• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.278-285
• /
• 1988

The Critical size of artificially induced micro-holes in 0.17%, 0.36% Carbon steel Specimens with Spheroidized Cementite and in 0.17% carbon steel specimens with martensite structure is compared with annealed pre-crack in order to discuss the physical meaning of the fatigue limit and evaluation of the tolerant micro flaw size at the stress level of the fatigue limit. Results obtained were summarized as follows; (1) In this study, non-propagating crack length of Smooth specimen and critical pre-crack length (lc) is coincide. (2) In the carbon steels with spheroidized cementite structure, critical pre-crack length (lc) and allowable micro-hole size (dc) is coincide each other at the fatigue limit level. (3) It has been published that there exists a particular size of micro-hole which has no effect on the fatigue limit. In this study, the micro-hole of critical size can be regarded as equivalent to a tolerant micro flaw which would not reduce the fatigue limit.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.169-169
• /
• 2016

크롬산 용액에 황산을 촉매로 하여 Sargent에 의해 개발된 크롬도금은 경도, 내식성, 내마모성 등의 특성이 우수하다. 이로 인해 장식용 박막 도금뿐만 아니라 경질의 후막 도금층을 형성이 가능함으로써 기계 부품류를 비롯한 산업 전반에 걸쳐 폭넓게 적용되고 있다. 이러한 크롬도금이 적용된 소재부품에 대해 장수명화와 더불어 가혹한 환경에서의 사용요구가 점차 증가하고 있으며, 이를 위해서는 보다 더 우수한 내식성과 기계적 물성을 확보해야할 필요성이 높다. 한편 경질 크롬 도금의 내식성과 관련해 도금 과정에서 발생하는 마이크로 크랙에 의해 제품의 내식성의 한계를 나타내게 된다. 본 연구에서는 내식성이 우수할 뿐만 아니라 표면 경도가 우수한 도금층을 얻기 위해 도금 전류 조건으로 펄스 전류를 적용하는 방안을 시도한 것으로 펄스전류를 적용하여 경질크롬도금 시 크랙 발생에 미치는 영향을 조사하였다. 도금욕은 일반적인 경질크롬도금에 사용되는 Sargent 욕을 이용하였고, duty ratio를 조절하여 전류 조건 변화에 따른 단면 내 크랙의 수 변화를 관찰하여 최적의 전류 조건을 도출하였다. 그리고 도출된 전류 조건을 이용해 도금 두께에 따른 크랙 수 변화를 관찰하였고, 이때의 경도를 측정하였다. 또한 XRD 분석을 통해 도금 전류 조건 및 시간 변화에 따른 결정구조 변화를 확인하였다. 실험결과 펄스 전류를 적용하는 경우, 기존 직류 적용 시에 비해 크랙 발생을 현저하게 감소시킬 수 있었으며, 사실상 크랙프리(Crack free) 도금이 가능하였다. 또한 크랙의 감소와 함께 경도 저하가 나타나게 되나 펄스 전류 인자의 최적화에 따라 이러한 경도 저하 현상의 최소화가 가능하였다.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.611-619
• /
• 1995

PAN계 탄소섬유와 페놀수지를 이용하여 rod를 인발성형 한 후, 다른 섬유분율을 갖는 두종류의 hexagonal type 4D 프리폼을 제작하였다. 석탄계 핏치를 가압함침 탄화공정을 통하여 함침한 후 탄화와 고온열처리를 하였다. 이와 같은 공정을 반복하여 고밀도화된 4D CRFC를 제조하였다. 열충결 시험 후 새로운 크랙이 생성되었을 뿐만 아니라 기존의 크랙이 확장되었으며 이와 같은 크랙들은 공기와의 접촉면을 제공하여 중량감소를 보였다. 공기 산화 저항성을 고온열처리 공정을 거친 것이 약 20% 우수하게 나타났다. 4D CFRC의 밀도와 섬유의 분율이 높을 수록 삭마 저항성이 커지고, 삭마량은 시간에 따라 선형적으로 증가하였으며 type II가 type I보다 삭마저항성이 우수하였다. 삭마 메카니즘을 관찰한 결과 1차적으 기질의탈리가 먼저 일어난 다음 섬유가 삭마되었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.328-336
• /
• 2004

