• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.8
• /
• pp.553-561
• /
• 2017

The main motivation for this study was to establish a CFD-based procedure for the analysis of heating characteristics, particularly in industrial furnaces. As certain open-source software packages have gained popularity in dealing with complex industrial problems, the OpenFOAM framework was selected for further development of advanced physical models to meet industrial requirements. In this study, the newly developed comprehensive model was applied to simulate physical processes in the full-scale horizontal furnace of a continuous galvanizing line (CGL). The numerical results obtained indicate that the current approach predicts heating characteristics reasonably well. It was also found that radiative heat transfer plays a dominant role in heating the moving strip. To improve the predictability of our method, further work is required to model the turbulence-chemistry interaction realistically, as well as to impose a physically correct thermal wall boundary condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.418-422
• /
• 2005

The degradation of IPA according to coating conditions was examined by $TiO_{2}$/p-25-coated aluminium metal plate. Inorganic(KR-400), inorganic$\cdot$ organic hybrid(TMOS) and organic(A-9540) resins were used as binder $TiO_{2}$ coated surface of aluminum metal plate was clear with all binders, and the adhesion of binders was good except inorganic binder. The activity for IPA degradation appeared to range in order A-9540>TMOS>KR-400. The optimum activity was obtained when the ratio of TMOS and P-25 was 1.6:10, and when the ratio of A-9540 and P-25 was 1.0:6.0, respectly.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.246-255
• /
• 2016

When spring of the suspension is exerted by an external load, a car should be designed to prevent predictable damages and designed for a ride comfort. We used experiments design to design VON-MISES STRESS and K, a constant, of spring of suspension which is installed in a car as a goal level. We analyzed the result from Edison's Elastic - Plastic Analysis SW(CSD_EPLAST) by setting D, d, n as external diameter of coil, internal diameter of coil, the number of total coil respectively. The experiment design let the outcome be as Full-second order by using Box-Behnken which is one of response surface methods. Experimented and analyzed results based on the established experiments design, We found out design parameter which has desired VON-MISES STRESS and the constant K. Additionally, we predicted life time of when the external load was exerted by repeated load by using fatigue equation, and verification of plastic deformation has also been made. Additionally we interpreted a model, which is formed by optimized design parameter, with linear analysis and non-linear analysis, at the same time we also analyzed plastic deformation with the values from the both models. Finally, we predicted fatigue life of optimized model by using fatigue estimation theory and also evaluated a ride comfort with oscillation analysis.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.273-278
• /
• 1985

A carrier-supported mycelial growth of Penicillium chrysogenum was applied to penicillin fermentation system. Among various materials tested, celite was found to be most effective for both spore adsorption and bioparticle development. Hyphal growth through pore matrices of the material showed strong anchorages and provided highly stable biofilm growths. When 5-10％ celite was employed, both cell growth and penicillin production were observed to increase significantly comparing to the dispersed filamentous growth. Specific productivity of penicillin, however. was found to be kept almost constant at a value of 1,900 unit/g cell/hr. A semicontinuous fermentation in a fluidized-bed reactor. using the tarrier-supported biofilm growth, was conducted successfully although free mycelia appeared in the late phase of the fermentation made the reactor operation difficult. Control of the size of bioparticles was considered as a major operating factor to maintain the reactor productivity at a desired level.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1073-1079
• /
• 2009

The proper orthogonal decomposition (POD) method can identify principal modes that optimally capture the energy content from large multi-dimensional data set. In this study unsteady pressure fields on the rotor blade surface of a helicopter in forward flight are expressed by a reduced order model based on the POD method. Special modes containing high energy are analyzed to investigate the aerodynamic characteristics in more efficient way. The CFD simulation of flowfields around helicopter rotor blade in hovering motion is also conducted to validate its prediction with experimental result. In the process 7 modes containing energy ratio 99% from 240 snapshots information are identified and utilized to construct a reduced order model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1302-1307
• /
• 2006

This study describes the preparation of high-performance photocatalyst and its environmental applications. We prepared visible-light response nano-particle photocatalyst exhibiting the similar photocatalytic activity with $TiO_2$, dispersed $TiO_2$ on $SiO_2$ with an active rutile type titanium oxide prepared at low temperature. The binder and stable photocatalytic $TiO_2$ sol for photocatalytic system were also prepared. Such products were evaluated by UV/Vis spectrometer, X-ray diffraction analysis, SEM, measurement of photocatalytic activities and surface area, mechanical properties of $TiO_2$-coated surfaces. The results obtained can be applied in efficient photocatalytic systems using POF and metal plate for the purification of air.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.181-191
• /
• 2016

