• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.282-290
• /
• 2013

Biophysical and biochemical processes through which crops interact with the atmosphere have been simulated using land surface models and crop growth models. The Noah Multi Physics (MP) model and the CERES-Rice model, which are a land surface model, and a crop growth model, respectively, were used to simulate and compare rice growth and evapotranspiration (ET) in the areas near Haenam flux tower in Korea. Simulations using these models were performed from 2003 to 2012 during which flux measurements were obtained at the Haenam site. The Noah MP model failed to simulate the pattern of temporal change in leaf area index (LAI) after heading. The simulated aboveground biomass with the Noah MP model was underestimated by about 10% of the actual biomass. The ET simulated with the Noah MP model was as low as 21% of those with the CERES-Rice model. In comparison with actual ET measured at Haenam flux site, the root mean square error (RMSE) of the Noah MP model was 1.8 times larger than that of the CERES-Rice model. The Noah MP model seems to show less reliable simulation of crop growth and ET due to simplified phenology processes and assimilates partitioning compared with the CERES-Rice model. When ET was adjusted by the ratio between leaf biomass simulated using CERES-Rice model and Noah MP model, however, the RMSE of ET was reduced by 30%. This suggests that an improvement of the Noah MP model in representing rice growth in paddy fields would allow more reliable simulation of matter and energy fluxes.

• Membrane Journal
• /
• v.7 no.3
• /
• pp.150-156
• /
• 1997

The particle back transport velocity from the membrane surface were evaluated to determine the critical flux. Four kinds of back transport mechanisms were considered, i.e. back diffusion, shear induced migration, lateral migration, and interaction enhanced migration. The interaction enhanced migration caused by electrostatic repulsion between particles and membrane surface was found to be the most important mechanism of particle back transport for the charged particles of 0.1 ~10${\mu}{\textrm}{m}$ diameter with 20 to 40 mV of zeta potential. Hematite particles with different sizes were synthesized with ferric chloride (FeCl$_3$) and hydrochloric acid (HCl) at high temperature, and subsequently experimental critical fluxes for each sized particle were obtained. The experimental results were well coincident with the calculated critical fluxes based on back transport mechanisms.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.353-355
• /
• 2000

대기 오염 면상은 인구 증가와 산업화로 날로 심각해지고 있고 이로 인한 영향은 동·식물 뿐만 아니라 건축구조물, 나아가서는 기후변동에까지 미치고 있다. 이러한 오염 물질에 의한 피해 현황과 가까운 미래에 미칠 영향을 예측할 수 있다면 오염 물질의 배출 규제와 방지에 큰 도움을 줄 수 있을 것이다 이에 오염 물질이 미치는 영향을 추정하기 위한 대기오염농도 예측모델의 연구는 많은 학자들에 의해 다양한 방법으로 추진되어 왔고 이와 함께 건성 침적 모듈의 연구도 지속적으로 이루어져 왔다. (중략)

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.198-204
• /
• 2010

Solids flow characteristics have been determined in a pressurized solids recycle systems of silica sand particles for the application in a pressurized CFB(PCFB). The solids recycle system is composed of a downcomer(0.10 m i.d. 2.25 m high) and a loop-seal(0.10 m i.d.). The silica sand($d_p=240{\mu}m$, ${\rho}_s=2582kg/m^3$) particles were transported at room temperature and system pressure($P_{sys}$) up to 0.71 MPa using air. Solids mass flux($G_s$) increases with increasing system pressure at constant aeration rate. Pressure gradient, solids velocity and actual gas velocity increase with increasing $P_{sys}$ at constant aeration rate. The Pressure drop number($\Phi$) on pressure gradient in downcomer has been correlated with Transportation number(Tr). Pressure drop across the loop-seal increases with increasing of $G_s$ irrespective of variation of $P_{sys}$. The obtained $G_s$ and Transportation number(Tr) have been correlated with the experimental variables.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2008

In this study, an analytical model has been developed to predict the build-up of heat field due to a point heat source in the presence of sharp cross-flow depth change. The model has been applied to investigate the effect of the depth change and flow pattern on the heat field. Model results show that, when there is a sharp depth change in cross-flow direction, the heat transport across the boundary of the depth change is enhanced or diminished according to the increasing or decreasing of the horizontal diffusion flux. Including residual components as well as tidal currents give rise to reduce the effect of the horizontal diffusion on the heat transport because of increasing the advection of heat.

