• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.1058-1068
• /
• 2011

Video FRUC (Frame Rate Up Conversion) is one of the main issues that have arisen in recent years with the explosive growth of video sources and display formats in consumer electronics. Most advanced FRUC algorithms adopt an efficient motion interpolation technique to determine the motion vector field of interpolated frames. But, in some application areas such as post processing in receiver side, it is necessary to evaluate how well the MCI (Motion Compensated Interpolation) frame was reconstructed. In order to achieve this aim, first, this paper introduces some cost functions to estimate the reliability of a block in the MCI frame. Then, by using these functions, this paper proposes two distortion estimation models for evaluating how much noise was produced in the MCI frame. Through computer simulations, it is shown that the proposed estimation methods perform effectively in estimating the noises of the MCI frame.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.560-574
• /
• 2010

Recently, many people can easily contact video telephony service through the mobile terminal owing to the commercialization of 3G communication technology. However, the quality of the serviced video telephony has been not good yet by the actual mobile restrictions. For solving quality problems, this paper presents the design of the object-based video CODEC using hybrid transform in mobile video telephony. The proposed design firstly segment each frame into a significant object and an insignificant object. The proposed design is to improve the quality of a significant object by limiting the bit rate of a insignificant object. Thus, we compress a significant object with high quality and low compression ratio and compress an insignificant object with low quality and high compression ratio. Furthermore, we control the bit rate of the video stream in the limited bandwidth by adjusting the compression ratio of each object. From experimental results, we confirmed that our method has more higher quality than methods in the conventional CODECs at the significant region on the same bit rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.595-604
• /
• 2013

Currently, registered number of imported vehicles is increasing rapidly over the years. Accordingly, environment improvements of vehicle maintenance company for maintenance of luxury vehicle such as imported vehicle are continuously being made. In this paper, we propose a key frame extraction method based on HSV color model for smart vehicle management system implementation to offer for customer reliability of maintenance vehicle. After automatically recognize the license plates of the vehicle using vehicle license plate recognition system when the vehicle come in the car center, we check the repair history and request of the vehicle based on it. We implement mobile services which provide extracted key frame images to the user after extract key frames from vehicle repair video. In addition, we verify the superiority of key frame extraction method by applying a smart vehicle management system. Finally, we convert the RGB color to HSV color to improve the performance of proposed key frame extraction scheme. As a result, we confirmed that our scheme is more excellence about 30% in terms of recall than RGB color model from the performance evaluations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.269-277
• /
• 2007

In this paper, we present a efficient transcoding method from MPEG-2 to H.264. The proposed transcoder is the transcoding method for spatial domain which consists of MPEG-2 decoder part and H.264 encoding part. In transcoder, we can get useful information to estimate less probable modes from MPEG-2 decoder. Using this information, H.264 encoder chooses the macroblock mode of I-frame and P-frame adaptively to reduce the whole complexity of the transcoder. Our experimental result shows that the proposed algorithm can archive about $30\sim60%$ computational saving without significant degradation of visual quality and increasing of bit rate.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2006

Human tracking is a requirement for the advanced human-computer interface (HCI), This paper proposes a method which uses a component-based human model, detects body parts, estimates human postures, and animates an avatar, Each body part consists of color, connection, and location information and it matches to a corresponding component of the human model. For human tracking, the 2D information of human posture is used for body tracking by computing similarities between frames, The depth information is decided by a relative location between components and is transferred to a moving direction to build a 2-1/2D human model. While each body part is modelled by posture and directions, the corresponding component of a 3D avatar is rotated in 3D using the information transferred from the human model. We achieved 90% tracking rate of a test video containing a variety of postures and the rate increased as the proposed system processed more frames.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.81-84
• /
• 2008

