• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.702-709
• /
• 2018

A quick-hardened concrete track was developed to improve the aged ballasted track to a concrete track, and applied to earthworks and tunnels of main and urban railways. Rebars for reinforcement are not generally applied to prestressed concrete sleepers. On the other hand, many cracked sleepers have been observed in railroad sites. A wide sleeper, which is one of the main components of quick-hardened concrete track, should be structurally safe and crack-resistant in a ballasted and concrete track to avoid this problem. In particular, a wide sleeper manufactured by a post-tension method must have reinforcing bars applied to the rail-seat section. In this paper, static tests, dynamic tests, and fatigue tests were carried out to compare the flexural strength and crack resistance performance of a wide sleeper with and without reinforcing bars for a quick-hardened concrete track. As a result of the test, if some reinforcing bars are applied appropriately to the rail-seat section of a wide sleeper, it will be possible to prevent the occurrence of cracks, delay the expansion of the crack width, and the flexural fracture.

• Composites Research
• /
• v.26 no.5
• /
• pp.289-294
• /
• 2013

A thinner is used to improve the multi-walled carbon nano-tube (CNT) and carbon black (CB) dispersion in a polymer matrix and to make a soft electrode. The electrical and mechanical properties of the soft electrodes are investigated as functions of CNT, CB and thinner content. The optimal mixing condition for the electrode is thinner 80, CNT 3.5, CB 18 (phr) on the basis of matrix (KE-12). The specific resistance of that is 73 (${\Omega}{\cdot}cm$), and tensile strength, tensile modulus, and elongation of that is 0.45 MPa, 0.21 MPa, and 184%, respectively. Also, a simple structure of the actuator with an optimized electrode and elastomer is fabricated and its characteristic is evaluated. At the operating voltage 25 kV, the displacement of an elastomer KE-12 is 2.24 mm, and that of an elastomer KE-12 with thinner 50 (phr) is 4.05 mm. It shows a higher displacement compared to that of 3M 4910 which has similar modulus. The actuator made with elastomer and electrode of the same material (KE-12) may have advantages for fatigue life and application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1101-1107
• /
• 2016

As an increase in the amount of RAP, there are growing interests in recycling asphalt concrete. In case of using the RAP as recycled asphalt pavement, it tends to be quality deteriorate. Therefore, the amount of RAP using is advised to be limited or has to be used with rejuvenator. In this study, asphalt mixture containing WMRA was analyzed to be used up to 50% for the sake of convenience on the process. As the results of evaluation, there was no significant difference in case of using 30% of RAP in the test of Marshall stability. However, in case of WMRA using up to 50%, it was satisfied criteria by flow value at 34.7. Further, result of toughness test was found that the crack resistance showed 55% higher than using straight asphalt when using WMRA binder up to 50%. According to the results of directly comparing crack resistance through repeated direct tensile test, it was shown that the fatigue crack resistance of WMRA pavement was increased by 263%. Therefore, it was shown that WMRA binder was effective in recycling RAP because WMRA binder could increase the percentage of RAP using up to 50%.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.149-157
• /
• 2001

The purpose of this study was to investigate the property of a new Korean stainless steel wire(Jinsung Ind.) comparing with other foreign Products. Five types of stainless steel wires (Standard, Resilient, HI-T of Unitek, Stainless steel of Ormco and Jinsung Ind.) in 0.016x0.022 and 0.019x0.02 were tested to observe for Composition analysis, size difference, tensile properties, flexure bending property, tortion property, surface hardness and surface topography by means of SEM. The findings suggest that: 1. In maximum tensile strength of tensile properties, Unitek Hi-T showed the greatest value, followed by Unitek Resilient, Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Unitek Hi-T showed highest value, followed by Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Resilient, Unitek Standard in 0.019x 0.025. 2. In elongation rate, Unitek Standard showed the greatest value, fellowed by Ormco Stainless Steel, Unitek Hi-T, Unitek Resilient, Jinsung Stainless Steel in 0.016x0.022, and Unitek Hi-T showed the highest value, followed by Unitek Standard, Ormco Stainless Steel, Jinsung Stainless Steel, Unitek Resilient in 0.019x0.025. 3. In modulus of elasticity, Jinsung Stainless Steel showed the greatest value, followed by Unitek Hi-T, Unitek Resilient, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Unitek Resilient showed the highest value followed by Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Hi-T, Unitek Standard in 0.019x0.025. 4. In bending fatigue test, Jinsung Stainless Steel showed the greatest fracture resistance, followed by Unitek Hi-T, Unitek Standard, Unitek Resilient, Ormco Stainless Steel in 0.016x0.022, and Unitek Hi-T showed the greatest fracture resistance followed by Jinsung Stainless Steel, Unitek Resilient, Unitek Standard, Ormco Stainless Steel in 0.019x0.025. 5. In twist test, Unitek Resilient showed the greatest fracture resistance, followed by Jinsung Stainless Steel, Unitek Hi-7, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Jinsung showed the greatest fracture resistance, followed by Unitek Resilient, Unitek Standard, Ormco Stainless Steel, Unitek Hi-T. 6. In surface topography, every products showed indentation and pitting. Jinsung stainless steel wire showed long thin indentation and relatively smooth surface. Unitek wires showed indentation and pitting and Ormco wire showed a lot of irregular pittings.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.28-35
• /
• 2020