In geological storage of $CO_2$, the behavior of $CO_2$ is influenced by pore network of rock. In this study, the drilling cores from Pohang Basin were analyzed quantitatively using three-dimensional images acquired by X-ray micro computed tomography. The porosities of sandstone specimens around 740 m-depth (T1), 780 m-depth (T2) and 810 m-depth (T3) which were target strata were 25.22%, 23.97%, 6.28%, respectively. Equivalent diameter, volume, area, local thickness of pores inside the sandstone specimens were analyzed. As a result, the microstructural properties of T1 and T2 specimens were more suitable for geological storage of $CO_2$ than those of T3 specimens. The result of the study can be used as input data of the site for decision of injection condition, flow simulation and so on.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.943-950
• /
• 2014

This paper presents a numerical study conducted for analyzing the effect of the Prandtl number on natural convection in a square enclosure with an inner circular cylinder in various positons. Several Prandtl numbers (Pr = 0.1, 0.7, and 7) and Rayleigh numbers (Ra = $10^3$, $10^4$ and $10^5$) are considered in the numerical study, along with different positions of the inner circular cylinder. The position of the inner circular cylinder is changed in steps of 0.1 in the range of -0.2 to 0.2. The effect of the Prandtl number on natural convection in the enclosure is analyzed on the basis of the thermal and flow fields and the distribution of the Nusselt number. Regardless of the position of the cylinder, when the Rayleigh number is $10^5$, the surface-averaged Nusselt number of the inner cylinder and the enclosure increases as the Prandtl number increases.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2016

Spray dried $Cr_2O_3$ powder having an agglomerated structure of particles was twice treated into a plasma flame to increase its apparent density. The powder subjected to the first densification treatment did not show the entirely melted state keeping inner particle hollows, and it was fully melted after the second processing only. The powder size as a result of the second treatment decreased, and the apparent density as well as flowability were increased due to melting and surface smoothing effects. But a part of particles after the second densified treatment showed the hollow structure, especially those which were above $30{\mu}m$ in size. This densification behavior of the powder has been qualitatively discussed in terms of the thermal conductivity and inner gas pressure within aggregates exposed to the plasma flame.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.174-174
• /
• 2015

국내의 국지성 집중호우와 같은 기후변화와 토지피복율 증가 등 복합적인 원인으로 인한 표면 유출수의 증가로 도시에서의 내수침수가 매년 빈번하게 발생하고 있다. 이러한 도심지 돌발홍수로 인한 피해에 대한 구조적인 대책으로 지하방수로가 효과적인 방안으로 대두되고 있으며, 현재 신월빗물저류배수시설이 설계단계에 있다. 그러나 미국, 일본 등의 국외의 기설치된 지하방수로에서 발생되는 Geyser 현상으로 인한 피해에 대한 연구는 국외에 비해 미비한 편이므로, 선행적으로 Geyser에 대한 물리기반의 동수역학적인 이해가 필요한 실정이다. Geyser는 홍수 시 급격한 유량의 유입으로 단파가 발생하여 지하방수로 내 공기의 압축이 발생하고 수직관을 통해 공기가 물과 함께 지상으로 분출되면서 발생된다. 따라서 공기와 물의 혼합 유동을 모의해야 하며 동시에 단파의 불연속성을 모의하기 위해서는 기존의 상용프로그램으로는 다소 어려움이 있다. 이에 본 연구에서는 지하방수로의 Geyser 현상의 발생 예측을 위해 1차원 Saint-Venant 방정식을 지배방정식으로 선정하였으며, 단파 발생을 수치적으로 안정적으로 모의하기 위해 Roe Approximate Riemann 수치기법을 사용하였다. 또한 공기의 압력항을 고려하기 위해서 수정된 형태의 Preissmann slot 모형을 적용하였다. Geyser 현상의 영향인자로서 지하방수로 수평관의 직경, 마찰계수, 바닥경사, 초기수위, 유입유량을 고려하였으며 상류에서 유입되는 유량에 의한 하류에서의 동수역학적 거동을 분석하였다. 5개의 영향인자의 변화에 따른 단파의 유입속도 및 공기부 압력의 변화를 관찰하여 Geyser 현상에 대한 동수역학적 검토를 수행하였다. 추후 본 연구결과를 적절히 활용한다면 지하방수로의 사용 안정성을 확보하고, 홍수발생 시 모니터링 인자도출에 도움이 될 것으로 예상된다.