• 제목/요약/키워드: 플라스틱 사출

검색결과 216건 처리시간 0.024초

재활용 고강도 폴리스틸렌(HIPS)의 강도 특성에 관한 연구 (The Research about Strength Properties of Recycled High Impact Polystyrene)

  • 김종순;강태호;이용연;김영수;김인관
    • 한국자원리싸이클링학회:학술대회논문집
    • /
    • 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
    • /
    • pp.113-118
    • /
    • 2005
  • 플라스틱 재활용에서 물성변화에 대한 신뢰성의 확보는 재활용을 확대시킬 수 있는 중요한 과제이다. 폴리 스틸렌과 같은 열가소성수지는 재활용이 가능하지만 재활용 수지에 대한 균일한 물성의 신뢰성이 부족하기 때문에 제한적으로 사용되고 있다. 본 연구는 고강도 폴리 스틸렌(HIPS)을 대상으로 재활용의 정도에 따른 물성의 변화를 실험적으로 수행하였다. 재활용을 하지 않은 수지와 재활용 수지를 중량비를 기준으로 혼합하여 실험을 수행하였으며, 이에 따른 기계적인 물성의 변화를 측정하였다.

  • PDF

초정밀 광학렌즈의 복굴절 예측과 금형 전사성 (Verification for transcription of spherical radius and prediction of birefringence in injection molding optical lens)

  • 오오모리 히토시;곽태수
    • 한국정밀공학회지
    • /
    • 제22권6호
    • /
    • pp.55-60
    • /
    • 2005
  • This paper has been focused in developing of plastic lens with ultra-precision and low birefringence ability using by injection molding simulation tools. The simulation tools, $3D-Timon^{TM}\;and\;Asu-Mold^{TM}$ were applied to visualize indirectly the flow pattern of melted polymer enter the mould and the simulation results are verified as compared with the experimental results. Birefringence and polarized light generated in injection molding process was also calculated for each injection conditions and compared with .the pictures of experimented optical lens go through the polarized light plates device. A spherical radius of plastic optical lens transcribed from profile of mould core surface was measured to estimate the geometrical accuracy fer the each injection conditions. It is confirmed that the simulation results about flow pattern and polarized light area coincided in experimental results. It is known that increasing in thickness shrinkage at center of lens, the spherical radius is larger from comparing the graph measured spherical radius and the thickness shrinkage at center of lens

알터네이터 스풀 고속 검사를 위한 자동화 비전시스템 설계 (Design on Automatic Vision System for Fast Alternator Spool Inspection)

  • 장봉춘
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4145-4150
    • /
    • 2010
  • 본 논문에서는 자동차 핵심부품 중 하나인 알터네이터 수풀의 육안검사를 대체하기 위한 머신비전시스템을 설계하는 데 목적이 있다. 플라스틱 사출물인 알터네이터 스풀의 경우 일반적으로 미성형, 찍힘, 뜯김, 크랙 등의 불량 유형이 발생한다. 스풀을 고속으로 전수검사하기 위하여 설계의 실패 사례를 예로 들었고, 이를 통해 최적의 고속 자동화 머신비전 시스템을 설계하고 2차 협력 업체인 중소기업을 위해 저비용 검사 시스템에 초점을 맞추고자 한다. 3차원 설계 소프트웨어인 Pro-Engineer와 CATIA가 사용되었다. 개발 제작 될 시스템은 산업현장에 적용하여 절대적 판정의 안정성을 도모하고, 생산성 향상을 위한 사이클 타임을 충족하는 데 기여할 수 있다.

高密度 폴리에틸렌 材料의 再活用 混合比가 成形品에 미치는 影響 (The Effect on Recycled resin Ratio of High Density Polyethylene on the Molded Parts)

  • 강태호;김인관;김영수
    • 자원리싸이클링
    • /
    • 제13권5호
    • /
    • pp.23-27
    • /
    • 2004
  • 플라스틱 중에서 열가소성 수지는 재활용이 가능하지만 재활용 수지에 대한 균일한 물성의 신뢰성이 부족하기 때문에 제한적으로 사용되고 잇다. 정확한 재활용의 정도에 따른 물성을 파악하여 사용 범위를 규정하는 것은 제한된 자원을 효율적으로 사용할 수 있는 중요한 방법이라 하겠다. 본 연구는 고밀도 폴리 에틸렌(HDPE)을 대상으로 재활용의 정도에 따른 물성의 변화를 실험적으로 수행하였다. 재활용을 하지 않은 수지와 재활용 수지를 중량비를 기준으로 혼합하여 실험을 수행하였으며 기계적인 물성의 변화를 측정하였다.

