Tetrafluoromethane($CF_4$) has been used as etching and chamber cleaning gases for semiconductor manufacturing processes. These gases need to be removed efficiently because of their strong absorption of infrared radiation and long atmospheric lifetime which causes the global warming effect. We have developed a waterjet gliding arc plasma system in which plasma is combined with waterjet and investigated optimum operating conditions for efficient $CF_4$ destruction through enlarging discharge region and producing large amount of OH radicals. The operating conditions are waterjet flow rate, initial $CF_4$ concentration, total gas flow rate, specific energy input. Through the parametric studies, the highest $CF_4$ destruction of 97% was achieved at 2.2% $CF_4$, 7.2 kJ/L SEI, 9 L/min total gas flow rate and 25.5 mL/min waterjet flow rate.
Journal of the Korean Institute of Telematics and Electronics
/
v.26
no.4
/
pp.67-72
/
1989
Room Temperature Plasma Nitridation of silicon was investigated as a new LOCOS (local oxidation of silicon) process in order to reduce the bird's beak length. In $N_2$ plasma formed by 100kHz, 400W AC power, a thin silicon nitride film (<100${\AA}$) was uniformly grown on a silicon substrate. SEM studies showed that the nitride layer formed by this method can effectively protect the silicon from oxidation and reduce the bird's beak length to $0.2{mu}m$ when 4000${\AA}$ field oxide is grown. This is a considerable improvement comparing with 0.7${mu}m,$ the bird's beak, for the conventional LOCOS process using a thick LPCVD nitride. No appreciable crystalline defect could be found around the bird's beak with SEM cross-section afrer Secco etch. Leakage current tests were carried out on the $N^+/P^-$ well and $P^+/N^-$ well diodes formed by this new LOCOS process. The electrical tests indicate that this new process has electrical properties similar or superior to those of the conventional LOCOS process.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.30
no.2
/
pp.66-72
/
2020
The difference of plasma resistance between the CAS glass bulk and coating films were compared. Plasma resistance was confirmed by analyzing the etch rate and the microstructure of the surface when the CAS glass bulk and the glass coating film were etched with CF4/O2/Ar plasma gas. CAS glass coating film was etched up to 25 times faster than the glass bulk. A statistically high correlation between the surface roughness and the etching rate of the coating film was derived, and thus, the high surface roughness of the coating film was determined to cause rapid etching. In addition, cristobalite crystals that has a low Ca content and a high Si content, was foamed on the glass coating film. Therefore, the CAS glass coating film is considered to have low plasma resistance compared to the glass bulk.
Journal of the Korean Institute of Telematics and Electronics D
/
v.35D
no.5
/
pp.54-62
/
1998
In a plasma etching system, ions become an important parameter in determining the wafer topography which depends on both the physical sputtering mechanism and the chemically enhanced reaction. this paper reports the energy and angular distributions of ions across the plasma sheath using a monte carlo method. The ion distribution is mainly affected by the magnitude of the sheath voltage and by the collision in the sheath. Furthemore, the local potential distribution in a plamsa sheath has been determined by solving the poisson's equation. In th is work, ionic collisions were cosidered in terms of both charge exchange and momentum transfer. The three-dimensional distributions of ions were calculated with varying the input process conditions in the plasma reactor.
As the IT industry rapidly progresses, the functions of electronic devices and display devices are integrated with high density, and the model is changed in a short period of time. To implement the integration technology, a uniform micro-pattern implementation technique to drive and control the product is required. The most important technology for the micro pattern generation is the exposure processing technology. Failure to implement the basic pattern in this process cannot satisfy the demands in the manufacturing field. In addition, the conventional exposure method of the mask method cannot cope with the small-scale production of various types of products, and it is not possible to implement a micro-pattern, so an alternative technology must be secured. In this study, the technology to implement the required micro-pattern in semiconductor processing is presented through the photolithography process and plasma etching.
