• Journal of the Korean Society for information Management
• /
• v.21 no.3
• /
• pp.227-250
• /
• 2004

In order to design effective electronic records management systems, it is viable to consider both traditional principles of records management, proven to be effective, and the characteristics of digital information. ISO 15489, an international standard for records management, is acknowledged as the most useful guidelines for this goal. The present study extracted basic principles of electronic records management from its provisions of 7 functional steps. It then compared the principles to system requirements of three system design criterion, developed by Department of Defense(U.S.A.) Public Records Office(Britain). and European Union respectively. Common requirements, included in all three criterion. were then searched in the Korean standard of developing automated systems for records centers. Finally, suggestions were made to develop a Korean standard for electronic records management system, elaborating from the core requirements of the system found by the present study.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.269-275
• /
• 2018

In order to establish the criterion for analyzing outdoor weather conditions in the greenhouse heating and cooling system design, we analyzed heating and cooling design outdoor temperatures by the annual percentile method and compared with design outdoor temperatures by the existing seasonal percentile method. In the annual percentile method, 0.4%, 1% and 2% of the total 8,760 hours per year are presented as cooling design outdoor temperatures and 99.6% and 99% as heating design outdoor temperatures. When the annual percentile method was adopted, heating design outdoor temperatures increased by 6.7 to 9.6% compared with the seasonal percentile method, and cooling design outdoor temperatures decreased by 0.6 to 1.1%. The maximum heating load in the same greenhouse condition decreased by 3.0 to 3.6% when the annual percentile method was adopted, but the effect on the maximum cooling load was insignificant. Therefore, it is necessary to consider the change of heating design outdoor temperatures to the annual percentile method, but it is not necessary to change the cooling design outdoor temperatures since there is little difference between the two methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.663-668
• /
• 1996

하나로를 이용한 재료조사시험용 계장캡슐 개발에 앞서 캡슐 mock-up (96M-01K)을 제작하였으며, 이 캡슐 mock-up의 실제 하나로 조사시험공 장입시를 가정하여 강도 및 열적 건전성 평가를 수행하였다. 평가 결과 하나로 정상출력시 (30MW) 캡슐 mock-up 내 조사시료의 온도는 진공 및 heating system을 사용하여 279~473$^{\circ}C$ 범위로 조절될 수 있었으며, 목표 조사기간 동안 캡슐 mock-up은 강도적으로 허용기준을 충분히 만족함으로써 안전한 것으로 판명되었다. 향후 본 캡슐 mock-up을 이용한 노외 simulation 실험 등을 통하여 기존 캡슐 mock-up의 건전성을 확인한 후 이를 기준으로 하여 표준형 하나로 캡슐을 설계 .제작하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.749-752
• /
• 2003

건설분야는 전산화가 낙후되어 있고, 개발 시스템간의 호환성이 결여되어 이중 삼중의 자료처리와 불필요한 인력소요 등 비효율성이 대두되고 있으며, 특히 국가적인 표준코드와 표준업무프로세스의 기준 제시가 없어 과거 데이터에 대한 활용률이 저하되고, 데이터 작성시 표준적인 체계 미흡 등 실무 적용에 있어 효율성이 저하되고 있다. 건설 표준규격의 부재는 건설분야 정보화사업의 중복투자 및 건설정보의 사장 등 인적, 물적 손실과 함께 곽가 경쟁력 향상에 장애요인을 초래하는 등 많은 문제점이 야기되고 있는 실정이다. 최근 건설산업의 정보화로 건설 ERP의 개발이 활발하게 이루어지고 대기업을 중심으로 건설 ERP의 적용이 확대되어 가고 있는 실정이나 건설 표준규격의 미흡으로 정보 공유 및 재활용에 어려움을 겪고 있다. 따라서 정보 유통의 기반조성과 정보의 공동이용을 위한 통일된 건설정보 분류체계를 적용시킨 건설 ERP 설계가 필요하다. 본 연구에서는 건설표준ERP템플릿에 표준이 될 수 있는 규격코드과 프로세스를 제시하고 ERP템플릿시스템에 적용에 대하여 연구를 하였다.

