Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.398-398
/
2011
텍스처링은 입사된 태양빛을 산란시켜 보다 많은 포톤이 흡수층에 흡수하도록 하여 태양전지의 효율이 증대되기 때문에 텍스처링과 관련된 다양한 연구가 진행되고 있다. 본 연구에서는 ICP 플라즈마 장치를 이용하여 바이어스 유무에 따른 유리기판에 텍스처링을 진행하였다. 텍스처링 된 유리기판에 Boron이 도핑된 ZnO 박막을 MOCVD로 증착하여 각 투명전극의 광학적 특성을 분석하였다. 또한 투명전극이 증착된 기판에 박막실리콘 태양전지를 제작하여 텍스처링 특성에 따른 태양전지 특성을 분석하였다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2015.11a
/
pp.168-168
/
2015
플라즈마를 이용하여 PET표면에 나노구조를 형성시킨 후 무전해 도금에 의해 구리를 코팅함으로써 플랙서블한 Cu/PET 기판을 제조하였다. 플라즈마 에칭시간을 달리하여 나노구조의 크기와 모양을 변화시켰으며 나노구조의 크기와 모양의 변화에 따른 Cu와 PET의 접합강도와 피로특성을 평가하였다.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.328-328
/
2011
전기장 E와 자기장 B가 서로 수직으로 인가된 플라즈마에서 전자와 이온의 이동 현상은 이미 널리 알려져 있다. 그런데 최근 플라즈마 응용 산업의 발달에 따라 음이온을 포함한 플라즈마에서 나노미립자의 운동에 대한 해석이 필요하다. 특히 실리콘 박막의 에칭, 스퍼터링, PECVD 등의 공정에 사용되는 실란 플라즈마에서 음이온의 발생에 따른 오염은 주요한 문제가 된다. 따라서 본 연구에서는 이러한 음이온을 제거하기 위해 E${\times}$B 드리프트 운동을 이론적으로 계산 하였다. 결과적으로 음으로 대전된 나노미립자는 E${\times}$B 드리프트 운동의 반대 방향으로 이동 하였고, 드리프트 속도는 자속밀도가 증가함에 따라 함께 증가됨을 보였다. 따라서 서로 수직으로 인가된 전자기장에 의한 E${\times}$B 드리프트 운동을 통해 음이온을 방전 공간에서 제거할 수 있음을 알 수 있었다.
Proceedings of the Materials Research Society of Korea Conference
/
1997.10a
/
pp.29-29
/
1997
화학반응 또는 화학증착분야에 주로 이용해 오던 유도플라즈마를 이용하여 고밀도의 두꺼운 세라믹 침적물을 제조하였다. Yttria Stabilized Zirconia 분말을 이용하여 최적조건에서 두께 약 5mm, 이론밀도 90% 이상의 침적물을 얻었다. 실험변수는 플라즈마 가스조성, 플라즈마동력, 입자의 크기, 용사거리 등으로 하였으며, 각각의 실험조건에서 용사된 spherodized particle을 수집하여 각 실험조건에서 용융된 입자의 상태를 비교하였다. 또, 침적물의 표면을 에칭시켜 각 실험조건에서의 침적상태를 관찰 및 비교하여 각각의 실험변수가 침적물의 밀도에 미치는 영향을 관찰하였다. 실험결과 높은 밀도의 침적물을 만들기 위해서는 분말의 용융상태, 용사챔버 내부압력, 분말분사거리가 중요한 변수임을 알 수 있었다. 실험에서 얻어진 결과는 ANOVA 통계기법으로 분석하여 단일변수의 영향뿐만 아니라 이들 영향이 서로 조합하여 결과에 미치는 조합효과도 분석하였다.
Proceedings of the Korean Vacuum Society Conference
/
2000.02a
/
pp.133-133
/
2000
알루미늄 산화막은 알루미늄 전해 커패시터의 유전재료로 많이 사용되고 잇다. 기존의 생산 공정은 양극 산화법에 의한 산화막 형성으로 대부분이 이러한 습식 공정으로 생산되고 있다. 이 양극 산화법 방식은 장점도 있으나 폐기물이 많이 발생되는 단점이 있다. 본 연구에서는 폐기물의 발생을 획기적으로 줄일 수 있고 산화막 형성 효율을 높일 수 잇는 방식으로 activated reactive evaporation(ARE)을 도입하였다. 이 방식은 electron-beam에 의해 알루미늄을 증착시킬 때 plasma를 챔버 내에 발생시켜 활성 반응으로 알루미늄 원자가 산소와 반응하여 기판위에 Al2O3가 증착되는 것이다. 이 방식은 기계적 작동이 단순하고 증착이 되는 여러 변수들의 독립적 조절이 가능하므로 증착을 제어하기 쉽기 때문에 바로 산업 현장에서 적용될 수 있을 것으로 전망되어 본 연구에 도입하게 되었다. 기판은 유전용량을 증가시키기 위하여 알루미늄 원박을 에칭하였다. 이것은 기판으로 쓰일 알루미늄의 표면의 표면적을 증가시키기 위한 것으로, 알루미늄 전극의 표면적을 확대시키면 유전용량이 증가된다. 99.4%의 50$\mu\textrm{m}$와 60$\mu\textrm{m}$ 두께의 알루미늄 원박을 Ar 이온빔에 의해 1keV의 에너지로 20mA로 에칭을 하였다. 에칭 조건별로 에칭상태를 조사하였다. 에칭 후 표면 상태는 AFM으로 관찰하였다. 화성 실험은 진공 챔버 내의 진공을 약 10-7 torr까지 내린 후, 5$\times$10-5 torr까지 O2와 Ar을 주입시킨 다음 filament에서 열전자를 방출시키고 1.2 kV의 electrode에 의해 가속시켜 이들 기체들의 플라즈마를 발생시켰다. e-beam에서 증발된 알루미늄과 활성 반응을 이루어 기판에 Al2O3가 형성되었다. 여러 증착 변수들(O2와 Ar의 분압, 가속 전압, bias 전압 등)과 산화막의 상태 등을 XPS(X-ray photoelectron spectroscopy), AFM(Atomic Force Microscopy), XRD(X-Ray Diffraction), EXD로 조사하였다.
