• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.921-926
• /
• 2015

Embossed aluminum sheets were been used in heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement. However, there are many restrictions because of high rate of wrinkle occurrence on press working. We have performed the tensile and bending tests for embossed sheets to clarity its mechanical properties and springback characteristics. Embossed aluminum sheets showed a different flow stress after plastic yielding due to flattening the embossed cone shape. Above all, yield stress of parallel embossed specimen decreases while its diagonal one increases and the decrease of young's modulus in the embossed sheets contributes to the increase of springback amount.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.1-9
• /
• 2006

분말야금제품의 $90\%$를 점하는 소결기계부품의 기술동향에 대해서 주요한 재료기술과 제조기술에 초점을 두고, 고강도 혹은 고정도라고 하는 시장의 요구에 대응한 신소결재료의 개발 및 고밀도 혹은 복잡형상에 대응하는 온간성형이나 확산접합등에 관한 제조기술에 대해서 개설했다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.412-419
• /
• 2003

The most product is manufactured by mould in usual life. From drawing to manufacturing is to be automatically. But inspection is handwork usually. An alternative idea of this problem is reverse engineering. In this study, press forming is measured by 3D non-contact coordinate measuring machine and problem will be analyzed by comparing with 3D data Through the study, it will achieve improvement of press mould process.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.345-352
• /
• 1995

Warm deep drawing for optimum forming conditions to give the maximum drawing depth is investigated and compared with the results from experiments performed at room temperature. Experiments which draw square cups of STS 304 stainless steel sheet under the constant lubrication condition of teflon film are made both in a crank and hydraulic press for two kinds of specimens. The maximum drawing depth at warm forming condition reaches 1.4 times the drawing depth at room temperature in a crank press, whereas 1.6 times in a hydraulic press, and also more uniform distribution of thickness in case of warm deep drawn cup is observed. The effects of other factors on formability, such as forming temperature, speed of press and cooling of punch are examined and discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.15-18
• /
• 2011

Up to now the incomplete texture have been manufactured through the 2D surface treatment like simple painting process or printing process. But in order to obtain 3D texture like natural object, micro scales' 3D surface structure on the surface of plastic part must be formed. In this study plastic smart phone case with 3D texture was produced by developing the surface duplication technology of natural object used electro-forming technology, by developing the press forming technology converted plane stamper to curved surface stamper and by developing the injection mold and molding technology which have been installed the curved surface stamper.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.166-166
• /
• 2011

연료전지 핵심 부품 가운데 하나인 분리판(Bipolar plate)는 막전극체(MEA), 기체확산층(GDL)과 함께 발생한 전류의 수집 및 전달, 반응 가스의 수송, 반응/생성물의 수송 및 제거, 반응열 제거 등을 위한 냉각수 전달 등의 다양한 역할을 담당한다. 이러한 역할을 위하여 분리판은 우수한 전기전도성, 열전도성, 화학적 안정성이 요구되어 진다. 기존의 연료전지용 분리판은 흑연계 소재 및 수지와 흑연을 혼합한 복합 흑연 재료를 통해 제조하여 요구 되어지는 물성을 만족시켜 왔으나 흑연계 분리판의 경우 강도 및 가스 밀폐성 측면에서 낮은 특성을 보이며 특히 고가의 제조 공정 비용과 낮은 양산성으로 인하여 자동차 연료전지 상용화에 수많은 해결 과제를 안고 있었다. 흑연계 분리판의 이러한 문제점을 대체하기 위한 연구로 최근 금속계 분리판의 적용 및 개발이 활발하게 진행되고 있다. 특히 금속계 분리판은 양산 제조 공정이 적용 가능하여 대량생산이 가능하며 자동차 연료전지 스택의 경량화 및 박판화가 가능하다는 장점을 가지고 있다. 그러나, 박판의 스테인리스강을 소재로 적용한 금속분리판의 양산을 위하여 반드시 선행되어야 할 연구가 바로 금형 코팅 연구이다. 일반 자동차 생산 금형을 평균 약 50만타로 예측한다면 연료전지 금속계 분리판 성형 금형의 현재 수명은 약 10만타로 추정 가능하다. 이러한 원인은 고하중의 프레스 사용과 정밀 금형으로 인한 극한 공정 조건으로 야기된 결과이며 문제 해결을 위하여 성형 금형에 PVD 코팅 적용 연구를 진행하였다. 성형 금형의 PVD 코팅 적용을 통하여 금형 교체 주기 감소를 통한 생산 원가 절감 및 이형성 개선을 통한 성형성 확보를 목표로 본 연구를 진행하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1119-1128
• /
• 1990

A numerical method for analyzing non-isothermal, rigid-viscoplastic deformation problems has been presented. As an application, a stretch forming of sheet metals, including temperature effect, has been analyzed by a three-dimensional finite element method. Bishop`s step-wise decoupled method is adopted to solve thermomechanical coupling between deformation and heat transfer. Using the method, the effect of temperature on strain distribution during stretch forming is investigated. By comparison of the non-isothermal results with isothermal analysis, the importance of including temperature effects in the analysis of metal forming problems is emphasized. The predicted results were in good agreement with the existing experimental measurements at the different punch temperatures and dome heights investigated. It is also found that any increase of the punch temperature appeared to postpone the strain localization process by lowering the peak strain in the critical punch-sheet contact region and by normalizing strain distribution within the specimen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.25-31
• /
• 2018

Recently, research on the development of lightweight vehicle bodies is increasing continuously as a response to fuel economy regulations. To reduce the weight of a vehicle body, a conventional steel plate has been substituted by light weight material with high specific strength and the jointing of multi-materials is generally applied. On the other hand, the customer's demand for safety and emotional quality in NVH (Noise, Vibration and Harshness) is becoming increasingly important. Therefore, a light weight with proper strength and NVH quality is needed. In the view of light weighting and NVH quality, the application of a vibration proof steel plate can be an effective solution but the formability of a sandwich panel is different with a conventional steel sheet. Therefore, careful analysis of formability is required. This study aims to characterize the formability of a sandwich high-strength steel plate. The high-strength steel plates of different thicknesses with resistance spot welding and sealer bonding were analyzed using forming limits diagram through a cup drawing test.

• Composites Research
• /
• v.34 no.5
• /
• pp.269-276
• /
• 2021

PCM (Prepreg Compression Molding) process is a high-speed molding technology that can manufacture high-quality CFRP (Carbon Fiber Reinforced Plastic) parts. Compared to the autoclave process, it generates less waste and can significantly reduce cycle time, so various studies are being conducted in the aerospace and automobile industries. In this study, in order to improve the quality of the PCM process, a molding method was developed to increase the compression pressure of the press step by step according to the curing behavior of the prepreg. It was confirmed that this multi-stage compression molding technology is a good means to produce high-quality CFRP products and shorten cycle times. And, the laminated prepreg at room temperature was immediately put into the mold and preheated and molded at the same time, so that it could be molded without a separate preheating process. In addition, as a result of applying the same process conditions optimized for flat plate molding to three-dimensional shapes, a product similar to a flat plate in appearance could be made without the process of establishing process conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.