• Title/Summary/Keyword: 풍속계

Search Result 191, Processing Time 0.026 seconds

Interface Conversion to Extend Communication Cable of Ultrasonic Sensor (초음파 센서 통신선 연장을 위한 인터페이스 변환)

  • Seo, Dae-Il;Kwon, Byung-Hyuk;Kim, Sang-Jin
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.17 no.3
    • /
    • pp.467-472
    • /
    • 2022
  • The 3D ultrasonic anemometer transmits measured data by connecting PC and RS232C interface. Depending on the observation location, it is often necessary to extend the cable connecting the PC and the sensor. When installing on the test bed of the Air Meteorological Agency, the original AWM2919 cable was required to be extended because the distance between the PC container and the equipment installation site was more than 30 m. The cable was extended through a process such as extending the AWM2919 cable, converting the interface with the PC from RS232C to RS485, and testing the RS485 communication. After the equipment was installed with an extended cable, data were remotely collected and analyzed to confirm successful cable extension.

熱線風速計에 의한 測定方法

  • 노병준
    • Journal of the KSME
    • /
    • v.23 no.5
    • /
    • pp.344-348
    • /
    • 1983
  • 유속의 최초 측정방법은 Torricelli (1608-1647)가 Bernoulli 방정식을 오리피스에 적용하여 유속 계산식 v =k.root.2gh를 유도하였고, 그 이후 역시 Bernoulli 방정식을 이용하여 Henri Pitot (1695-1771)는 정체점에 대한 이론을 고려하여 정체압을 측정하는 방법으로 가는관을 이용하여 Seine 강의 유속을 측정하는데 성공하므로서 이론적인 유속계산식 v =k.root.2gh는 가장 원시적인 피토우관(Pito-tube) 이나 오리피스에 의한 유속계산식이지만, 현재에 아무리 전기적인 정밀측정 방법과 레이저에 의한 측정방법이 개발되어도 결국 피토우관에 의한 측정값이나 압력측정치와의 교정(Calibration)이 선행되지 않으면 안되기 때문에, 피토우관에 의한 측정방법은 가장 원시적 이면서 가장 정확한 측정방법의 하나이다. 다만 피토우관에 의한 측정은 속도장내의 평균속도를 측정하게 되고 난류성분의 해석이 불가능하며, 그 측정이 일차원 유동에 국한된다는 것이 단점 으로 되어 있다. 이러한 점들을 보완할 수 있는 측정장치 들이 많이 개발되고 있으나 본 해설 에서는 공기유동의 경우 우리가 가장 많이 사용하고 있는 열선풍속계에 대하여 그 용법을 논하기 로 한다.

  • PDF

Fully Developed Turbulent Flow in Roughened Concentric Annuli : Experiment and Analysis (거친환형관내의 완전히 발달된 난류유동 : 실험과 해석)

  • Ahn, S.W.
    • Journal of Power System Engineering
    • /
    • v.4 no.2
    • /
    • pp.17-24
    • /
    • 2000
  • 직경비가 0.26, 0.39, 그리고 0.56인 경우 거칠기를 내벽면에, 외벽면에, 그리고 양벽면에 각각 설치한 동심환형관에서 완전히 발달된 난류유동에 대한 거칠기 효과를 실험과 이론으로 해석하였다. 그리고 거칠기 효과를 정량적으로 파악하기 위해 양벽면 모두 매끈한 환형관의 경우도 포함하였다. 실험에서 마찰계수를 구하는데 필요한 속도분포와 전단응력들은 피토튜브와 X-형 열선풍속계를 사용하였다. 이론 해석은 수정대수 난류모델을 사용하였고 그 결과를 이론값과 비교하여 아래의 결론을 얻었다. 1) 무디다이어그램 (Moody diagram)은 거칠기가 설치된 이중관에는 적용할 수 없음을 보였다. 2) 경우(c) 와 (d)에서는 반경비가 클수록 반드시 마찰계수가 증가하지 않았다. 3) 4개의 경우중 거칠기로 인해 마찰계수가 증가하는 크기의 순서는 경우(d)가 가장 컸고 경우(a)가 가장 작았다.

  • PDF

The Effects of Pressure, Wind Velocity, and Diameter of Wet Element on the Measurement of Relative Humidity by a Psychrometer (압력, 풍속 및 습구온도계의 크기가 건습구습도계를 이용한 상대습도 측정에 미치는 영향)

  • Chi, D.S.;Kim, S.T.;Park, C.B.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.2 no.2
    • /
    • pp.137-141
    • /
    • 1990
  • When the relative humidity is measured with an aspirated psychrometer, three factors, which affect the measurement of relative humidity, are atmospheric pressure, the size of wet element and the wind velocity. This paper investigated the effects of the above three factors, and the computer code was developed in order to enhance the accuracy of the relative humidity measurement. As results, it is found that the relative humidity decreases by 6%RH with increasing atmospheric pressure from 650 mbar to 1100 mbar. It is found that the relative humidity drops down when the size of the wet element increases, though the effect of the size of the wet element is not significant. Finally, relative humidity increases with the increasing wind velocity. The difference between the psychrometic table in the present KS and the present results is about 2%RH maximum. As a conclusion, the three factors mentioned above should be considered in order to secure accurate measurement of relative humidity.

