• 제목/요약/키워드: 피에이디

검색결과 5건 처리시간 0.019초

건축파사드 LED칼라의 감성평가모형 연구 (A Study on the Emotional Evaluation Model of LED Colors in Architectural Pacade)

  • 유용우
    • 한국실내디자인학회논문집
    • /
    • 제21권2호
    • /
    • pp.101-111
    • /
    • 2012
  • The purpose of this study is to draw emotional evaluation model related to LED lighting colors and suggest basic informations that enable planned directions of architectural pacade lighting to simulate beforehand in a laboratory. As experimental methods, extracted PAD emotional evaluation model and then directed a experimental model of 10 LED lighting colors, studied and analyzed survey questions. The results are as follows; First, in the case of P(Pleasure-Unpleasure), Red, Yellow, Green, Cyan, Magenta, White and Combination of $G{\leftrightarrow}B$ Colors are satisfying, vibrant and positive distribution chart has shown. Second, in the case of A(Arousal-Unarousal), Red, Yellow, Green, Cyan, Blue, White and Combinations of $R{\leftrightarrow}G$, $G{\leftrightarrow}B$, $R{\leftrightarrow}B$ Colors, it makes a little difference, they have shown useful distribution chart to induce sight in a aroused state. Third, in the case of D(Dominance-Submissiveness), Red, Cyan, Green and Combinations of $G{\leftrightarrow}B$ Colors are free, controlling and extent of effect was excellent. On the contrary, in the case of Yellow and Magenta and Combinations of $R{\leftrightarrow}B$, they are gentle and arouse the protective instinct or feminine distribution chart has shown. Fourth, it showed difference of preference that difference of select ratios of both men and women in Orange, Blue, Greenish-Yellow (preference of man) and Magenta, Combinations of $R{\leftrightarrow}B$ Colors(preference of woman).

  • PDF

PSCAD/EMTDC를 이용한 태양광발전(PV) 모델링에 관한 연구 (The PV System Modeling Based on the PSCAD/EMTDC)

  • 전진택;노대석;김찬혁;왕용필
    • 한국융합학회논문지
    • /
    • 제2권3호
    • /
    • pp.15-23
    • /
    • 2011
  • 본 논문에서는 태양광발전의 3상 인버터의 동작특성을 해석하기 위하여, d-q좌표변환을 통하여 상태방정식을 유도하고, 출력제어를 위한 PI제어기를 갖은 전류제어 알고리즘과 인버터 설계에 대한 Sinusoidal PWM방식의 이론적 알고리즘 제시하였다. 이를 바탕으로 배전계통의 상용소프트웨어인 PSCAD/EMTDC를 이용하여 태양광발전의 모델링을 수행하였다. 그리고 시뮬레이션 결과와 이론적인 수치해석과의 비교, 분석을 통하여 본 연구에서 제시한 모델링의 유효성을 확인하였다.

저사이클 피로 영역에서의 Alloy 617 모재와 용접재의 파괴 시험편에 대한 거시적 및 미시적 관찰 (Macro and Microscopic Investigation on Fracture Specimen of Alloy 617 Base Metal and Weldment in Low Cycle Fatigue Regime)

  • 김선진;랜도 디와;김우곤;김응선
    • 대한기계학회논문집A
    • /
    • 제40권6호
    • /
    • pp.565-571
    • /
    • 2016
  • 본 논문은 Alloy 617 모재와 용접재에 대한 저사이클 피로 시험 후의 파괴 시험편에 대한 거시적 및 미시적 파면해석을 나타낸다. 용접재 시험편은 Alloy 617의 가스텅그스텐아크 용접 패드로부터 채취, 제작하였다. 본 연구의 목적은 Alloy 617의 모재와 용접재 시험편의 저사이클 파괴 모드 및 기구의 거시적 및 미시적 양상을 고찰하는 것이다. 전변형률 제어 피로시험이 상온에서 0.6, 0.9, 1.2 및 1.5%에 대하여 수행되었다. Alloy 617 모재의 거시적 파면은 피로하중 축에 수직인 평평한 형태의 양상을 보였으나, 용접재 시험편의 경우는 상대적으로 전단/별모양의 양상의 파괴를 나타내었다. 두 시험편 모두 피로균열전파 영역에서는 명확한 스트라이에이션이 관찰되었다. 한편, 모재의 피로균열은 피로 하중 축에 수직인 방향으로 결정입내를 따라 전파하였으나, 용접재 시험편의 경우 하중 축에 거의 $45^{\circ}$의 경사진 형태의 결정입내로 나타났다.

하드웨어 소프트웨어 Co-Design을 통한 MP3 부호화 칩 설계 (MP3 Encoder Chip Design Based on HW/SW Co-Design)

  • 박종인;박주성;김태훈
    • 한국음향학회지
    • /
    • 제25권2호
    • /
    • pp.61-71
    • /
    • 2006
  • MP3 부호화 칩을 하드웨어와 소프트웨어 Co-design 개념을 이용하여 설계하고 칩으로 제작하였다. 소프트웨어적인 측면에서 MP3 부호화과정에서 계산량이 가장 많은 distortion control loop를 scale factor pre-calculation을 통하여 계산량을 $67\%$까지 줄였다. 하드웨어적인 측면에서 고속연산이 가능한 32비트 부동소수점 DSP 코어와 Fn (Fast Fourier Transform) 블록의 하드웨어 구현을 통하여 계산량을 줄였다. 설계된 칩을 하드웨어 에뮬레이션을 통하여 검증한 후 0.25um CMOS 공정을 이용하여 제작하였다. 제작된 칩의 크기는 $6.2{\time}6.2mm^2$이었으며, 제작된 칩은 테스트 보드상에서 정성적 정량적인 측면에서 정상적으로 동작하는 것을 확인하였다.