• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.865-875
• /
• 1988

본 연구에서는 부정숙 등에 의한 실험결과를 토대로 하여, 단이 진 2차원 벽 면분류에 대한 수치해석으로 표준 K-.epsilon.모델과 LRM 그리고 PAM을 적용하고, upwind 및 skew-upwind scheme을 적용하여 그 결과를 검토하고자 한다.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.134-139
• /
• 2011

This study was conducted on the characteristics of fluid flow and heat transfer in the ribbed tube used for a steam power plant. It was assumed that the air is incompressible and therefore, its density is not variable according to temperature. In addition, the gravity was ignored. A commercial code of computational fluid dynamics was used and standard k-$\epsilon$ model was used together with the energy equation included to calculate heat transfer. As Reynolds No. was low at the velocity distribution in the axial direction, the air reached hydro-dynamically fully developed region shortly but high Reynolds No. yielded late full hydro-dynamic development. The velocity distribution and non-dimensional temperature distribution were all physically reasonable and thus had a good agreement with the experimental result.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.202-212
• /
• 1985

본 논문에서는 이러한 연구의 첫단계로 Gosman과 Ideriah가 다룬 TEACH-2E전 산프로그램을 모체로 하여 본 논문의 문제에 적합하도록 수정하여 사용하였다. 그러 나 기본적인 k-.epsilon.난류모델은 수정하지 않았다. 한편, 본 논문에서는 열선풍속계를 이용하여 평균 속도분포 및 난류특성을 계측하고 계산결과와 비교하였다. 이를 통하 여 표준형 k-.epsilon.모델을 이용한 TEACH-2E코드의 특성을 파악하고 이를 위한 실험 데이터 를 확보하는데 중점을 두었다.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.911-918
• /
• 1997

The turbulent viscous wake flows behind a single airfoil, two-dimensional stationary blade row and three-dimensional rotating blade row were calculated, and the numerical results were compared with experimental ones. The numerical technique was based on the SIMPLE algorithm using three turbulent closure models, standard k-.epsilon. model(WFM), low Reynolds number k-.epsilon. model(LRN) and Reynolds stress model (RSM). In the case of a single airfoil, WFM, LRN and RSM presented fairly good velocity distributions in the wake compared with experimental data. In the case of the stationary blade row, LRN and RSM presented better results than WFM for wake velocity distribution, and especially LRN showed best results among these three turbulent models. In the case of the rotating blade row, WFM and LRN showed fairly good agreement with experimental data of the three-dimensional velocity component distributions in the range from hub to mid span region. LRN was also superior to WFM in accuracy of prediction for the wake velocity distribution as same with the cases of a airfoil and the stationary blade row.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.716-724
• /
• 1990

본 연구에서는 2차원 경사충돌분류에 대한 실험을 수행하였고, 이 결과를 수] 치해석에 의한 계산치와 비교하였다. 실험에서는 난류특성을 구명하기 위하여 열선 풍속계를 사용해 충돌각의 변화에 따른 평균속도, 각 난류응력성분, 압력등을 측정하 였다.수치해석을 위한 난류모델로는 표준 K-.epsilon.모델을 사용하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1309-1314
• /
• 2008

I.G.G is abbreviation for Inert Gas Generator, High temperature in Cargo Tank it desulfurize, exhausted and froze the gas that combined brimstone element and soot, then supply Inert gas by blower, and mack tank inside incombustible range this is equipment that nip in the bud the explosion. The blower for suppling inactivated gas has big impeller with heavy weight to achieve the high pressure, it causes a delay for first operation time and too much load is delivered to motor, total destruction by fire of motor is happening frequently. On this research, we will reduce the size & weight of impeller and install it with several stage, it makes an effect for reducing the first operation time. We also intend to contribute to efficient IGG blower design by research a flowing & pressure specialty from the diameter of impeller, number of blade, and size of casing.

• 한국화재소방학회논문지
• /
• 제19권1호
• /
• pp.87-92
• /
• 2005

본 연구에서는 도로터널 화재에 따른 열 전달 및 연기거동의 특성과 피난시뮬레이션에 대하여 수치적 연구를 수행하였다. 화재발생부분의 발열량은 30MW이며, 수치해석에 사용된 난류모델은 표준 $\kappa-\varepsilon$ 모델을 사용하였다. 도로터널에서 열기류 및 연기의 이동경로 형태를 예측하여 방재 및 피난 시스템을 구축하는데, 도로터널 설계 시에 유용한 자료로 이용될 수 있다.

• 설비공학논문집
• /
• 제28권1호
• /
• pp.1-6
• /
• 2016

This paper studies the wind pressure distribution over the Commonwealth Advisory Aeronautical Council building model (CAARC model) using CFD. We also considered the interaction between the CAARC model and other buildings. The Reynolds number based on the building height was 380,000. The number of sells for the simulation was about 500,000. The wind pressure was lowest when the wind direction was blowing at an angle 45 degrees of the CAARC model. When the gap between the two buildings in front of the CAARC was over 1/2 the horizontal length of the CAARC model, the wind pressure was higher than the pressure without the two buildings. When the distance between the two front buildings and the CAARC was less than 1.5 times the vertical length of the CAARC model, the wind pressure increased. Accordingly, the relative distance between two buildings or the distance from the CAARC model should be considered when extra wind exists due to other buildings.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3272-3281
• /
• 1996

The flow analysis method which had been developed for the numerical calculation of 3-dimensional, incompressible and turbulent flow within an axial compressor was extended to the flow field within centrifugal impeller. In this method based on the SIMPLE(Semi Implicit Method Pressure Linked Equations) algorithm, the coordinate transformation was adopted and the standard k-.epsilon. model using wall function was used for turbulent flow analysis. The calculated flow fields have agreed very well with measurement results. Especially, 3-dimensional and viscous flow characteristics including secondary flows, jet-wake flow and decreased pressure rise along impeller passage, which can't be predicted by inviscid Q3D calculation were predicted very reasonably.

• 융합신호처리학회논문지
• /
• 제21권4호
• /
• pp.170-176
• /
• 2020

본 연구는 선박의 조종성능에 직접 영향을 미치는 방향타의 양력, 항력 및 모멘트를 전산유체역학을 이용하여 연구하였다. 힘과 모멘트에 영향을 미치는 전형적인 선박 방향타 중 하나는 바다에서 조종하는 동안 선수 타이다. 따라서 선박 선수타에 대한 힘과 모멘트를 연구하였다. IFS 선수 타 시리즈 중 균형 IFS 54 BR 15는 연구에 사용되었다. 난류 모델로는 표준 k-epsilon이 연구에 적용되었다. 선수 타의 유체 역학, 특히 양력, 항력 및 모멘트 계수는 서로 다른 공격 각도에 대해 계산되었다. 본 연구에 사용된 유동과 선수 타 사이의 받침각은 0도에서 5도 간격씩 35도까지 총 6개이다. 선박의 운동 성능에 미치는 영향에 대한 계산 결과는 이전 실험 연구 결과와 비교되었다.