• Journal of Environmental Impact Assessment
• /
• v.11 no.3
• /
• pp.173-187
• /
• 2002

토양 속에서 발생될 수 있는 용질과 용매의 복합 수송시스템을 대상으로 한 연구 중 회석상태로부터 포화상태에 이르기까지의 넓은 농도분포를 가지는 토양 용액에 적용될 수 있는 물리 화학적 이론에 입각한 지배방정식을 발표한 연구는 전무한 실정이다. 본 연구는 용매와 토양기체간 그리고 용질과 결정간의 상변화를 고려한 연립물질수지방정식을 제시하고, 여기에 타율적 대류를 포함하는 상호확산 분산수송방정식을 도입하여 대류와 확산에 관한 프럭스를 분리, 결정하는 것을 목적으로 한다. 대류 플럭스의 결정은 타율적으로 이루어지는 것이 이론적으로 타당하며, 이러한 타율적 대류 플럭스가 제공된다면 본 연구에서 제시된 지배방정식을 이용해서 토양용액의 복합수송 시스템을 범용적으로 해석, 예측할 수 있을 것으로 판단된다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.47.2-47.2
• /
• 2010

태양플레어는 태양 대기에서 발생하는 격렬한 폭발현상으로 이를 예측하고 대비하기가 쉽지 않다. 본 연구에서는 플레어의 발생 확률이 태양 흑점 분류와 흑점 면적 변화량에 어떻게 의존하는 가를 조사하였다. 이를 위하여 약 9년 기간(2001년 7월 ~ 2010년 6월) NOAA에서 제공하는 AR(Active Region) 정보에 근거한 McIntosh 흑점 분류법을 사용하였다. 플레어는 C 등급 이상(C,M,X)인 것만을 고려하였다. 본 연구에서는 60개의 McIntosh 흑점군 그룹 중 가장 플레어를 많이 발생시키는 6개의 흑점군 그룹에 대해 태양 흑점 면적의 변화량을 각각 3그룹으로 나누어(감소, 무변화, 증가) 비교해보았다. 그 결과 거의 모든 그룹에서 태양 흑점의 넓이가 증가, 감소, 무변화 순으로 플레어의 발생 확률이 높다는 것을 확인하였다. 예로, 흑점군 그룹 중 Fkc그룹의 경우 위의 순서대로 65%, 50%, 44%로 M등급의 플레어가 발생했다. 흑점의 면적 변화가 자기플럭스의 변화를 나타내는 좋은 인자임을 고려할 때, 본 결과는 새로운 자기플럭스가 광구로 상승하는 경우에 플레어의 발생 확률이 더 높음을 보여준다. 본 연구 결과를 토대로 태양 흑점 분류와 면적의 변화량에 따른 플레어 발생 확률 연구의 발전방향과 활용 방안에 대해 논의하고자 한다.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.1-5
• /
• 2017

This objective of this study is an effort to predict atomic oxygen (ATOX) erosion as ot affects coating material(s) of LEO satellite's solar array by implementing the 'real ram direction accumulation method'. We observed the difference of ATOX Fluence between the previous 'Maximum worst case estimation method' and 'Real ram direction accumulation method' and we plan to implement these findings for the purpose of evaluating the level of compliance for design submitted by solar array suppliers. We used the SPENVIS(Space Environment Information System) served by ESA based on assumption orbit information, and applied the satellite orbit calculation software for calculating the ATOX Flux crushed solar array in real orbit surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2187-2195
• /
• 2000

A water treatment system using membrane separation technology can provide stable effluent quality and its maintenance is relatively easy comparing to the conventional water treatment system. In addition, the membrane filtration system is very compact such that it can replace existing water treatment processes of coagulation/sedimentation/filtration by only one process. However, a major problem associated with membrane filtration is flux decline with operating time due to concentration polarization and fouling, so a systematic study on evaluation of long-term filtration performance is necessary. A membrane filtration system using tubular type ultrafiltration membranes with MWCO of 30.000 Da was constructed for this study and it had been operated in a feed-and-discontinuous bleed mode. Flux was stabilized after operation of 1.500 hours and maintaining above 25 LMH until 4.000 hours. Contaminants causing SS and turbidity were almost completely removed while the $UV_{260}$ and DOC removals were 55% and 49%, respectively. A simple mass balance equation was developed to predict maximum concentrations of SS, turbidity, $UV_{260}$ and DOC in a operation cycle. For SS and turbidity the measured max, concentrations in each cycle agree well with the predicted values while the measured max, concentrations of $UV_{260}$ and DOC were 59% and 37% of the predicted values, respectively.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.484-490
• /
• 2014

To find out the feasibility of the separating/enriching esters from aqueous solution using FASs (Fluoloalkyl-silanes-coupling agent)-surface modified hydrophobic membrane, the solubility parameter of FASs was obtained and compared with those of esters and water. The value of the solubility parameter of FASs (${\delta}_t=16.9$) was almost same with those of esters (ethyl acetate ${\delta}_t=18.1$, propyl acetate ${\delta}_t=18.0$, ethyl propionate ${\delta}_t=17.9$, butyl acetate ${\delta}_t=17.4$, ethyl butyrate ${\delta}_t=17.0$). However, the calculated value of the solubility parameter of water was ${\delta}_t=47.8$, which was far from the value of the solubility parameter of FASs (${\delta}_t=16.9$). This means that the FASs-modified membrane has a much higher affinity to esters than water. The experimental results of permeation flux of esters used in this study showed that the order of permeation flux predicted by the solubility parameter was almost coincide with experimental results. It might be concluded that the solubility parameter may be applicable for a separating/enriching flavors from aqueous natural-flavor solution, in which esters are main components of natural flavors.