급속가열용 플라스틱 사출금형을 위한 고기능성 표면처리 (High functional surface treatments for rapid heating of plastic injection mold)

  • 박현준;조균택;문경일;김태범;김상섭
    • Design & Manufacturing
    • /
    • 제15권3호
    • /
    • pp.7-12
    • /
    • 2021
  • Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al2O3 coating and DLC coating were compared to find the optimal surface treatment method. Al2O3 coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

사출성형의 냉각 파라미터가 플라스틱 롤러의 수축에 미치는 영향 (The effect of injection molding cooling parameters on shrinkage of plastic roller)

  • 조성기;한성렬
    • Design & Manufacturing
    • /
    • 제15권4호
    • /
    • pp.8-13
    • /
    • 2021
  • A plastic roller for opening and closing the safety door of the injection molding machine was molded. The dimensional change of the measurement position of the roller was studied when the cooling time was applied differently among the molding conditions, and when the temperature of the coolant applied for mold cooling was also applied differently. Cooling times of 300 seconds and 400 seconds, hot and low-temperature coolant were applied. When the low-temperature coolant was applied, the measuring point of the roller shrank by 0.03 mm. However, when the high-temperature coolant was applied, the measuring point shrank by 0.3 mm. It was found that the application of low-temperature coolant among coolants was more suitable for the reference dimension of the molded article compared to the application of high-temperature coolant. Among the cooling water applied for the molding of plastic rollers, when high-temperature coolant is applied, the shrinkage rate measured immediately after ejection was smaller than when low-temperature coolant is applied. However, it was found that post shrinkage, which occurs over time, occurs much larger when high-temperature coolant is applied.

플라스틱 f$\heta$렌즈의 복굴절이 결상빔경에 미치는 영향분석 (The effect analysis of birefringence of plastic f$\heta$ Iens on the beam diameter)

  • 임천석
    • 한국광학회지
    • /
    • 제11권2호
    • /
    • pp.73-79
    • /
    • 2000
  • 사출성형법으로 제조된 $fheta$렌즈를 주사렌즈로 상요하는 Laser Scanning Unit의 주주사 및 부주사 방향의 빔경을 측정했다. 주주사 빔경의 경우 $62muextrm{m}$~ $68\mu\textrm{m}$로써 설계치와 유사한 성능을 보이지만 부주사 빔경의 경우 $78\mu\textrm{m}$~$115\mu\textrm{m}$로써 꽤 큰 빔경편차( $37\mu\textrm{m}$)를 나타내었다. 사출성형렌즈에서는 냉각.고화시 수축에 의한 형상오차와 불균일 냉각에 의한 내부왜곡(복굴절)이 발생하게 되는데, 이는 결국 파면수차(빔경확대)를 발생시키게 되고 결국 레이저프린터의 화상열화로 나타나게 된다. 본 논문에서는 부주사 빔경편차의 주요인을 밝혀내기 위해 복굴절(편광비) 및 $f\theta$렌즈의 비구면 형상을 측정하였다. 그리고 측정된 비구면 형상치를 CODE-V(미국 ORA사의 광학설계 프로그램)에 입력하여 부주사 상면만곡을 계산하고, 이와 설계 초점심도를 비교.분석함으로써 복굴절이 부주사 빔경편차의 주요인임을 알 수 있었다.

