• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.34-39
• /
• 2015

Fluorescent whitening agents (FWAs) are widely applied in the papermaking process to improve the CIE whiteness and the ISO brightness of papers. Large amounts of FWAs are used in the paper and paperboard industry, but no standard method exists for quantitative FWA analysis. Therefore, a new method is needed to analyze the presence of FWAs in paper and paperboard to control their additions and applications. In particular, FWA analysis must concentrate on those used for surface treatment of paper because their use in surface applications has increased recently. The purposes of this study were to measure the optical properties of papers surface-treated with oxidized starch containing FWAs and to deduce the regression equations for the quantitative analysis of FWAs used for surface treatments. Surface sizing was carried out to treat the surface of a base paper with T-FWA and H-FWA, and the pickup weight of the surface sized paper was measured to determine the real weight of FWAs transferred onto the paper surface. After surface sizing and preconditioning, the paper was evaluated for CIE whiteness, ISO brightness, fluorescence index, and reflectance at 440 nm using an Elrepho spectrophotometer. The CIE whiteness and the ISO brightness increased linearly as FWA content increased. The fluorescence index and the reflectance showed linear relationships with T-FWA and H-FWA. Linear regression equations were determined for the quantitative analysis of FWAs used for surface treatments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.89-103
• /
• 2020

A frizz hair is referred to the fly-away hairs that have become bulky or deviated from the regular hair and the cause of that is not clear known. The internal lipids are related to the physical properties of hair such as elasticity and tensile strength and interracial studies have previously conducted to relate the lipid mass and Afrikaan hair, which has a lot of frizzy hair. Although washing hair is the only way to control the hair loss without damage of hair surface, the number of washing and lipid loss are not linearly correlated. In this study, the amount of lipid hair was analyzed by washing the hair with a few different types of shampoos containing various conditioning polymers and oils of different polarities. The results confirmed that the higher the polarity of the oil, the higher the lipid content. This method was applied to Indian frizzy hair to evaluate the degree of frizziness and found that the frizzy volume was more severe for a hair with less lipids. On the other hand, the frizzy hair volume of fly-away hairs was observed more broadly for the hairs with higher lipid contents. In addition, the friction on the surface of the hair did not differ due to the oil treatment. Taken together, it was concluded that hair frizzing was affected by the amount of lipids in the hair rather than by the adhesion between the oils. Thus, this study suggests that controlling the lipid contents in hair may be an important solution in the development of hair anti-frizzy technology.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.14-22
• /
• 2006

the basic model of chemical reactor using glow discharge, we used cathode discharge cell with vacant cavity in the middle. Currently glow discharge is widely studied as a radiation source or atomization device in atomic spectroscopy and remarkable technological achievements are made through the graft with other analysis devices such as microanalysis and steel analysis.1 Additionally, as the characteristics of basic glow discharge and radiation have been reviewed many times, those results could be used in this experiment.2-3 In 1993, an article regarding the treatment of poisonous gas in the air using low temperature plasma was published. According to this article, if DC Glow Discharge is used under continuous atmospheric flow, poisonous gases such as SO2 and NO can be removed.4 Based on those findings, we designed highly efficient reactor where stable air plasma is composed and all air flow pass the negative glow area passing through the tube. It was observed that the cathode tube type glow discharge developed in this study would be economical, easy to use and could be used as radiation source as well.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.193-200
• /
• 2008

Statement of problem: There have been a few studies about unsplinted implant retainted maxillary overdenture. Purpose: The purpose of this study was to examine the effect of different position of implant for 2 implants-retained maxillary overdenture. Materials and methods: Three-dimensional finite element models were used to reproduce an edentulous human maxilla with an implant-retained overdenture. Two implants in the canine tooth positions on both side and in the second premolar tooth positions on both side models were examined. Axial loads of 100 N were applied to the occlusal surface at the right first molar tooth positions. Maximum stress at the implant-bone interface and stress at the cortical bone surface just under the loading point were observed. Results and conclusion: Within the limits of this study, maximum stresses were concentrated around implant of canine position at loading side. The second premolar area was thought to be more favorable to distribution of stress on mucosa, alveolar bone and implants than canine area for maxillary overdenture.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.97-101
• /
• 2011

Interplanetary space between Sun and Earth is area of flowing very fast solar wind which is contained X ray, flare, corona mass, etc. occurred Sun surface to Earth. This solar wind is affected directly to Earth magnetosphere and ionosphere so that this bring out broadcasting and communication interruptions, satellite operation obstacles and power gird defects and etc..Solar wind flow in interplanetary space is measured as solar wind speed, density and direction by measuring scintillation value to be produced during radio source is passed through solar wind. The wider effective collective areas and the more radio sources, accuracy of solar wind measuring is got higher. Function test was performed using 3 tiles which was manufactured as prototype. Restriction of quantity of tiles, test was performed to confirm whether measured beam pattern is complied with requirement or not. In this paper, it is shown design and their specification of ground interplanetary radio measurement system as well as technical issues and resolutions which were raised during design phase. Also result of function verification test using prototype is suggested. It is confirmed that measured beam pattern was met with requirement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.334-338
• /
• 2006

