• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1998

Ti-45at%AI-1.6at%Mn 조성을 갖는 금속간화합물의 장시간 및 반복산화 거동을조사하기 위하여 반응소결법 및 플라즈마 아크 용해법으로 제조한 시편에 대하여 80$0^{\circ}C$에서는 반응소결재와 용제재 모두 등온 및 반복산화에 대하여 우수한 저항성을 나타내었다. 90$0^{\circ}C$에서는 반응소결재의 경우에는 등온 및 반복산화에 대하여 우수한 저항성을 보였으며, 중량변화와 산화피막의 박리는 극히 적었다. 이에 비해 용제재의 경우에는 등온 및 반복산화에 의해 중향이 크게 변하였으며 피막의 박리도 극심하였다. 90$0^{\circ}C$에 있어서 두 재료간의 이러한 산화거동 차이는 기지/산화물 계면 부근에 형성된 산화층의 차이에 기인하는 것으로 간주하였다. 반응소결재의 경우에는 계면 부근에 연속적인 AO$_{3}$O$_{3}$층이 형성되며, 이러한 층이 산화에 대한 보호막으로 작용하는데 비하여 용제재에 있어서는 계면 부근에 AO$_{3}$O$_{3}$와 TiO$_{2}$의 혼합층이 형성되었다. 용제재의 반복산화시에 보여진 피막의 박리는 냉각시에 TiO$_{2}$와 기지간의 열팽창계수 차이에 기인하여 발생하는 열응력을 TiO$_{2}$가 견디지 못하고 박리를 초래한 것으로 해석하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.33-39
• /
• 2010

A self-organized nano-structured, photocatalytic $TiO_2$ membrane with large surface area of anatase crystallites was successfully fabricated by anodization. The nano-structured anodized $TiO_2$ membrane was characterized using EDX, SEM and XRD techniques and the effect of electrolyte type and concentration to fabricate $TiO_2$ metal membrane was also investigated. Regular nano tubular arrays were obtained By the EDX, SEM and XRD patterns, the anodized $TiO_2$ membrane showed the enhanced photocatalytic properties of anatase phase. Photocatalytic activities of fabricated $TiO_2$ metal membrane was also experimentally investigated as model compound of humic acid.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.848-851
• /
• 1999

In order to increase the stability of Ginkgo Biloba extract, we investigated the effect of three different fill formulations(SBO, PEG400, and PEG600 fill types) on the stability of Ginkgo Biloba extract in three different shell formulations (ssmb, smb and gmb shell types). The stabilities of each types were evaluated by testing their disintegration time sunder the condition of $40^{\circ}C$, 75% relative humidity(RH) for 8 weeks. The formulation of Ginkgo Biloba extract with ssmb and PEG600 formulation type showed the best stability among them.

• Composites Research
• /
• v.13 no.4
• /
• pp.75-82
• /
• 2000

A small diameter steel-ball impact experiment was performed to study the impact resistance of the surface of glass plates bonded with glass fabric/epoxy lamina. Five kinds of materials were used in this study: soda-lime glass plates, glass/epoxy lamina(one layer)-bonded and unbonded glass plates, glass/epoxy lamina(three layers)-bonded and unbonded glass plates. The range of impact velocity was 40 120m/s. The maximum stress and absorbed fracture energy were measured on the back surface of glass plates. With increasing impact velocity, various types of surface cracks such as ring, cone, radial and lateral cracks took place in the interior near the impacted site of glass plates. The cracks drastically decreased with glass/epoxy lamina coating. The surface fracture behavior could be evaluated using the maximum stress and the absorbed fracture energy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1307-1312
• /
• 2013

In this paper, alkaline or acidic solution, in particular the principle of electrolysis to oxidize the metal surface to form a device isolation film is developed. In the past, mainly in the form of pulse voltage is applied to the anode only a unipolar method, but in this paper by using the H-bridge to the amount of the positive (+) voltage and the negative supply voltage, alternating voltage polarity devices were fabricated according to the characteristics of metal specimens with different electrical conditions to form an oxide film on the device was developed. Supply current variable was used for the PWM modulation, (+) and (-) polarity change of the H-bridge bipolar pulse voltage to supply the was that. As a result, a more uniform pores with unipolar film was formed.

