peat, the charge development of humic acid were investigate through a batch adsorption experiment with a series of different background electrolytes levels. The competitive adsorption of Cd and Cu to the humic acid were estimated according to the model using the proton binding constant obtained from the above batch test. The affinity of Cu to the carboxyl group on the humic acid was higher than that of Cd, but the affinity to the phenolic group was lower than to the carboxyl group. It seems that the amount of adsorbed Cd and Cu could be estimated using the proton binding constant obtained from a solution with single background ion. However, it is difficult to interpret the competitive adsorption of Cd and Cu with the constant for single background ion.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.2
• /
• pp.16-21
• /
• 2017

In this study, the flow effect of warming and cooling in the air supply of a pit for air conditioning were evaluated in BS art museum. We simulated the flow temperature for a pit winter and summer seasons using computational fluid dynamics. Consequential, energy saving, energy saving costs and initial payback periods were calculated and the following conclusions were drawn. The warming effect of the winter increased by $18.1^{\circ}C$ and $0.2^{\circ}C/m$ and the cooling effect of the summer decreased by $6.1^{\circ}C$ and dropped to $0.07^{\circ}C/m$. Energy saving appeared to be 19.1 kW in the summer and 54.3 kW in winter. Energy saving costs ranged from 2,567,119 won/year to 5,134,238 won/year and at minimum, initial payback period for initial investment was 3.9 years. As a result, the air supply system using an existing pit without any burden on initial investment costs is believed to contribute to energy saving through warming and cooling of unutilized energy effects.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2179-2181
• /
• 2004

Model-free Method들 중에 반복 피트백 조절 알고리즘(Iterative Feedback Tuning, IFT)는 특정한 성능지수를 정의하고, 이를 최소화하도록 제어기의 게인들을 조절하는 방법을 제시하였다. PID와 같은 고전적인 제어이론에 근거한 제어기 설계 과정과는 달리, IFT 알고리즘은 반복 실험을 통해 성능지수의 Gradient를 구하여 이로부터 필터 게인들 조정하는 방법을 채택하고 있다. 수학적 증명과 실험적 실증을 통하여 IFT의 수렴성과 유용성이 보여짐에도 불구하고 IFT 알고리즘의 한계점은 단일 성능지수의 사용이라는데 있다. 이를 개선하기 위해서는 단일 제어 목적을 위한 단일 성능지수의 사용이 아닌 복수의 제어 목적을 위한 복수의 성능지수의 사용이 필요하다. 본 논문에서는 두 개의 성능지수를 가지는 IFT를 이용해서 위상 여유가 크고, 대역폭이 넓은 제어기를 설계하기 위해서 제어기 게인을 자동 조절하는 알고리즘을 제안하고 ODD에서 사용되는 플랜트에 적용한 모의실험을 통하여 그 유용성을 보였다.

• The Korean Journal of Quaternary Research
• /
• v.4 no.1
• /
• pp.27-40
• /
• 1990

$^{14}C$ age dating by AMS (accelerator mass spectrometry) technique was performed on twenty five small sized fossil shells and one peat taken from the sixteen piston cores in the southern and southeastern Korean Sea. AMS technique is available to date only a few milligram of amorphous carbons compare than conventional dating technique. It is described in detail of sample pre-treatment and experimental, and applied to the reconstruction of the sea level changes since the late Pleistocene in the Korean Sea. Dated age ranges from 520$\pm$100 to older than 33,500 years. Sedimentary facies in the study area represents a different environmental set which is affected by sea level fluctuation since the late Pleistocene.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.529-536
• /
• 2005

Recently the building of ultra large container ship are discussed among ship building companies and ship operating company who have a tendency to pursue the advantage of large scale of economy. These tendency will be continued for the time being, if ship-building skill and economical efficiency are available. As the enlargement of container ship size becomes hot issues in ship-building markets, the needs for re-arrangement of accommodation house in large container ship are proposed carefully in some researches. This study examined economical efficiency of re-arrangement of accommodation house in ultra large container ship. The separation between accommodation and engine room is proposed through out drawing works in initial design stage and we examined the merits and demerits of the separation in the view of economical efficiency. The RFR(Required Freight Rate) is considered as the objective function to evaluate the re-designed vessel. The economical benefits are analyzed in the view of ship operator and shipyard respectively.