• 한국광학회지
• /
• 제31권6호
• /
• pp.290-294
• /
• 2020

본 논문에서는 타일형 결맞음 빔 결합 시스템에서 렌즈의 수차가 빔 결합 효율 저하에 미치는 영향을 정량적으로 분석하였다. 렌즈의 수차를 정량화하기 위하여 Zernike 다항식 방법을 사용하고, 프레넬 회절을 적용하여 빔 결합 상황에서 첨두강도의 변화를 수치적으로 시뮬레이션하였다. 본 논문의 결과는 향후, 실제 상황에서 주어진 렌즈의 수차에 의해 저하되는 빔 결합 효율에 대한 정량적인 예측과 또한, 실제 타일형 결맞음 빔 결합 시스템의 최적 설계에 유용하게 활용될 수 있을 것으로 기대된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.79-82
• /
• 2005

Fresnel lens has number of applications in the optical systems because of its advantages. It is nearly flat lens that has small weight. It is conventionally used in lighthouse beacons, condensing unit of overhead projector and etc. Recently, demands of small size optical systems such as display units, information storage systems, optical detecting units had increased. Conventional manufacturing process of high quality Fresnel lens is direct machining. But it is not suitable for mass production because of high cost and long cycle time. Replication process is more suitable for mass production. But the Fresnel lens has number of sharp blade shape prism. In the replication process, this blade shape causes defects that can affect optical efficiency. In this study, replication process of blade shape pattern that has maximum height of $280{\mu}m$, aspect ratio 1.4 for Fresnel lens application.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.27-33
• /
• 2011

HCPV(High Concentrated PV) systems have well known for CPV market all over the world. Low concentration type silicon based modules have been introduced in the market. But low cost of standard flat silicon modules made them useless nowadays. High cost of compound semiconductor solar cell reduced cost effective cpv module production than that of recently silicon solar cell. In order to overcome increasing cost of CPV module, we study middle concentration type fresnel lens simulation using concentrated type silicon based solar cell. Linear type fresnel lens made production of CPV module without secondary optics such as light pipe or light tunnel. This type of fresnel lens design makes more cost effective solution for cpv niche market.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.28-34
• /
• 1997

The side burrs and shape distortion resulting from the micromachining of an array of V-shape microgrooves in fresnel lens mould were experimentally invesigated. The focus of this study is on the influence of depth of cut and prism angle on the burr growing rate. The main experiments were con- ducted on the single prism cutting for the convinient of measuring the burr shape and cutting force. From the observation of the burr shape and burr growing rate, it was found that there exits a critical depth of cut below which the burrs are more or less irregular and weak. But above that critical value, the burrs are re- latively clear and stiff.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.315-316
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.567-568
• /
• 2013

• 광학세계
• /
• 통권172호
• /
• pp.49-51
• /
• 2017

• 광학세계
• /
• 통권123호
• /
• pp.22-25
• /
• 2009

III-V족 화합물반도체 태양전지중 다접합 구조 태양전지와 집광형 태양전지는 제 3세대 태양전지로서 주목받고 있다. 현재 가장 간단하고 저렴한 원가를 갖는 구조가 프레넬 렌즈 1장을 사용한 구조로서 현재의 광학시설과 인프라만으로도 많은 부분을 개선할 수 있을 것이라 확신한다. 렌즈를 활용하여 집광한 빛을 한곳으로 모으로 이를 셀에 균일한 강도로 손실 없이 전송하기 위한 기하광학적 설계기술이 필요하며 이러한 설계와 조명설계를 결합하여 광시스템을 구축하는 것이 무엇보다 중요하다. 현재 나라마다의 다양하고 적극적인 개발노력으로 인하여 수년 안에 기존보다도 훨씬 효율성 높고 실용적인 태양집광시스템이 개발되리라 기대한다.

• 한국태양에너지학회 논문집
• /
• 제37권1호
• /
• pp.39-45
• /
• 2017

This paper presents the effect of solar collectors on the performance of solar tracking daylighting systems. A series of measurements were made for two different types of solar collectors mounted on double axis solar trackers: Parabolic dish concentrator and Fresnel Lens. Indoor light levels were measured at different locations of an office space (longitude: 126.33 E, latitude 33.45 N) as photo sensors were placed on a task plane 80 cm above the floor. To accurately monitor the applicability of the systems, measurements were performed under clear and overcast sky conditions with the roll-screen (on the south window) in the down position. Comparing the illuminance data, the system with Fresnel lens outperformed that of parabolic dish concentrator. On clear days, the former delivered the light levels of 400~600 lux on the task plane whereas the latter recorded 100~200 lux. Depending on the amount of cloud cover, on overcast days, illuminance readings fluctuated to some extent.

• 한국정밀공학회지
• /
• 제30권2호
• /
• pp.143-147
• /
• 2013

We present results of the optical design and fabrication of a light-guiding plate (LGP) for a photobioreactor by using sunlight and a linear Fresnel lens. LGP patterns were designed by optical simulations with an illumination design tool, LightTools, and fabricated by using a computerized numerical control machine. Optical characteristics of average deviation of illuminance distribution and light throughput efficiency were measured and compared with simulation results.