• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.184-187
• /
• 1994

Size distributions of rice flour measured by microscope, sieve, Coulter counter (electrozone) and aerodynamic (Aerosizer) methods were compared. Among the particle sizes measured by four methods, those by microscope and sieve were the smallest and the largest, respectively. Difference was found between the particle sizes measured by Coulter counter and aerodynamic methods.

• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.531-539
• /
• 2015

Properties of normal-strength mortar containing coarsely-crushed coal bottom ash considering standard particle size distribution of fine aggregate were investigated. Mortar containing raw bottom ash was applied as a reference. By crushing the bottom ash with a particle size larger than fine binder but smaller than fine aggregates, i.e., coarse-crushing, water absorption and specific gravity of the particles could be controlled as similar levels to those of natural fine aggregates. Workability and strength of the mortar were not changed and even increased when the coarsely-crushed bottom ash was added considering standard particle size distribution in Standard Specification for Concrete, while those were decreased when raw bottom ash was added without any treatment. When a replacement ratio of coarsely-crushed bottom ash was less than 30 vol.%, there were no significant decrease in dynamic modulus of elasticity and dry shrinkage of the mortar.

• Explosives and Blasting
• /
• v.42 no.1
• /
• pp.23-33
• /
• 2024

Recently, various techniques and patented methods on blasting operation are being newly developed. In this study, test construction of the MDS blasting method was performed, and the fragmentation size and the occurrence rate of rocks exceeding 300mm were measured and analyzed in comparing to normal blasting method. Test construction was performed three times each for normal and the MDS at the same bench for each round, and fragmentation size(P80) and occurrence rate of rocks exceeding 300mm(S30) were measured using digital image processing. A sieve bucket was also manufactured on-site to sort oversized rock particles from muck piles, and their weights and equivalents were measured to calculate actual values. As a result, the fragmentation size decreased of 21.0% with the MDS compared to normal, and 100-S30 decreased of 10.1%, with actual values decreasing of 7.6%. Although there were variations in blasting effects for each round due to differences in rock quality at site, overall, the MDS proved to be more effective compared to normal blasting method under equivalent conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.248-248
• /
• 2019

유사는 이동 형태에 따라 소류사와 부유사로 구분된다. 하천의 흐름을 통해 이동하는 유사의 대부분은 부유사의 형태로 이동하며, 부유사의 부유 거동은 난류 강도와 유사 입자의 침강 속도로 인해 결정된다. 이에 따라 부유사의 부유 거동을 이해하기 위해서는 정확한 침강 속도의 산정과 난류에 대한 이해가 요구된다. 유사의 침강 속도는 밀도와 크기로 대표되는 유사의 특성을 이용하여 결정된다. 하천에서 부유사가 여러 크기를 갖는 유사 입자들이 혼재된 형태로 이동하는 것을 생각해 볼 때, 침강 속도의 분포를 이해하기 위해서 입도 분포에 대한 연구는 필수적임을 알 수 있다. 본 연구에서는 유사 입자의 입도 분포에 난류 강도가 미치는 영향을 살펴본다. 연구를 수행하기 위해 모래의 입도 분포가 로그 정규 분포를 따를 것이라는 가정을 적용하여 난류의 영향을 고려하는 부유사의 입도 분포 모형이 개발되었다. 부유사의 입도 분포는 흐름의 유사 이송 능력에 따라 분포의 표준 편차와 같은 물리량이 변화할 것으로 예측되는데, 흐름 내 유사의 이동과 흐름의 유사 이송 능력을 함께 고려하기 위해 개발되는 유사의 입도 분포 모형은 유사 이동 모형과 결합된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.308-308
• /
• 2020