  • PDF

Characterization of three-dimensional ultrasonic anemometer using phase measurement (위상측정방식을 이용한 3차원 초음파 풍향풍속계의 특성분석)

  • Park, Do-Hyun;Yeh, Yun-Hae
    • Journal of Sensor Science and Technology
    • /
    • v.15 no.6
    • /
    • pp.442-448
    • /
    • 2006
  • Ultrasonic anemometers using pulse envelope detection-based method are standard instruments in most meteorological studies. In this paper, a new phase measurement method is tried to achieve the enhanced resolution without changing dimensions. The measurement sensitivity, dynamic range, and measurement speed of the new instrument are 0.2 mm/s, 13.3 m/s, and 13 measurements/sec, respectively. A graphic user interface is added to show the velocity and direction of the wind with the speed of sound and temperature of the wind in the 3 dimensional space. The new anemometer could be useful for the measurement of the air speed, the flow of fluids, and even air flow inside the downtown buildings.

Effect of Roughness Position on the Characteristics of Turbulence in Concentric Annuli (동심환형관에서 난류특성에 미치는 조도위치의 효과)

  • Ahn, S.W.;Lee, W.J.
    • Journal of Power System Engineering
    • /
    • v.1 no.1
    • /
    • pp.61-69
    • /
    • 1997
  • 본 연구는 동심환형관에서 거칠기가 없이 매끈한 경우, 내측벽에 만, 외측벽에 만, 그리고 양측 모두에 거칠기가 있는 4경우에 대해 직경비가 0.26, 0.39, 그리고 0.56일 때 벽면에 설치된 거칠기 위치들이 난류유동장에 미치는 효과를 실험적으로 조사하고자 한다. 최대속도와 전단응력이 0인 지점들, 시간평균속도의 구배들, 그리고 와확산계수들을 X형 열선풍속계와 이중 피토튜브를 사용하여 측정하였다. 본 연구를 통하여 동심환형관에 설치된 거칠기들이 난류유동에 미치는 효과에 대한 정량적자료를 제시할 수 있었다.

  • PDF

Study on the Turbulent Boundary Layer Disturbed by a Triangular Prism near the Wall (벽근방의 3각주에 의하여 교란받는 난류경계층에 관한 연구)

  • Sim, W.G.;Lee, K.J.;Cho, Y.C.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.3 no.3
    • /
    • pp.161-167
    • /
    • 1991
  • This paper presents the results of some measurement of the fluctuating velocity field in the turbulent boundary layer disturbed by a triangular prism and discusses the discovery of the disturbed boundary layer. A prism of height 8mm was used for experiments. The streamwise location of the prism was fixed at 1200mm downstream from the leading edge and the space between the prism center and the wall was set at three different values, 6, 15 and 33.5mm. The results show that the near-wall region of the disturbed boundary layer recovers original state much more quickly than the outer region. In the case h=6mm the recovery is faster than the other cases. Moreover, it was found that peak of fluctuating velocities moves outwards somewhat rapidly with increasing ${\times}$ mainly due to the turbulent diffusion of the fluctuating velocity.

  • PDF

An analysis of 'Slang on hygiene practices' found in "ChoSunEuiHakGye" ("조선의학계"에 실린 '위생풍속(衛生風俗)에관(關)한이어(俚語)' 분석)

  • Jung, Jihun;Lee, Sangjae
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.18 no.1
    • /
    • pp.103-111
    • /
    • 2014
  • Objective : Understanding the state of sanitation policy during the period of Japanese colonization of Korea. Method : Analyze 'Slang on hygiene practices' found in Korean medical journal "ChoSunEuiHakGye" that published in the period of Japanese colonization. And analyze articles that were same theme. Results : Japanese colonial policy regards the colony people's old adage of health as outrageous things. Japanese colonial police demands don't use old adage of health because it is obstruction to colonial hygiene policy. Conclusion : The Japanese occupation health administration led by the Japanese police considered Korean people as significant. And they regarded old adage of health as harmful habits. In addition, the knowledge derived from traditional Korean medicine was turned away outrageous things. Traditional Korean medicine knowledge lost the chance of renewal.