• Magazine of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.18-21
• /
• 2015

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.383-386
• /
• 2011

본 논문에서는 철근콘크리트 구조물의 프레임부재 철근을 대상으로 배근 설계 및 철근 형상화 알고리즘을 구축하여 자동배근을 생성하는데 목적이 있다. 철근 콘크리트의 BIM 통합 설계 시스템은 철근 배근정보의 생성과 호환이 원활하지 않아 표준 정보 호환 체계가 구축되지 않은 실정이다. 기존 2차원 기반 프로세스에서는 철근 배근 설계에 있어 표준화된 기준에 따른 배근이 아닌 관행이나 일률적인 배근 지침에 따라 배근 상세를 정하고 있고, 2차원 배근 설계 결과만 제시하고 있어 상호 호환 가능한 철근 배근 정보데이터가 생성되지 않는다. 철근 콘크리트 구조에서의 철근 배근 정보를 생성하고 BIM 통합 구조 설계시스템에서의 정보 호환성을 확보하기 위해, 프레임부재 철근을 대상으로 구조 해석 데이터베이스와 통합 설계 플랫폼 간의 호환 시스템을 생성하고, 콘크리트학회 콘크리트 구조설계기준에 따른 배근 설계 및 철근 형상화 알고리즘을 구축하여 자동배근시스템(Integrated Reinforcement for Frame Members, 이하 IRFM)을 개발하는데 목적이 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.397-404
• /
• 2003

In this paper, we have analyzed the level of cross-modulation noise required for CDMA mobile station and proposed a guideline for optimum design. From the analysis, the level of cross-modulation noise is determined by the system's noise figure(NF) and VCO's phase noise and there is a trade-off relationships between them. In addition, we have determined the value of LNA's IIP3 and duplexer's isolation to satisfy the above level in designing the system. Therefore, this paper will give a guideline for a selection of components in designing cdma2000 mobile station.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2124-2130
• /
• 2014

The standard for DGPS reference station system defined by RTCM is in the current version of 1.2. This standard currently supports only GPS of the United States. However, the current operating GNSS satellite consisted of not only GPS, but also GALILEO of Europe, GLONASS of Russia, QZSS of Japan, BeiDou of China and so on. Therefore, the existing standard is not able to support them. Accordingly, a new standard in the version of RTCM's RSIM 1.3 is established in order to provide correctional services to GNSS satellites. In this paper, the version of RSIM 1.3 is analyzed and the software for DGNSS reference station architecture supporting the version of RSIM 1.3 is designed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.821-827
• /
• 2023

In this study, the aircraft technical standards of the Korea and the United States were analyzed to derive the dynamometer test procedure required to prove the compatibility for flight test certification of the metal brake pad for transport aircraft. Since the design modification of the brake systems is classified as a major change, the STC(Supplemental Type Certificate) and the PMA(Parts Manufacturer Approval) are required. In accordance with the TSO-C135a, the technical standard order for brake system in the United States, the design landing-stop test, accelerate-stop test, and most severe landing stop test were selected among the test items for flight test. The conditions for the dynamometer test are determined according to the specifications provided by aircraft manufacturer, and the brake pad condition, deceleration, and the number of test are defined according to the TSO-C135a.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.52-66
• /
• 2017

This study aims at designing standard metadata that can be incorporated for advanced utilization of damage prediction maps, and thereby constructing the standard meta-information management prototype system on the basis of the proposed design. Based on the ISO/TC 211 19115 international standard, which is considered as the most widely used standard (as per the results of a domestic and foreign metadata standard survey), the designing process for the standard metadata was established and the metadata was categorized into nine classes. Additionally, based on the output of the standard metadata design process, a standard meta-information management prototype system, capable of checking and downloading meta-property information, was constructed using the JAVASCRIPT language. By incorporating the obtained results, it is possible to maintain the quality of the constructed damage prediction map by establishing a standardized damage prediction map database. Furthermore, disaster response can be actuated through the provision and management of data for effective operation of the proposed damage prediction system.