  • PDF

셀룰로오스 기반 생분해성 고분자 복합재의 물성 증가에 관한 연구 (A Study on Increased Properties of Cellulose-Based Biodegradable Polymer Composites)

  • 홍상준;이아정;주상현;신영은;박태훈
    • Composites Research
    • /
    • 제36권2호
    • /
    • pp.126-131
    • /
    • 2023
  • 기존의 상용 플라스틱으로 인한 환경 오염에 대한 우려가 높아지면서 대체 재료로서 생분해성 고분자에 대한 연구가 주목을 받고 있다. 본 연구는 생분해성 열가소성 수지인 폴리 젖산에 유기 핵제의 도입으로 물성 강화 및 100% 생분해 가능한 나노복합재 개발을 목표로 한다. 그에 따라 무기 핵제의 대체재로 친환경 소재인 셀룰로오스 나노섬유를 채택하였다. 폴리 젖산 내 셀룰로오스 나노섬유의 균일한 분산을 위해 동결 건조 방식으로 나노화된 섬유 형상을 유지시켰으며, 이축압출기로 1차 교반을 진행하고, 사출 성형을 통해 이중 교반된 물성 시험용 시편을 제작하였다. 보강된 결정성을 확인하기 위해 시차주사 열량분석법을 사용하였고 1 wt%의 셀룰로오스 나노섬유가 보강재 및 핵제로서 작용하여 냉결정화온도가 약 14℃ 가량 감소하며, 결정화되는 정도 또한 증가한 것을 확인하였다. 본 연구는 기존 생분해성 고분자의 무기 핵제를 유기 나노소재로 대체함으로써 100% 생분해 가능한 친환경 나노복합재 개발하여 강화된 물성의 플라스틱 소재 개발을 위한 친환경적 대안을 제시한다.

고속운동 플라스틱 금형사출 부품 취출 로봇의 잔류진동 제어 (Residual Vibration Control of High Speed Take-out Robot Used for Handling of Injection Mold Plastic Part)

  • 임성수;박주한
    • 한국정밀공학회지
    • /
    • 제28권9호
    • /
    • pp.1025-1031
    • /
    • 2011
  • Take-out robots used for handling of the plastic parts manufactured with the injection mold are usually the gantry type that consists of long and thin links, The performance of the take-out robot is determined by the speed of the motion and the positioning accuracy to grab the part out of the mold, As the speed of the robot increases the flexure in the links of the take-out robot becomes more significant and it results in more residual vibration, The residual vibration deteriorates the positioning accuracy and compels the operator to slow down the motion of the robot. The typical method to reduce the vibration in the robot requires stiffening the links and/or slowing down the robot, Vibration control could achieve the desired performance without increasing the manufacturing cost or the operation cost that would be incurred otherwise, Considering the point-to-point nature of the task to be performed by the take-out robot the time-delay command (or input) shaping filter approach would be the most effective control method to be adopted among a few available control schemes. In this paper a direct adaptive command shaping filter (ACSF) algorithm has been modified and applied to design the optimal command shaping filters for various configuration of the take-out robot. Optimal filters designed by ACSF algorithm have been implemented on a take-out robot and the effectiveness of the designed filters in terms of vibration suppression has been verified for multiple positions of the robot.

트럭 Deck Floor Board의 강도향상을 위한 목분복합재의 기계적특성 분석 (Analysis of Mechanical Properties of Wood Flours Composites to Improve the Strength of Truck Deck Floor Boards)

  • 윤성우;고선호;김홍건;곽이구
    • 한국기계가공학회지
    • /
    • 제18권1호
    • /
    • pp.24-30
    • /
    • 2019
  • The deck floor of a the cargo truck becomesis damaged and aged due to the continuous loading of the loading cargo and external environmental factors. Floor boards made of wood and metal are often used. In the case of wood, the cost is high due to the use of imported wood, and the strength is easily deterioratesd due to environmental factors. In the case of metal materials, the durability is higher than that of wood, but problems are raised due to the effect of major factors that hinder the weight reduction, and the effects of corrosion. In order to replace this stucturestructural design, this study proposed a wood fiber composite using natural raw materials. Woody composites are being used as environmentally and friendly exterior materials with the combined advantages of plastic, and wood,; low cost and low density. However, due to the nature of the woody composites, the properties are differentdiffer depending on the contents of the matrix, reinforcing agent, additives, compatibilizer, etc. In this study, we investigate these problems through analysis of the microstructure and mechanical properties according to proper content and injection molding conditions. As a result, it is considered that the wood deck composite can replaced the current Deck Floor Boardreplace current deck floor boards through continuous continued research and results of this study.