• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.275-280
• /
• 2003

This study conducted to investigate the effect of dietary germanium biotite by protein level in laying hen diets. One hundred forty four, 51 weeks old ISA brown commercial layer, were used in experiment. Dietary treatments were 1) low protein diet(LPD), 2) high protein diet(HPD), 3) LPD-GB(LPD + 1.0% germanium biotite) and 4) HPD-GB(HPD + 1.0% germanium biotite). Henday egg production tended to be increased as the concentration of protein in diets increased with significant difference(P<0.01). Egg weight tended to decrease by increasing of supplementation germanium biotite in the diets(P<0.01). Egg shell breaking strength was not influenced by germanium biotite supplementation(P>0.05). Large band of egg decrease as increasing of supplementation germanium biotite in the diets(P<0.02). Sharp and middle band of egg were not influenced by germanium biotite supplementation. Egg yolk index tended to decrease as increasing of supplementation germanium biotite in the diets(p<0.01). Fecal propionic acid(P<0.01) and butyric acid(P<0.03) were decrease as the concentration of germanium biotite in the diet was increased. Also, butyric acid increased as the concentration of protein in diets increased with significant difference(P<0.02). Supplementation germanium biotite in the diet reduced the fecal acetic acid(P<0.01). Fecal $NH_3$-N of hens fed HPD-GB diet was decreased(P<0.05) compared to that LPD-GB diet. In conclusion, germanium biotite supplementation to layer diets can reduce fecal volatile fatty acid compabebts.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.446-455
• /
• 2015

Based on comparative studies on standards and grading procedures of machine graded lumber in Korea and other countries, this study proposed a procedure of determining the grade classification and design strengths of domestic machine graded lumber. Differences between machine stress rated lumber and E-rated laminations were detailed in order to clarify the need for the procedure improvement. To this improvement the use of average MOE requirement for grading was introduced instead of the fixed minimum MOE requirement which is currently used in the Korean standards. It was found that the fixed minimum MOE requirement method was easier for an inspector to grade but, less efficient as a strength predictor than the average MOE requirement method. The advantage of average MOE requirement method is statistically MOR-MOE regression-based MOR prediction and highly efficient in quality control though it requires a computer-aided operation system in an initial setup. A major weakness of the current Korean grading system was found that different strength characteristics depending on wood species were not reflected on the grade classification and the tabulated allowable design stress. The proposed procedures were developed taking advantages of respective merits of both methods and based on MOR-MOE regression analysis. Through this procedure, the grades of machine stress rated lumber should be revised to become interchangeable with E-rated lamination, which would be beneficial to the cost competitiveness of domestic machine graded lumber and glued laminated timber industry.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.2
• /
• pp.119-127
• /
• 2015

To date, detection of microbial populations in dairy products has been performed using culture media, which is a time-consuming and laborious method. The recently developed chromogenic media could be more rapid and specific than classical culture media. However, the newly developed molecular-based technology can detect microbial populations with greater rapidity and sensitivity than the classical method involving culture media and chromogenic media. This molecular-based technology could provide various options for monitoring the characterization of different states of bacteria and cells. Thus, it could help upgrade the processing system of the dairy industry so as to maintain the safety and quality of dairy foods. Among the various newly developed molecular-based technologies, flow cytometry can potentially be used for monitoring microbiological populations in the dairy industry if official international standards are available for this purpose. When omics technology would have biomarker identification, it could be regarded as the rapid and sensitive analytical methods. Methods based on PCR, which has become a basic technique in microbiological research, can be developed and validated as alternative methods for quantification of dairy microorganisms. This review discusses methods for monitoring microbiological populations in dairy foods and the limitations of these studies, as well as the need for further research on such methods in the dairy industry.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.835-840
• /
• 2003

Two hundreds and twenty three pork carcasses of commercial breeds were studied for comparing to technical quality characteristics of pork identified by National Pork Producers Council(NPPC) scale. pH and conductance(C) were taken in 1(pH$_1$, C$_1$), 3(pH$_3$, C$_3$), 6(pH$_6$, C$_6$) and 24hr(pHu, Cu) postmortem on 4~5th thoracic vertebrae. Visual color and CIE value were estimated in longissimus dorsi(LD) muscle in 24hr postmortem on the two sites(4~5th thoracic vertebrae and last vertebrae) using National Pork Producers Council(NPPC) scale and color difference meter. Significant differences were observed in pH$_1$, pHu, Cu, CIE L$^{*}$ value, water holding capacity(WHC) and juiciness at all scales(p〈0.05). But, pH and CIE L$^{*}$value were considerably affected by postmortem time and measuring site. NPPC scale was highly related with CIE L$^{*}$(R$^2$=0.77) and WHC(R$^2$=0.66), and moderately related with C$_{u}$(R$^2$=0.59) and pH$_{u}$(R$^2$=0.54), and poorly related with pH$_3$(R$^2$=0.32), pH$_6$(R$^2$=0.28) and C$_1$～C$_6$(R$^2$=0.03~0.18).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.221-232
• /
• 1999

