• Superconductivity and Cryogenics
• /
• v.2 no.1
• /
• pp.41-46
• /
• 2000

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.702-708
• /
• 2010

Reaction wheel assemblies(RWA) are expected to be one of the largest high frequency disturbance sources to the optical payload of satellites. To ensure the tight pointing-stability budget and high image quality of satellites, a vibration isolation device should be applied to the main disturbances. For developing the isolating system, the disturbances need to be identified and modeled accurately. In the present study, a modeling technique of RWA and its disturbance was described. The micro-vibration disturbances were generated numerically by using an analytical wheel and disturbance model. The parameter estimation scheme of the model was suggested, and the RWA and disturbance modeling technique was verified through the numerical example analysis. The analytical results show that the wheel and disturbance model can be accurately established by using the modeling technique proposed in the present study. The wheel and disturbance model is expected to be useful for development of the RWA isolator system.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.24-26
• /
• 2003

본 연구에서는 고효율, 반영구적인 수명 및 환경친화성으로 인해 효과적인 전력저장장치로 대두되고 있는 플라이휠 에너지 저장시스템 (FESS : Flywheel Energy Storage System)의 구동원으로 적용되는 전동발전기와 전력변환기에 대한 설계 및 제작을 수행하였다. 연구 대상 FESS의 저장용량은 5[kWh]이며 운전 속도는 30,000rpm이다. 전동발전기는 슬롯리플에 의한 와전류 손실이나 열손실을 고려하여 슬롯리스 Ring-wound형으로 선정하였으며, 전력변환기는 PWM Boost 컨버터를 통해 역률 및 DC 전압제어 그리고 Full Bridge 인버터를 통해 전동발전기 고속운전 제어를 실현할 수 있는 Topology를 채택하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.147-154
• /
• 2003

Radial Dual Mass Flywheel(RDMF) is designed to reduce torsional vibration and noise occurring in automotive powertrain. In this paper, finite element method is used to evaluate stress level and critical area of the torsional spring box, a major part of RDNF system. In finite element analysis, both static and dynamic loadings are considered and it is found that the most critical spot is the welded zone of spring box. Also, fatigue test is performed and fractured surfaces are examined to find fatigue stress level by experiment.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.963-967
• /
• 2007

Flywheel energy storage systems (FESS) have advantages over other types of energy storage methods due to their infinite charge/discharge cycles and environmental friendliness. The system has two radial bearings and one hybrid-thrust bearing. Thrust hybrid-type bearing use permanent magnet to relieve gravity load. The radial bearings were designed to provide sufficient force slew rate considering the unbalance disturbance at the operating speeds. In this paper, we will derive dynamic model of hybrid-type bearing using permanent magnet for thrust bearing and present simulation and stability of the model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1096-1101
• /
• 2008

When we design a controller for the active magnetic bearings that support a large rotor, it is important to have an accurate model of the rotor. For the case of the flywheel that is used to store energy, an accurate rotor model is especially important because the dynamics change with respect to the running speed due to gyroscopic effects. In this paper, we present a procedure of obtaining an accurate rotor model of a large flywheel energy storage system using finite-element method. The model can predict the first and the second bending mode which match well with the experimental results obtained from a prototype flywheel energy storage system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.137-143
• /
• 2012

This study analyzes flywheel through the analyses of stress, fatigue and vibration. Maximum equivalent stress is 15.271MPa at the mid round shape and maximum deformation is 0.02264mm at the outer teeth. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of -$10^4$MPa and the amplitude stress of 1000 to 2900MPa, the possibility of maximum damage becomes 30%. This stress state can be 20 times greater than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The range of natural frequencies becomes 200 to 820Hz and the values of these deformations are not more than 10mm. The structural result of this study can be effectively utilized with the design of flywheel by investigating prevention and durability against its damage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.986-990
• /
• 2002

Dual Mass Flywheel(DMF) is used in order to improve the vibration characteristics of drivetrain of manual transmission vehicles. Regardless of its complexity and high cost, application of DMF is keep increasing due to a trend of using Diesel engines in passenger cars and light weight design of drivetrains. Modeling and analysis of DMF is rather simple, but finding out optimum parameters of damper may not be easy. Furthermore, its realization in DMF has some limitations due to DMF's structure and its structure dependent damping characteristics. Requirements on spring-damper characteristics of DMF has been reviewed and investigations on structures and damping characteristics of currently Produced DMFs have been made in this paper. Also, ideal spring and damper characteristics has been proposed based on such investigations.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.891-898
• /
• 1999

The purpose of Superconducting Magnetic Bearing Flywheel Energy Storage System (SMB-FESS) is to store unused nighttime electricity until it is needed during daytime. An analytical model of the SMB-FESS is necessary to identify the system behavior. At first, we have to model the superconducting magnetic bearing. Modeling the SMB is same as estimating the bearing parameter. The theoretical modal parameter is calculated through the equation of motion and the experimental modal parameter is estimated through the impact testing (modal testing). The bearing parameter is searched by using the non-linear least square method until the theoretical result corresponds to the experimental result. The suggested modeling method is verified by comparing experimental and analytical frequency response function.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.93.1-93.1
• /
• 2012

세라믹 고온초전도체는 에너지 저장장치의 핵심소재로 사용된다. 초전도 플라이휠 에너지 저장장치(Superconductor flywheel energy storage system)는 전기 에너지를 운동 에너지로 변환하여 저장하는 친환경, 고효율 에너지 저장장치이다. 에너지를 최소화하는데 사용되는 초전도 베어링은 고온초전도체와 영구자석으로 구성된다. 베어링에는 희토류계 초전도 물질(RE-Ba-Cu-O, RE:Rare-earth elements)가 사용된다. 베어링의 효율은 영구자석의 자력크기, 초전도체의 자기부상력과 포획자력에 비례한다. 에너지 저장효율을 높이려면 고온 초전도체의 임계전류밀도(초전도체 내부에 흘릴 수 있는 전기량)를 높이고, 초전도 결정립의 크기를 키워야 한다. 결정크기를 키우는 공정으로 종자결정성장법(Seed growth process)이 사용된다. 초전도체 제조공정은 분말의 성형, incongruent melting을 포함하는 부분 용융, 액상에서의 입성장, 포정반응을 통한 초전도 결정의 성장과정을 포함한다. 본 발표에서는 초전도 에너지 저장장치의 기본 원리, 초전도 베어링의 구성, 베어링용 초전도체의 제조방법과 특성(자기부상력과 포획자력) 평가기술, 차세대 에너지 저장장치로서의 초전도 플라이휠 에너지 저장장치의 전망에 대해 요약하였다.