To produce a fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_2O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The barrier ribs was etched with several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2016.11a
/
pp.191.1-191.1
/
2016
본 연구에서는 알루미늄 합금의 PEO(Plasma Electrolytic Oxidation) 피막 형성 거동을 PEO 처리 용액 조성, 온도 및 합금 성분에 따른 전압-시간 곡선을 관찰하여 분석하였다. 알루미늄 합금의 PEO 피막 형성거동은 NaOH 농도, 전해질 온도, 인가 전류밀도 및 합금성분에 따라 다양하게 나타났다. 본 연구에서는 직류 정전류법을 이용하여 Al1050, Al5052, Al6061 합금 표면에 PEO 피막을 형성시켰으며, PEO 피막의 형성이 시작되는 전압 및 발생된 아크의 크기 및 모양을 관찰하여 PEO 피막 형성 거동을 연구하였다. 연구결과 PEO 처리 중의 전해액의 온도가 낮고 전류밀도가 높을수록 시편 표면에서 짧은 시간 내에 아크가 발생하였으며, 전압-시간 곡선은 빠른 속도로 PEO 피막생성 전압에 도달하여 유지되는 거동을 보였다. 동일한 용액조성, 용액온도, 용액 교반속도 및 인가전류밀도에서 관찰된 PEO 피막 형성 거동은 동일시편을 PEO코팅 후 에칭하여 반복 실험할 경우에도 큰 편차를 보였으며, 이로부터 시편의 조성이나 불순물의 존재 등이 크게 영향을 주는 것을 알 수 있었다.
Journal of the Korean Institute of Electrical and Electronic Material Engineers
/
v.17
no.4
/
pp.373-377
/
2004
We have investigated the electrical characterization of metal-oxide-semiconductor (MOS) capacitors formed on the inductively coupled plasma (ICP) etch-damaged both n- and p-type 4H-SiC. We found that there was an effect of a sacrificial oxidation treatment on the etch-damaged surfaces. Current-voltage and capacitance-voltage measurements of these MOS capacitors were used and referenced to those of prepared control samples without etch damage. It has been found that a sacrificial oxidation treatment can improve the electrical characteristics of MOS capacitors on etch-damaged 4H-SiC since the effective interface density and fixed oxide charges of etch-damaged samples have been found to increase while the breakdown field strength of the oxide decreased and the barrier height at the SiC-SiO$_2$ interface decreased for MOS capacitors on etch-damaged surfaces.
반도체 가스의 순도에 따라 반도체 박막의 특성이 좌우되기 때문에 현재의 고순도 가스에서 초고순도 가스로 사용하여야 한다. 최근 반도체 공정기술은 화학증착법으로 많은 특수 가스를 사용하는데 이런 가스들은 사전에 가스에 대한 전문 지식과 기술을 충분히 이해한 다음 사용하여야만 고성능화 공정기술이 가능하다. 반도체용 가스는 회로의 집적도가 높아짐에 따라 요구되는 가스의 품질이 점점 고순도화되고 있다. 따라서 현 반도체 공정에 사용되는 가스 순도를 초고순도화 시켜야만 초고집적 소자인 4M DRAM, 16M DRAM, 64M DRAM 제품 개발 및 제조가 가능하다. 다시말해서 공정에 따른 주변조건이 이루어져야 만 반도체 산업이 크게 신장 할 수 있다. 최근 반도체 공정 기술로는 플라즈마(Plasma), 드라이에칭(Dry etching), CVD(Chemical Vapor Deposition), MOCVD(Metal Organic Chemical Vapor Deposition), Ion Implantation, EPI 공정으로 거의 대부분 공정 가스가 가연성, 폭발성, 독성, 부식성 이기 때문에 한번 취급을 잘못하면 막대한 인명 및 재산 피해를 입히므로 취급상 특별한 주의를 요하고 사전에 가스의 전문 지식과 기술을 충분히 이해한 다음 사용하여야 한다.
This study has been focused on properties of surface technology for large diameter upper electrode using in high density plasma process as like semi-conductor manufacturing process. The experimental studies have been carried out to get mirror surface for upper electrode. For a formation of high surface quality upper electrode, single crystal silicon upper electrode has been mechanical and chemical machining worked. Mechanical machining work of the upper electrode is carried out with varying mesh type using diamond wheel. In case of chemical machining work, upper electrode surface roughness was observed to be strongly dependent upon the etchant. The different surface roughness characteristics were observed according to etchant. The machining result of the surface roughness and surface morphology have been analyzed by use of surface roughness tester, laser microscope and ICP-MS.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.