최근 센서네트워크와 같은 에너지 제한 환경을 위한 경량화 부호화 기술의 필요성이 대두됨에 따라 분산 소스 부호화 기술(Distributed Source Coding)의 응용기술로 비디오 부호화 복잡도의 대부분을 차지하는 움직임 예측/보상과정을 부호화기가 아닌 복호화기에서 수행하는 분산 비디오 부호화 기술(Distributed Video Coding)에 대한 연구가 활발히 이루어져 왔다. 이에 가장 대표적인 기술인 Wyner-Ziv 코딩 기술은 채널 코드를 이용하여 원본 프레임과 이에 대한 복호화기의 예측영상인 보조정보 사이의 잡음을 제거하여 영상을 복원한다. 일반적으로 보조정보는 원본영상에 유사한 키 프레임간의 프레임 보간을 통하여 생성되며 채널 코드는 Shannon limit에 근접한 성능을 보이는 Turbo 코드나 LDPC 코드가 사용된다. 이와 같은 채널 코드의 복호화는 채널 잡음 모델에 기반하여 수행되어지며 Wyner-Ziv 코딩 기술에서는 이 채널 잡음 모델을 '상관 잡음 모델' (Correlation Noise Modeling)이라 하고 일반적으로 Laplacian이나 Gaussian으로 모델화 한다. 하지만 복호화기에는 원본 영상에 대한 정보가 없기 때문에 정확한 상관 잡음 모델을 알 수 없으며 잡음 모델에 대한 예측의 부정확성은 잡음 제거를 위한 패리티 비트의 증가를 야기해 부호화 기술의 압축 성능 저하를 가져온다. 이에 본 논문은 원본 프레임과 보조정보 사이의 잡음을 정확하게 예측하여 잡음을 정정할 수 있는 향상된 상관 잡음 모델을 제안한다. 제안 방법은 잘못된 잡음 예측에 의해 Laplacian 계수가 너무 커지는 것을 방지하면서 영상내의 잡음의 유무에 별다른 영향을 받지 않는 새로운 문턱값을 사용한다. 다양한 영상에 대한 제안 방법의 실험 결과는 평균적으로 약 0.35dB에 해당하는 율-왜곡 성능 향상을 보여주었다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.717-726
• /
• 2003

This paper presents the methods that design the Wavelet-based pitch detector for 2,4 kbps Harmonic-CELP Coder, and that achieve the effective waveform interpolation by decision window shape of the transition region, Waveform interpolation coder operates by encoding one pitch-period-sized segment, a prototype segment, of speech for each frame, generate the smooth waveform interpolation between the prototype segments for voiced frame, But, harmonic synthesis of the prototype waveforms between previous frame and current frame occur not only waveform errors but also discontinuity at frame boundary on that case of pitch halving or doubling, In addtion, in transition region since waveform interpolation coder synthesizes the excitation waveform by using overlap-add with triangularity window, therefore, Harmonic-CELP fail to model the instantaneous increasing speech and synthesis waveform linearly increases, First of all, in order to detect the precise pitch period, we use the hybrid 1st pitch detector, and increse the precision by using 2nd ACF-pitch detector, Next, in order to modify excitation window, we detect the onset, offset of frame by GCI, As the result, pitch doubling is removed and pitch error rate is decreased 5.4% in comparison with ACF, and is decreased 2,66% in comparison with wavelet detector, MOS test improve 0.13 at transition region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.85-91
• /
• 2015

This paper presents a novel frame rate up-conversion (FRUC) algorithm. Existing algorithms, in general, employ rectangular blocks for motion estimation and arbitrary shape of an actual object region cannot be precisely represented. On the other hand, the proposed wedge-shaped block partitioning algorithm partitions a rectangular block into two wedge-shaped blocks using the texture information, which makes better approximation for an actual object region. The wedge-shaped block partitioning algorithm as well as the adaptive motion vector prediction algorithm is used to reliably estimate the actual motion. Experimental results show that the proposed FRUC algorithm is superior to existing algorithms up to 1.988dB in PSNR and 0.0167 in SSIM comparisons.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.64-77
• /
• 2013

In this paper, we propose a joint bandwidth allocation and path selection scheme for IEEE 802.16j networks in uplink with cooperative relaying, and we evaluate the performance of the proposed scheme by using OPNET based simulation in hilly terrain with heavy tree density. The proposed scheme maximizes the system throughput in uplink with cooperative relaying in IEEE 802.16j networks. Then, we transform the proposed scheme into multi-dimensional multiple choice knapsack problem (MMKP) based scheme. We also propose uplink throughput maximization scheme and MMKP based scheme without cooperative relaying. We show that the system throughput of the proposed MMKP based scheme is higher than that of link quality based scheme, and cooperative relaying provides higher system throughput than the conventional case without cooperative relaying in uplink.