유사는 이동 형태에 따라 소류사와 부유사로 구분된다. 하천의 흐름을 통해 이동하는 유사의 대부분은 부유사의 형태로 이동하며, 부유사의 부유 거동은 난류 강도와 유사 입자의 침강 속도로 인해 결정된다. 이에 따라 부유사의 부유 거동을 이해하기 위해서는 정확한 침강 속도의 산정과 난류에 대한 이해가 요구된다. 유사의 침강 속도는 밀도와 크기로 대표되는 유사의 특성을 이용하여 결정된다. 하천에서 부유사가 여러 크기를 갖는 유사 입자들이 혼재된 형태로 이동하는 것을 생각해 볼 때, 침강 속도의 분포를 이해하기 위해서 입도 분포에 대한 연구는 필수적임을 알 수 있다. 본 연구에서는 유사 입자의 입도 분포에 난류 강도가 미치는 영향을 살펴본다. 연구를 수행하기 위해 모래의 입도 분포가 로그 정규 분포를 따를 것이라는 가정을 적용하여 난류의 영향을 고려하는 부유사의 입도 분포 모형이 개발되었다. 부유사의 입도 분포는 흐름의 유사 이송 능력에 따라 분포의 표준 편차와 같은 물리량이 변화할 것으로 예측되는데, 흐름 내 유사의 이동과 흐름의 유사 이송 능력을 함께 고려하기 위해 개발되는 유사의 입도 분포 모형은 유사 이동 모형과 결합된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.36-37
• /
• 2014

Construction work in island areas requires the materials to be transported by ship and plane, and it causes an increase in the construction costs. In addition, the construction work near marine zones may produce the marine pollution due to the harmful substances in the cement. Recently, nature-friendly construction materials are increasingly used, and there is a need to select and develop appropriate construction materials. In this study, the compressive strength, tensile strength, flow and chloride content of the mortar mixed with cement and muddy tidal flat were measured to reduce the amount of cement by applying the natural materials, muddy tidal flat and marine sand, and the results were provided as the basic construction material data.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.55-64
• /
• 2004

Maximum dry unit weight, ${\gamma}_{dmax}$, is the most important engineering properties for subgrade soil. Existing models to predict ${\gamma}_{dmax}$ containing many parameters, seem to be rather complex. This paper presents new simple models to predict ${\gamma}_{dmax}$. for sandy soils, A number of sieve analysis and compaction tests for 36 types of sands were conducted to develop the regression-based models. Parameters used to estimate ${\gamma}_{dmax}$ are both the geometric mean and geometric standard deviation of the soils, or the particle-size distribution curve parameters. Maximum dry unit weights predicted by the models are in good agreement with the laboratory measurements for the soil samples obtained at 16 locations within the Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.219-225
• /
• 2018

The aim of the research is improving the quality of concrete by using the alternative aggregate resources and recycling wastes. To make a combined aggregate fitted in standard particle size distribution curve, crushed sand from blasted rock debris was used as a base aggregate. Additionally, to increase the portion of fine particles, sea sand was mixed. Although these aggregate combination fit the standard particle size distribution curve, in this research, raw coal ash was replaced as a microfine. According to the experiment, by replacing 5% raw coal ash, the most favorable results were achieved in aggregate gradation and cement mortar quality.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.369-372
• /
• 1990

Although the measurement of oil globule size distribution is necessary to detect the process of demulsification, the reasonable methodology for its measurement has not been suggested because the solution of soymilk contains insoluble soybean particle and the protein to interfere with the detection of oil globule or oil content. The oil globule size distribution was measured by the homogeneous suspension and cumulative method under gravitational force or centrifugal force, which were modified with Stokes' low. The geometric mean diameter of oil globules in this soymilk was $033{\mu}m\;and\;031{\mu}m$ under gravitational method and centrifugal method, respectively. The differences of oil globule size distribution in the solutions emulsified by different pressures were detected by this method. The mean diameter of the solutions treated at higher pressure was shifted to smaller size and the distribution pattern of the solutions at higher pressure became more compact around the mean diameter.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.55-63
• /
• 1984

Berglund-Liu 진동방식 단분산 분체입자 발생기(Berglund-Liu vibrating orifice monodisperse aerosol generator)에 의하여 제작한 단분산 광흡수성 표준분체입자를 사용하여 레이저 산란광 분체입도 측정기 (Knollenberg active scattering aerosol spectrometer)의 반응특성을 조사하 였다. 실험결과, 기기의 반응특성은 Mie 산란이론에 의하여 계산한 이론치와 매우 잘 일치하며 특히 광흡수성 분체입자는 광통과성 분체입자가 다의적인 특성을 나타내는 것에 반하여 거의 단조증가하는 일의적인 특성을 가지고 있으며 광흡수성 분체입자의 반응특성이 제작자의 교정 치에 가까운 결과를 나타내었다.