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.542-548
• /
• 1996

Electrodes modified with threonine, methionine and serine as ligands, which are incorporated by ion exchange into a polycationic film of electropolymerized $[Ru(v-bpy)_3]^{2+}$, have been employed in the determination of mercury in solution. The redox response of the surface-immobilized mercury/ligand complex was used as the analytical signal. When the polymeric film was electropolymerized, the supporting electrolytes were TBAP and $KPF_6$ to compare the morphology and anodic stripping of resulted polymer electrodes. At the case of the latter, the film had high porosity to give an easy incorporation of dopant anions into polymeric film matrix and a high sensitivity in determination of mercury ion. Especially, this polymer modified electrode exhibited possibility of multiple use in mercury determination over ten times. In all cases, calibration curves which were plotted by log of the surface coverage-normalized redox response vs. log[Hg] exhibited an excellent correlation (r=0.99) for mercury concentrations ranging from 1.0{\times}10^{-8}{\sim}1.0{\times}10^{-2}M$. At these curves relative standard deviation was 5∼8% and saturation response was not observed at high concentration region. Serine of the employed ligands had the best sensitivity in analytical application, which had greater stability constant in forming a complex with mercury than others as $pK_{Hg}=8.54$. The formation constants of threonine and methionine were respectively 7.04 and 7.80.

• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.202-206
• /
• 2005

The present investigation provides an electromagnetic radiation absorptive composition which comprises silver-coated ferrite microspheres dispersed in silicon rubber matrix for the aim of thin microwave absorber in GHz frequencies. Ni-Zn ferrite spheres with $50{\mu}m$ size in average were prepared by spray-drying and sintering at $1130^{\circ}C$. Conductive silver layer was plated on ferrite spheres by electroless plating. Conductive Ni-Zn ferrite sphere with uniform silver layer were obtained in the concentration of 10 g/L $AgNO_3$ per 20 g ferrite spheres. For this powder, electrical resistance is reduced as low as $10^{-2}\~10^{-3}\;\Omega$. The most sensitive material parameters with silver plating is real and imaginary parts of complex permittivity. The conductive Ni-Zn ferrite spheres have large values of dielectric constant. Due to this high dielectric constant of microspheres, matching thickness is reduced to as low as 2 mm at the frequency of 7 GHz, which is much thinner than conventional ferrite absorbers.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.6-14
• /
• 2001

The monomer N,N'-bis(3-pyrrol-1-yl-propyl)-4,4'-bipyridinium$(PF_6)_2$ was electrochemically polymerized on glassy carbon electrode surface. This polymer film electrode has electroactive sites on its bipyridinium ions distributed at the polymer strands. The formal potentials of the electrodes were -0.41V and -0.81V(vs. SSCE) for each step at phosphate buffer(pH=5.70). The diffusion coefficients of the dopants ions into the polymer matrix were $1.57{\times}10^{-4}$ and $4.35{\times}10^{-5}cm^2s^{-1}$ for first and second redox couple, respectively. The rate constants of electron transfer at $V^{2+/+}$ of the first step was a $57.53s^{-1}$, which was 22 times higher than $V^{+/0}$ one having $2.63s^{-1}$ in the solution. The charge transfer resistance of the polymer film was influenced by the dopant ion of the electrolyte. Thus the resistances were 22.63, 16.81, 12.44 and $11.36k{\Omega}$ for $LiClO_4,\;NaClO_4,\;KClO_4$, and phosphate buffer, respectively. The reaction order of the electropolymerization was first order and the rate constant of the polymerization was $1.31{\times}10^{-1}s^{-1}$ as determined by EQCM method. The G.C./p-BPB type electrode doped with phosphate ions showed a stability and reproducibility in CV procedure over 20 cycles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.230-236
• /
• 2019

Recently, issues related to the quality of concrete have continuously resulted in surface quality problems, such as the exfoliation of concrete surfaces due to the cost reduction of cement and poor quality fine aggregate, scaling of surfaces caused by laitance, and plastic shrinkage cracks. Prompted by social issues, the application of a photo catalyst to road structures is being attempted to solve the environmental problems caused by fine dust and automobile exhaust. In this study, chemical admixtures were developed to improve the surface quality of concrete and to apply and distribute titanium dioxide in nanoscale sizes to provide basic data for the development of a photocatalyst-curing agent. As a result of the experiment, silicon and silane were reviewed as a raw material as a curing agent to develop a high performance curing agent with better film performance than conventional curing agents because they could form a film quickly on a fresh concrete surface. The distributed stability of the ultrasonic disperser showed the best performance through an outdoor test for four weeks to review the dispersion measures for the application of nanomaterials.

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.79-82
• /
• 2010

A 1-year-old intact male Russian blue cat was admitted with a history of depression, partial anorexia, vomiting and dysuria. Through the blood analysis, ultrasonography and urinalysis, this cat was diagnosed as feline lower urinary tract disease with cystitis. Despite antibiotic therapy the cat showed stranguria and urinary catheterization were repeated several times. One week after, this patient appeared depression, hyperthermia and leukocytosis. Ultrasonography revealed a small amount of hypoechoic fluid around the right kidney and bacteria were found in the urine. The amount of the right subcapsular fluid was increased and bacteria were found in the fluid. On the excretory urography, leakage of contrast media were detected. The right kidney was surgically removed and suppurative fluid between the renal parenchyma and the thickened capsule was identified. After surgery, subcapsular abscess of the right kidney associated with pyelonephritis was confirmed histologically and this cat recovered without complications.