• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.573-580
• /
• 2010

In this study, an assessment method that considers the effects of directional wind speeds on buildings or structures that are sensitive to wind is proposed. Also, the basic characteristics of directional wind speeds were assessed by means of local annual maximum wind speeds. From the method of assessment of the characteristics of directional wind speeds, their goodness-of-fit was verified by applying extreme value distribution to the data on annual maximum wind speeds from the Korea Meteorological Administration. To consider the characteristics of directional winds, an assessment method is suggested that divides the directional wind pattern of each directional wind speed into four groups. From the study results, all the data on directional wind speeds based on the Gumbel distribution were examined using data on annual maximum wind speeds from Seoul, Tongyung, and Incheon. Since the Gumbel model of all directional wind speeds has independent probability characteristics that govern the 4 directional wind pattern groups, the application ratio proposed was based on the assessment of these four groups. According to the goodness-of-fit of the data on the annual maximum wind speeds based on the Gumbel distribution, new application ratios were proposed that consider the directional wind speeds in Seoul, Tongyung, and Incheon.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.472-473
• /
• 2008

최근 전력 공급의 안정성을 위해 송전선로에 각종 센서를 볼형태(볼센서)로 장착하여 철탑 및 송전선의 위험 상태를 실시간으로 모니터링해야 하는 필요성이 증대되고 있는데, 본 연구에서는 볼센서의 장착 특성으로 인해 구 표면에 3차원 풍향풍속센서 1개로 3차원 풍향풍 속이 측정 불가능한 문제점을 해결하고자, 2개의 2차원 풍향풍속센서의 측정 데이터를 이용하여 3차원 풍향풍속을 산출하는 방안에 대해 기술하였다. 구 표면을 따르는 풍속 및 풍압 유동해석 결과를 바탕으로, 먼저 구 표면을 따르는 2개의 풍향벡터를 통해 실제 풍향을 산출하고, 실제 풍향에 상대적인 센서 위치에 따른 해석결과에 기준해 보정처리를 함으로써 실제 풍속을 산출하는 방안에 대한 연구를 수행하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.685-691
• /
• 2013

A load-cell-type anemovane operates based on wind vector properties. The developed load-cell-type anemovane is of a fixed type in which the wing does not rotate, unlike in the case of existing anemovanes. The load-cell-type anemovane is required to accurately derive the correlation between the load ratio and the wind direction in order to develop a qualified product. This is because the load ratio repeats every $90^{\circ}$ owing to the use of four load cells, and its value varies nonlinearly according to the wind direction. In this study, we compared analytical results with experimental results. Fluid analysis was carried out using ANSYS CFX. Furthermore, the prototype was tested using a self-manufactured wind tunnel. The wind direction was selected as the design variable. 13 selected wind direction conditions ranging from $0^{\circ}$ to $90^{\circ}$ with an interval of $7.5^{\circ}$ for analysis were defined. Furthermore, 10 wind direction conditions with an interval of $10^{\circ}$ for the experiment were defined. We derived the relations between the pressure ratio and the wind direction through the experiment and fluid analysis.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.357-361
• /
• 2012

Anemometer is a meteorological instrument that measures wind direction and wind speed in real time, and is mounted to the cranes that are used at ports, shipbuilding yards, off-shore structure, or construction sites that are influenced by wind, and it is used in conjunction with the safety system. Load cell-type anemometer measures the wind direction through the ratio of load between 4 positions by mounting the thin plate to 4 load cells, and measures wind velocity through the summation of loads. In this study, we compared and analyzed the results in the theoretic approach, analytic approach and experimental approach to derive the correlation between load ratio and wind direction. Wind direction was selected as the design variable, and selected 9 wind direction conditions from $0^{\circ}{\sim}90^{\circ}$ with $11.25^{\circ}$ space for analysis, and 10 wind direction conditions with $10^{\circ}$ space for experiment.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1468-1469
• /
• 2008

기상관측 분야에서는 풍속센서의 소형화 요구가 커지고 있어 Air flow sensor를 이용한 MEMS(Micro Electro Mechanical System) 풍향 풍속센서의 응용연구가 활발하다. MEMS 풍향 풍속 센서는 수 mm 크기를 가지면서도 바람의 세기와 함께 방향을 측정하여야 하는데, 센서 칩이 노출되어 있어 외부환경으로부터 영향을 받기 때문에 센서소자의 내오염성과 내구성 확보가 중요하다. 따라서 본 연구에서는 절연막으로 비점착성의 테프론 막을 적용하여 외부환경으로부터 영향을 줄일 수 있는 열감지 방식의 MEMS 풍향 풍속 센서 칩을 제작하였다. 테프론 코팅막을 이용한 풍향 풍속 센서는 0.1m/s의 resolution을 가지며, 최대 15m/s까지 측정이 가능하여, 오염에 강하고 발수성을 센서를 제작하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.265-266
• /
• 2009