Assessment on Gene Flow Possibility from GM Non-GM Cotton

  • 윤도원;오성덕;이성곤;이강섭
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2020.11a
    • /
    • pp.132-132
    • /
    • 2020
  • 아직까지 국내에서 GM작물이 상업화를 위해 승인된 예는 없지만 생명공학기술의 발전으로 GM작물의 개발은 급속한 증가 추세에 있다. 비의도적인 방출로 인해 미승인 LMO 목화가 전국적으로 재배되어 국립종자원 주관으로 양성 판정된 재배지의 목화를 폐기 처분하였으나(2017), GM작물이 유해하다는 인식과 환경에 방출되어 생태계를 교란시킨다는 인식이 팽배해 있는 현실에서 과학적으로 유전자의 이동성을 검증하는 노력이 중요하다. 자식성 작물의 화분의 이동성 조사를 위해 중앙의 코어 위치에 LM작물을 식재한 후 LM작물 주변에 재배품종을 심어 유전자이동 가능성을 조사하고 재배 환경에 의한 영향을 평가하기 위해 포장 주변 기상상황 데이터-온도, 습도, 풍속, 풍향, 기압, 강수량 등을 분석하고 기상상황이 화분의 전이에 미치는 영향 조사하였다.

  • PDF

The Influence of Ventilation and Shade on the Mean Radiant Temperature of Summer Outdoor (통풍과 차양이 하절기 옥외공간의 평균복사온도에 미치는 영향)

  • Lee, Chun-Seok;Ryu, Nam-Hyung
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.40 no.5
    • /
    • pp.100-108
    • /
    • 2012
  • The purpose of the study was to evaluate the influence of shading and ventilation on Mean Radiant Temperature(MRT) of the outdoor space at a summer outdoor. The Wind Speed(WS), Air Temperature(AT) and Globe Temperature(GT) were recorded every minute from $1^{st}$ of May to the $30^{th}$ of September 2011 at a height of 1.2m above in four experimental plots with different shading and ventilating conditions, with a measuring system consisting of a vane type anemometer(Barini Design's BDTH), Resistance Temperature Detector(RTD, Pt-100), standard black globe(${\O}$ 150mm) and data acquisition systems(National Instrument's Labview and Compfile Techs' Moacon). To implement four different ventilating and shading conditions, three hexahedral steel frames, and one natural plot were established in the open grass field. Two of the steel frames had a dimension of $3m(W){\times}3m(L){\times}1.5m(H)$ and every vertical side covered with transparent polyethylene film to prevent lateral ventilation(Ventilation Blocking Plot: VP), and an additional shading curtain was applied on the top side of a frame(Shading and Ventilation Blocking Plot: SVP). The third was $1.5m(W){\times}1.5m(L){\times}1.5m(H)$, only the top side of which was covered by the shading curtain without the lateral film(Shading Plot: SP). The last plot was natural condition without any kind of shading and wind blocking material(Natural Open Plot: NP). Based on the 13,262 records of 44 sunny days, the time serial difference of AT and GT for 24 hour were analyzed and compared, and statistical analysis was done based on the 7,172 records of daytime period from 7 A.M. to 8 P.M., while the relation between the MRT and solar radiation and wind speed was analyzed based on the records of the hottest period from 11 A.M. to 4 P.M.. The major findings were as follows: 1. The peak AT was $40.8^{\circ}C$ at VP and $35.6^{\circ}C$ at SP showing the difference about $5^{\circ}C$, but the difference of average AT was very small within${\pm}1^{\circ}C$. 2. The difference of the peak GT was $12^{\circ}C$ showing $52.5^{\circ}C$ at VP and $40.6^{\circ}C$ at SP, while the gap of average GT between the two plots was $6^{\circ}C$. Comparing all four plots including NP and SVP, it can be said that the shading decrease $6^{\circ}C$ GT while the wind blocking increase $3^{\circ}C$ GT. 3. According to the calculated MRT, the shading has a cooling effect in reducing a maximum of $13^{\circ}C$ and average $9^{\circ}C$ MRT, while the wind blocking has heating effect of increasing average $3^{\circ}C$ MRT. In other words, the MRT of the shaded area with natural ventilation could be cooler than the wind blocking the sunny site to about $16^{\circ}C$ MRT maximum. 4. The regression and correlation tests showed that the shading is more important than the ventilation in reducing the MRT, while both of them do an important role in improving the outdoor thermal comfort. In summary, the results of this study showed that the shade is the first and the ventilation is the second important factor in terms of improving outdoor thermal comfort in summer daylight hours. Therefore, it can be apparently said that the more shade by the forest, shading trees etc., the more effective in conditioning the microclimate of an outdoor space reducing the useless or even harmful heat energy for human activities. Furthermore, the delicately designed wind corridor or outdoor ventilation system can improve even the thermal environment of urban area.