This paper presents the design improvements made for the crack which is in the mounting structure of the mechanical structure of rotary wing aircraft. The doubler added to the mounting structure of rotary wing aircraft was designed and manufactured based on the load at the development stage, and a crack was found in the surface of doubler at a certain point during the operation of the aircraft. To identify the cause of the crack, the initial deformation of the structure, which may occur as a result of fastening condition, was considered and the dynamic analysis of the natural frequency of the structure comparing to the blade passing frequency of the aircraft were additionally reviewed. As a result of this study, a shim was added to remove the physical gap of the fastening area, and a doubler with thickened reinforcement was installed. The increase of structural strength is shown by reviewing the results of dynamic analysis for the structural verification of the improved design, and the fatigue evaluation complied to the requirement of the aircraft lifetime.

• The Journal of Dong Guk Oriental Medicine
• /
• v.7 no.1
• /
• pp.99-117
• /
• 1998

Objective This experimental study was designed to investigate effects of Bo-joong-ik-gi-tang administration among long distance runners on changes of the energy and electrolyte metabolism. Materials and Methods All subjects were divided randomly with two groups, Bo-joong-ik-gi-tang Group (N=4) and control group (N=4) and performed to run the 400m track with 70% of HR max about 1 hour. The blood samples were collected from antecubital vein by 5ml syringes at before exercise, immediately after exercise, recovering-10 min. recovering-30 min, recovering-1 hour. These samples were used to analyze for the factors of the change on metabolic responses. First, the primary factors on the changes of the energy metabolism were checked ; Glucose, Free fatty acid, Lactate, LDH. Second, the primary factors on the changes of the electrolyte metabolism were checked ; Na+, CI-. K+. Results 1. The change of the energy metabolism 1) Glucose response was not shown significant difference between two groups. 2) Free fatty acid response in Bo-joong-ik-gi -tang group was significantly increased at recover-10 min. 3) Lactate response in Bo-joong-ik-gi-tang group was significantly decreased at immediately after exercise, recover-10 min, recover-30 min. 4) LDH response was not shown significant difference between two groups. 2. The change of the electrolyte metabolism 1) Na+ response in Bo-joong-ik-gi-tang group was shown significant difference between two groups at before exercise. 2) Cl- response in Bo-joong-ik-gi-tang group was significantly increased at before exercise, immediately after exercise. 3) K+ response in Bo-joong-ik-gi-tang group was significantly increased at recover-10 min. Conclusion According to the above results, it was shown that Bo-joong-ik-gi-tang had the positive effects on changes of the energy and electrolyte metabolism for the long distance runners.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.2
• /
• pp.29-38
• /
• 2021

According to the theory of concentration recovery(ART), experiencing landscapes with healing properties can heal human mental fatigue caused by intentional concentration. The ART illustrates four healing qualities of the landscape. ART admits that various landscapes can have healing properties, the four healing properties of the landscape explained that the greater the perceptual strength, the stronger the healing effect. Until now, research on healing landscapes has been mainly done on natural and urban landscapes. The purpose of this study is as follows. First, eIt is intended to evaluate the healing characteristics of the Yangdong village landscape using RCS and investigate the impact of the healing characteristics on the visiting preference of the target landscape. Second, Evaluating the landscape image of Yangdong Village landscape, Investigating the effect of landscape images on the healing properties of landscape. This study was conducted in Yangdong Village, Gyeongju, 127 college students participated in the survey. SD 16 items to analyze landscape images and RCS 22 items from Laumann(2001) to evaluate healing properties were used as measurement tools. The findings are summarized as follows. First, The landscape image of Yangdong Village was analyzed through SD method, the analysis of the factors of Yangdong Village landscape image results in two factors: place and singularity. Second, It demonstrates the reliability and validity of RCS, Three factors were extracted from the factor analysis results. Third, Landscape images have a positive effect on the three healing characteristics of RCS. Fourth, Three healing properties of RCS have been shown to have a positive effect on visiting preferences, The order of influence on the relative visiting preferences was analyzed as attractiveness, fit, sense of escape, and sense of space. The findings suggest that future work requires research to re-validate the reliability of RCS. It is also necessary to analyze landscape images for various landscape types to specifically understand the effects on healing characteristics.