이 연구에서는 10년간(1997-2006년)의 기상청 AWS(Automatic Weather System) 자료를 이용하여 부산 해안의 바람분포 특성을 분석하였다. 그리고 부산 해안의 바랑분포 특성을 명확히 파악하기 위하여 해륙풍의 영향을 받지 않는 밀양의 바람분포 특성도 해석하여 비교하였다. 부산 해안의 평균풍속은 밀양보다 강하고, 부산 해안 중에서도 성인 영도와 가덕도의 평균풍속은 일광, 해운대 및 대연의 그것보다 약 2.0배 강한 특성을 보인다. 상판분석에 의하여, 부산 해안의 월별 평균풍속은 서로 변화 경향이 매우 유사함을 확인하였다. 부산 해안의 월별 평균풍속의 최대값은 9월에 나타나는데 이는 대풍의 영향과 밀접히 관련되어 있다. 최대순간풍속도 섬인 명도와 가덕도에서 특히 강하고, 부산 해안의 최대순간풍속은 주로 8-9월에 그 최대값이 관측된다. 부산 해안의 풍향별 관측횟수의 백분율을 살펴보면, 겨울은 남서풍-북북동풍이 우세하고 봄은 남서풍과 북동풍이 우세하다. 여름의 풍향 분포는 봄과 비슷하고, 가을의 풍향 분포는 겨울과 유사한 경향을 보인다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.98-107
• /
• 2021

During the sea trial test for the aerovane in AOE-II, a malfunction occurred in the wind detector movement around 40 to 90° on the starboard side and around 270 to 320° on the port side. The purpose of this study was to analyze and improve the cause of the above phenomenon. The wind detector was covered with a mast structure and was not affected directly by the blowing wind, and a vortex air current was formed behind the mast structure, causing the motion malfunction. The above problem was solved by moving and installing the wind detector on the newly installed mast yard. After conducting vibration analysis and reviewing the effects of vibration, the wind detector was installed in the new mast yard and verified by a sea trial test. Since the improvement plan was slightly effective, the position of the wind detector moved away from the mast on the new mast yard and was re-verified through a sea trial test. The movement malfunction of the wind detector did not occur, confirming that it is an appropriate improvement plan.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.55-56
• /
• 2002

풍속과 풍향은 지역의 오염원 추정에 중요한 변수가 되므로 풍속에 따른 오염물질 농도 및 풍향을 고려한 pollution rose를 통해 기상조건과 오염물질 농도의 관련성을 분석하고, 대상 지역의 오염원을 개괄적으로 추정하고자 한다. (중략)

• Journal of the Speleological Society of Korea
• /
• no.81
• /
• pp.7-19
• /
• 2007

본 논문은 초음파센서와 적외선센서를 이용하여 그 신호를 받아 주 모터를 제어한 것으로, 센서를 이용한 선풍기의 풍향 및 풍속을 제어하였다. 풍향제어는 인체감지센서와 ATmega128, DC모터를 사용하였고, 기본적으로 WmAVR과 PonyProg를 사용하여 소스코딩 및 다운로딩을 하였으며, 모터 구동드라이버는 모터제어에 범용으로 쓰이는 L298 칩을 사용하였다. 풍속제어는 초음파센서와 ATmeBa16, DC모터를 사용하여 제작하였고, 풍향제어부와 마찬가지로 WinAVR과 PonyProg 및 L298 칩을 사용하여 소스코딩 및 다운로딩을 하였다. 풍향제어는 물체가 정면에 위치하면 회전을 멈추고, 좌우로 $100^{\circ}$ 반경이내에서 거리 1m내외의 물체를 감지하도록 설계하였다. 풍속제어는 물체까지의 거리를 최소 3cm 최대 3m 이내에서 물체를 감지하여 모터의 속도를 제어할 수 있도록 하였고, 모터속도는 DC모터를 PWM 방식으로 제어하여 속도를 조절하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.2
• /
• pp.138-142
• /
• 2003

Influences of Ieodo Ocean Research Station(IORS) on the ambient wind field were investigated through a wind tunnel experiment. To secure accurate wind speeds and directions, distortions due to the structure itself on which wind-measuring devices are to be installed should be taken into account. It was shown that the wind speed ratio was sensitive to wind direction and measuring position rather than approaching wind speed. The wind speed ratios measured at main wind tower were more than B .0 in every approaching direction, and the distortion of wind direction was under 6$^{\circ}$.