The surfaces of injection and pressure-molded sheets of poly(ethylene-covulylacetate)(EVA) foams used for shoe mid-sole were treated with low temperature plasma to improve adhesion with a water-based polyurethane adhesives. Several experimental variables were considered, such as radio frequency power, treating time, type of gas. gas flow, and distance between electrode and sample. The modificated surface by plasma treatment were characterized using contact angle meter, scanning electron microscopy(SEM), universal testing machine(UTM). Adhesion was tested by T-peel tests of treated EVA foams/polyurethane adhesive joints. The treatment in the low temperature plasma produced a noticeable decrease in contact angle. The peel strength of EVA foams treated with plasma was increased with plasma treating time, and gas flow.
Park, Myeong-Gu;An, Tae-Hang;Lee, Jong-Mu;Jeon, Hyeong-Tak;Ryu, Geun-Geol
Korean Journal of Materials Research
/
v.6
no.7
/
pp.661-670
/
1996
리모트 수소 플라즈마를 이용하여 실리콘 웨이퍼 표면 위에 있는 금속불순물의 제거 및 제거기구에 관하여 조사하였다. 실리콘의 표면과 내부분석을 위하여 TXRF(total reflection x-ray fluorescence)와 SPV(surface photovoltage), AFM(atomic force microscope)을 사용하였다. TXRF 분석결과 리모트 수소 플라즈마가 금속오염물질 제거에 상당한 효과가 있는 것으로 나타났다. TXRF분석결과 리모트 수소 플라즈마가 금속오염물질 제거에 상당한 효과가 있는 것으로 나타났다. 리모트 수소플라트마 처리 후 금속오염은 금속원소의 종류에 따라 1010atoms/$\textrm{cm}^2$-1011atoms/$\textrm{cm}^2$수준이었다. SPV분석결과를 보면 수소 플라즈마 처리에 의해 minority carrier 수명이 전반적으로 증가하였다. AFM 분석을 통하여 수소 플라즈마 처리가 표면 손상을 일으키지 않으며 표면의 거칠기에 나쁜 영향을 미치지 않음을 알 수 있었다. 또한 본 실험에서 나타난 결과들을 종합해 볼 때 금속오염물의 제거기구는 자연산화막 혹은 수소로 passivate된 실리콘 웨이퍼 표면을 수소 플라즈마에서 발생된 수소원자가 실리콘표면을 약하게 에칭할 때 떨어져 나가는 'lift-off'가 유력한 것으로 판단된다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.6
no.1
/
pp.99-102
/
2002
Pinholes on the thermally grown oxide, which is called gate oxide, on silicon substrate under polysilicon layer are found and its mechanism is analyzed in this paper. The oxide under a polysilicon layer is broken during the plasma etching process of other polysilicon layer. Both polysilicon layers are separated with 0.8${\mu}{\textrm}{m}$ thick oxide deposited by CVD (Chemical Vapor Deposition). Since broken oxide points are found scattered around an arc occurrence point, it is assumed that an extremely high electric field generated near the arc occurrence point makes the gate oxide broken. 1'he arc occurrence point has been observed on the alignment key and is the mark of low yield. It is found that any arc occurrence can cause chips to fail by breaking the gate oxide, even if are occurrence points are found on scribeline.
Kang, Hyo Min;Kim, Jaehyung;Lee, Sang Hyuk;Kim, Kiwoong
Journal of the Korean Society of Visualization
/
v.19
no.3
/
pp.123-129
/
2021
Many plants and animals in nature have superhydrophobic surfaces. This superhydrophobic surface has various properties such as self-cleaning, moisture collection, and anti-icing. In this study, the superhydrophobic properties of PTFE surface were treated by plasma etching. There were four important factors that changed the surface properties. Micro-sized protrusions were formed by plasma etching. The most influential parameter was RF Power. The contact angle of the pristine PTFE surface was about 113.8°. The maximum contact angle of the surface after plasma treatment with optimized parameters was about 168.1°. In this case, the sliding angle was quite small about 1°. These properties made it possible to remove droplets easily from the surface. To verify the self-cleaning effect of the surface, graphite was used to contaminate the surface and remove it with water droplets. Graphite particles were easily removed from the optimized surface compared to the pristine surface. As a result, a surface having water repellency and self-cleaning effects could be produced with optimized plasma etching parameters.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.