This study was conducted to evaluate the effect of improvement of soil physical properties such as deep plowing, subsoil breaking and diagnostic fertilization on the yield of rice and nitrogen-use efficiency in direct seeding on flooded paddy surface of rice. The effects of deep plowing, subsoil breaking and diagnostic application of N, P, K fertilizers, Latex coated urea(LCU), compost, silicate were investigated. The soil physical properties, such as bulk density, hardness and porosity were improved and the content of organic matter and available $SiO_2$ were also increased by deep plowing and subsoil breaking. The amount of $NH_4-N$ in soil was highly increased by diagnostic fertilization and deep plowing at 5th leaf stage. The nitrogen-use efficiency was the highest at the diagnostic application of LCU 70% applied as basal dressing with subsoil breaking. The yield of rice increased by 8% under the diagnostic application of LCU 70% applied as basal dressing with subsoil breaking compared with the conventional application.

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.98-105
• /
• 2021

In this study, we prepared a silver nanoparticle transferable adhesive composition with transparency and adhesive properties using UV-curable urethane acrylate containing silane groups. The urethane-based adhesive composition was applied between the Ag/PET film in which silver nanoparticles were patterned on PET and the PC film to be transferred. Immediately after UV-curing with UV, PET was removed to complete the manufacture of Ag/PC film. UV-curable urethane acrylate containing silane groups was synthesized using polycaprolactone diol (PCL), isophrone diisocyanate (IPDI), 2-hydroxyethyl methacrylate (HEMA), and (3-aminopropyl) triethoxysilane (APTES). The silane group of APTES can improve interfacial adhesion by reacting with the specially treated silver nanoparticle surface of the Ag/PET film. In addition, we improved the adhesion between silver nanoparticle and PC film by mixing UV-curable urethane acrylate containing a silane group and a functional acrylic diluent used as a diluent. We analyzed the synthesis process of urethane acrylate using FT-IR, and compared the adhesive properties, optical properties, and transfer properties according to the molar ratio of APTES and the acrylic diluent composition. As a result, the best transfer properties were confirmed in the adhesive composition prepared under the conditions of PUA2S1_0.5.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.130-137
• /
• 2019

Precast concrete (PC) structure is one of the type of the structures which is made in a facility prior to installing it to a construction field. The contact surfaces between two PC structures should be treated for obtaining enough binding force by inducing prestressing force. However, in the many cases, the contact surface causes the crack and leakage of water. These cracks and water leakage can cause the corrosion of the rebar, and the corrosion of the rebar can severely reduce the long-term durability. In this study, the SMA wire connector is suggested to solve the problem with the contact surfaces between two PC structures. The pull-out resistance of the suggested SMA wire connector is evaluated by conducting the tests to find the effect of the number of wires, shape of connector part, and shape memory effect. As a result of this study, the empirical formula is suggested to estimate the pull-out resistance related with the effects of the shape of the connector, shape memory effect, and the adhesive force. The validity between the estimated pull-out resistance and the measured value is confirmed.

• The Korean Journal of Archival Studies
• /
• no.32
• /
• pp.45-78
• /
• 2012

The significance of Presidential Impeachment in 2004 is subject to interpretations in many different contexts, but its nature as its justice was the constitutional trial by the nation's impeachment system. This study set out to compare and analyze the understanding of the event centered around its nature as "an impeachment event as a public activity" and the records related to it. For that purpose, the study attempted to analyze the impeachment event to understand it as a public activity and examined and analyzed the records of the impeachment event in the public domain through personal visit, phone interview, and request of information disclosure based on the analysis results. An impeachment event as a public activity can be understood as an activity carried out by the National Assembly, which is to issue a motion for impeachment under the norms of the nation's impeachment system, and Constitutional Court, which is responsible for impeachment trial, through their unique rights prescribed in the Constitution. The important subjects of such a public activity included the accused president, the acting presidential system created by the motion for impeachment, and the National Election Commission that provided a decisive ground for impeachment. It was confirmed that the records, which are legal requirements, were well created and have been preserved and managed in the public domain. However, it was difficult to conclude that the records of the impeachment event were thoroughly created in terms of content in relation to affairs as they mainly covered the superficial treatment processes and the results of explicit activities. There was, in particular, the absence of records showing the context of activity.