Dry matter yield and ear percent are commonly considered the most important factors for evaluating silage corn(Zea mays L.) hybrids for silage production. But quality of stover as well as forage production in important in identification of hybrids. The objective of this study was to evaluate nutritional value of stover, ear and whole plant from eight corn hybrids for silage at two dates of planting. In content of fiber components(ADF, NDF, ADL, hemicellulose and cellulose) from stover, ear and whole plant samples, optimum planting corn was lower than late planting one(P<0.01). Differences(P<0.01) in the content of fiber components in stover and whole plant were observed among the corn hybrids. Differences between different planting dates in TDN and $NE_1$ were detected in the stover and whole plant samples(P<0.05). Differences among the corn hybrids in TDN and $NE_1$ were also observed in stover, ear and whole plant samples. TDN and $NE_1$ of 'G4624', 'P3352' and 'P3394' for whole plant were higher than those of the other corn hybrids. ln vitro dry matter digestibility(IVDMD) at optimum planting date was higher than that of late(P<0.05), and there also were significant differences among the corn hybrids. Correlation coefficients for whole plant IVDMD with NDF, ADF, hemicellulose, and cellulose were $-0.82^{**}$, $-0.71^{**}$, $-0.63^{**}$, and $-0.69^{**}$, respectively. Results of this study indicate that optimum planting of corn resulted in increased quality of silage corn. Differences among corn hybrid, particularly, in nutritive value of stover and whole plant were also observed. Therefore, the nutritional value of stover and whole plant may be important in assessing the corn hybrids for silage.

• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.176-184
• /
• 2018

The aim of the present work was to develop simultaneous methods of quantification of carazolol, azaperone, and azaperol residues in livestock and fishery products using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Samples were extracted from beef, pork, chicken, egg, milk and shrimp using acetonitrile (ACN); while flat fish and eel were extracted using 80% ACN. For purification, ACN saturated n-hexane was used to remove fat composition. The standard calibration curves showed good linearity as correlation coefficients; $r^2$ was > 0.99. Average recoveries expressed were within the range of 67.9-105% for samples fortified at three different levels ($0.5{\times}MRL$, $1{\times}MRL$ and $2{\times}MRL$). The correlation coefficient expressed as precision was within the range of 0.55-7.93%. The limit of quantification (LOQ) was 0.0002-0.002 mg/kg. The proposed analytical method showed high accuracy and acceptable sensitivity based on Codex guideline requirements (CAC/GL71-2009). This method can be used to analyze the residue of carazolol, azaperone, and azaperol in livestock and fishery products.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.107-115
• /
• 2000

Preservative effects of natural preservatives, citric acid and salt on chopped garlic were investigated. Bacterial multiplying and browning of chopped garlic were very effectively repressed by 0.5-1% citric acid. Salt had an effect on the repression of bacteria multiplying and browning of chopped garlic except for 1% NaCl. Synergistic effect between citric acid and NaCl was also very good for decreasing bacteria multiplying and maintaining Hunter color of chopped garlic. Compounded effect of the GF. citric acid. and ascorbic acid was somewhat proper in the sensory evaluation of chopped garlic. And the sensory evaluation score was the highest in chopping size 3mm(diameter) and viscosity 4500cp. of chopped garlic.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.572-576
• /
• 2010

Biological products, such as live varicella vaccine, are composed of biological substances derived from biological organisms. It is very difficult to identify these biologics' characteristics by analysis of simple physical and chemical methods alone. So the reference material is essential in order to evaluate the quality of bilogics. The 1'st national standard for varicella live vaccine was manufactured, established in 2002 and 2003, and have been used for the manufacturer's quality control and national lot release since then. As the lack of its availability and the decrease of its stability, this study was initiated by National Institute of Food and Drug Safety Evaluation (NiFDS) in 2008 to manufacture and establish the 2nd national standard for varicella live vaccine. The candidate material was manufactured from one of domestic manufacterers and the joint research of the NiFDS and manufacturers of varicella live vaccine was conducted to estimate of the reliable virus content. In the collaborative study, 3 laboratories including NiFDS performed the virus content test more than 7 times and all assay results were statistically analyzed. The mean coefficient of variation (CV) was 1.24%, and the geometric mean titre (GMT) variation range of each laboratory was low. On the basis of the results of this study, the candidate material of 2nd national standard for varicella live vaccine was assigned a potency of 4.26 log10 pfu/0.5 mL, when reconstituted in 0.7 mL.