• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1086-1088
• /
• 2010

본 연구는 지하 구조물의 내벽에서 발생하는 습윤(濕潤) 및 결로를 방지하는 내벽체에 관한 것으로, 사방으로 연결조립 가능한 벽체판넬의 한쪽을 수직 지지프레임에 끼움 조립한 상태에서 타카핀으로 벽체판넬 및 수직 지지프레임을 동시 관통하여 내벽에 고정한 후 상기 수직프레임에 다른 벽체판넬의 일측을 중첩되게 조립하는 방법으로 지하 구조물에 내벽체를 편리하게 시공할 뿐만 아니라 공기를 단축하며, 상기 내벽체의 구성부품이 매우 간소하면서 가격이 저렴하여 공사비를 대폭 절감할 수 있는 시공이 편리한 지하 구조물용 내벽체의 개발에 관한 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.274-274
• /
• 2004

조향성능은 완성된 자동차를 평가하는 아주 중요한 요소이며, 운전자에게 직접적인 영향을 가지는 까닭으로 우선적으로 해결되어야 할 문제이다. 자동차의 조향성능과 관련된 자동차 요소로는 프런트 샤시 모듈이 있으며, 프런트 샤시 모듈의 자세는 구성 요소인 서브프레임의 조립자세에 의하여 결정된다. 서브프레임은 4개의 원통형 지지부로 이루어져 있으며, 차체와의 조립시 지지부에 물리적 접촉이 발생한다. 즉 공간상에서 서브프레임의 자세는 지지부의 조립위치에 의하여 결정이 되며, 서브프레임의 자세를 결정하기 위해서는 지지부에 대한 적절한 해석이 필요하다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3654-3657
• /
• 2010

This paper studies the assembly process of LCD display frames to reduce product cost. First of all, OTRS and time study methodology were performed to analyze the efficiency of the assembly process. Next, various types of frame materials are evaluated whether they pass the reliability criteria or not. As a result, it is found that the productivity of LCD display assembly process maintains prefer level and some frame materials have an opportunity to reach the reliability criteria.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.437-439
• /
• 1998

최근 들어 소프트웨어 개발에 컴포넌트 기술을 적용하려는 수요는 많이 있지만 범용적으로 사용 가능하며, 소프트웨어의 전 생명 주기를 효과적으로 지원하는 컴포넌트 프레임워크 모델은 제시되고 있지 못하다. 본 논문에서는 기본 컴포넌트의 생성, 컴포넌트들을 조립한 복합 컴포넌트의 생성, 그리고 이미 조립된 복합 컴포넌트의 일부분을 교체하는 기능을 포함한 컴포넌트 프레임워크 모델을 제시함으로써, 소프트웨어-IC의 개념에 더 근접하며, 소프트웨어의 개발뿐만 아니라 유지보수, 수정, 확장까지 용이한 컴포넌트 모델을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.857-858
• /
• 2009

최근의 소프트웨어 개발에서는 리팩토링이 일반적인 요소로서 활발하게 이용되고 있다. 리팩토링에 대한 관심이 높아지면서 리팩토링의 자동화와 리팩토링 재사용을 위한 조립에 대한 연구가 많이 진행되고 있다. 기존의 연구들에서는 리팩토링과 리팩토링 조립에 대해 선/후행조건을 각각 명세하고 있다. 하지만 리팩토링 조립의 경우에 대한 선/후행조건은 개별적인 리팩토링들의 선/후행조건들과 중복된 기능들이 대부분이며, 사용 가능한 리팩토링의 조립이 정적으로 고정되어 있음을 의미한다. 이에 본 연구에서는 리팩토링 조립의 경우가 고정되어 있지 않고 조립의 경우에 따른 선/후행조건의 추가적인 정의 없이 동적으로 다양하게 조립여부를 확인할 수 있도록 하고자 한다. 이를 위해 리팩토링의 동적 조립을 위한 전체 프레임워크를 제안하며 OCL 기반으로 리팩토링을 명세한다.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.139-148
• /
• 2006

In the collaborative product design environment, the communication between designers is important to capture design intents and to share a common view among the different but semantically similar terms. The Semantic Web supports integrated and uniform access to information sources and services as well as intelligent applications by the explicit representation of the semantics buried in ontology. Ontologies provide a source of shared and precisely defined terms that can be used to describe web resources and improve their accessibility to automated processes. Therefore, employing ontologies on assembly modeling makes assembly knowledge accurate and machine interpretable. In this paper, we propose a framework of semantic assembly modeling using ontologies to share design information. An assembly modeling ontology plays as a formal, explicit specification of a shared conceptualization of assembly design modeling. In this paper, implicit assembly constraints are explicitly represented using OWL (Web Ontology Language) and SWRL (Semantic Web Rule Language). The assembly ontology also captures design rationale including joint intent and spatial relationships.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.30-39
• /
• 1999

In this paper, the size of IWU frame cell buffer is analyzed that receives FR frame cells from other FR networks through ATM backbone network. The frame cell buffer receives multiplexed ATM cells from other IWUs that provide interworking with ATM network for other FR networks A receiving IWU reassembles frames from multiplexed ATM cells by identifying the VPI/VCIs. The reassembled frames are transmitted on FR network links according to their destination. Therefore, IWU needs sufficient amount of buffers for the assembly of the frames and for providing the assembled frames with the queue to wait until the frame is transmitted by FR network link. In this paper, the probability of frame loss at the frame cell buffer is derived in terms of traffic parameters, the number of multiplexed FR connections, the number of FR links and the transmission capacity. By applying the derived results, we analyzed the required buffer size for a given probability of frame loss. Also, it is presented that how the probability and the required size are effected by the number of multiplexed FR connections and FR transmission links.

• Journal of KIISE:Software and Applications
• /
• v.31 no.1
• /
• pp.43-53
• /
• 2004

Component-based development(CBD) has acquired a substantial acceptance in both academia and industry as an effective inter-organizational reuse technology. A component framework in product line engineering(PLE) which consists of related components, connectors and their semantics has a greater potential for reusability than components. In frameworks, components are glued with association, dependency and connections. Problems occur like affecting the implementation code of components when they are glued and replaced because the association and dependency relationships between COTS components which are acquired for application development do not match exactly. Especially, a connector may not only connect related components, but also mate partially-matched COTS components fit together. However, little has been studied to date about connectors that can be used practically. In this paper, we present a meta-model for connectors and show how a connector can be designed and implemented in practice. We propose five main patterns of connectors. Proposed major patterns Provide design guidelines for practical and efficient connector configuration based on component framework. And also, applying techniques and applied case studies of the major patterns show greatly increased applicability and reusability of the component without component modification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• Journal of KIISE:Software and Applications
• /
• v.34 no.12
• /
• pp.1011-1020
• /
• 2007

It is difficult to assemble independently developed software components because of discrepancies between their interfaces. In order to resolve such problem, we propose a new component model, Active Binding Technology, in which each component has its own independently-defined interface for service request that is revealed in its metadata, instead of passively following the interface of a service-providing component. This model Includes the use of the glue component, an interface mediating place, whose template code is automatically generated by reading in the metadata of the components to be combined. We also propose a runtime framework that holds the pool of component instances, completes the assembly of components in the manner of dependency injection, and performs middleware services and real-time system monitoring through glue components. In order to test the practical value of Active Binding Technology, we have made a tool, which supports the development and assembly of Active Binding components.