This paper describes the effect of loading rate, specimen geometries and material properties for ModeⅠ and Mode Ⅱ interlaminar fracture toughness of hybrid composite by using double cantilever beam (DCB) and end notched flexure (ENF) specimen. In the range of loading rate 0.2~20mm/min, there is found to be no significant effect of loading rate with the value of critical energy release rate (Gc).The value of Gc for variation of initial crack length are nearly similar values when material properties are CF/CF and GF/GF, however, the value of Gc are highest with the increasing intial crack length at CF/GF. The SEM photographs show good fiber distribution and interfacial bonding of hybrid composites when the moulding is the CF/GF.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.262-268
• /
• 2003

This paper describes the effect of loading rate, specimen geometries and material properties for Mode I interlaminar fracture toughness of hybrid composite by using double cantilever beam (DCB) specimen. In the range of loading rate 0.2-20mm/min, there is found to be no significant effect of loading rate with the value of critical energy release rate (G_IC). The value of $G_IC$ for variation of initial crack length are nearly similar values when material properties are CF/CF and GF/GF, however, the value of $G_IC/$ are highest with the increasing initial crack length at CF/GF. The SEM photographs show good fiber distribution and interfacial bonding of hybrid composites when the moulding is the CF/GF

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.40-50
• /
• 2023

Recently, the number of components of smartphones increases rapidly, while the PCB size continuously decreases. Therefore, 3D technology with a stacked PCB has been developed to improve component density in smartphone. For the s tacked PCB, it i s very important to obtain solder bonding quality between PCBs. We investigated the effects of the properties, thickness, and number of layers of interposer PCB and sub PCB on warpage of PCB through experimental and numerical analysis to improve the reliability of the stacked PCB. The warpage of the interposer PCB decreased as the thermal expansion coefficient (CTE) of the prepreg decreased, and decreased as the glass transition temperature (Tg) increased. However, if temperature is 240℃ or higher, the reduction of warpage is not large. As FR-5 was applied, the warpage decreased more compared to FR-4, and the higher the number and thickness of the prepreg, the lower the warpage. For sub PCB, the CTE was more important for warpage than Tg of the prepreg, and increase in prepreg thickness was more effective in reducing the warpage. The shear tests indicated that the dummy pad design increased bonding strength. The tumble tests indicated that crack occurrence rate was greatly reduced with the dummy pad.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1335-1342
• /
• 1988

In this paper, mechanical properties of mild steel plate which was pretreated by prestress and prestrain loading conditions were studied. The variation of the mechanical properties of the test materials is evaluated in the light of Taylor's work hardening theory. Through this experimental study, it is recognized that material showed unstable phenomena after cyclic loading and it will recover its stability after a certain period of time accompaning the increment of hardness and the yield strength of the material. Also, the strength of smooth specimen, the notch strength of notch specimen and propagation behavior of fatigue specimen which were subjected to prestress and prestrain reveal that the optimal conditions may occur in the first, the middle and the later half of stage II of Taylor's work hardening theory, respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.20-30
• /
• 2001

This study represents the Nondestructive Test about impact damage of composite materials made by different lay-up patterns and degrees. For this study, they were examined by the drop test on composite materials of two type lap-up patterns with fabric and unidirectional prepreg and examined nondestructive test of those. Nondestructive methods were X-ray test with $ZnI_2$ penetrant and Ultrasonic C-scan. The defect detectability of X-ray and Ultrasonic test was compared according to defect species. And the amounts of damage on impacted zone wert compared according to impact energy on two type test specimens. At results, Ultrasonic test was more effective to detect delamination and Penetrant X-ray test was more effective to detect matrix crack and fiber fracture. There were some differences in defect shapes and grades according to lay-up patterns and degrees, and the trend appeared that matrix crack, delamination, fiber fracture occured and increasing defects sizes according to increasing impact energy.

• Journal of Convergence Society for SMB
• /
• v.5 no.3
• /
• pp.21-26
• /
• 2015

As mobile contents grow up, In App Billing is brisk at applications including mobile contents. But some of users don't pay and use charged content for free to use cheating payment module or hacking through applications. Call this bypass payment. Applications, helping bypass, are Freedom, IAP Cracker, and DNS server suggested by the hacker named Borodin. In case of mobile game, Despite sell a lot of charged content but income is different revenue in sales log with real profits. Because of users using bypass payment application. Management plan to bypass payment are checking OrderID, encrypting public key and verifying receipt.