• Korean Journal of Plant Taxonomy
• /
• v.33 no.4
• /
• pp.411-420
• /
• 2003

To examine the seed morphology in Korean Orobanchaceae, seeds of 5 species including 1 variety in five genera and one related taxon, Boschniakia himalaica Hook. f. & Thomson in Hook. f. from the Himalaya (7 taxa in total) were investigated by scanning electron microscopy (SEM). Two different seed types are recognized depending on three characters (e.g, .the seed size, seed coat structure and seed number per fruit). - Type I: size less than 1mm, seed coat structure reticulate and seed number per fruit more than ca. 1,000; Type II: size more than 1 mm, exotesta irregularly crested and seed number per fruit less than 1,000 (Lathraea japonicu Miq.). In Type I, three subtypes of exotesta internal surface pattern can also be classified; (1) Subtype Ia: reticulate - include irregularly striate (Ia') and deeply reticulate (Ia"), (2) Subtype Ib: foveolate, (3) Subtype Ic: smooth. Systematics application of the seed morphological data for the Korean Orobanchaceae is also briefly discussed.

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.159-165
• /
• 1999

Structural, magnetic and magnetoresistance behavior of NiFe/Ag multilayers prepared by a magnetron sputter under an Ar and $Ar/H_2$ atmosphere was studied. It was difficult to make a uniform multilayer by using an Ar atmosphere. However, the uniform multilayers could be fabricated by using an $Ar/H_2$ atmosphere. This was thought to be due to decrease in the energy of the sputtered atom and Ar content of the film. Typical magnetoresistance behavior of the discontinuous NiFe/Ag multilayers appeared when the uniform multilayer was formed and annealed. Substrate temperature did not improve the uniformity of the multilayers. Above 20$0^{\circ}C$ of the substrate temperature, the films were almost formed into granular alloys rather than multilayers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.89-89
• /
• 2000

AlN 박막은 Al과 N원자의 부분적 이온결합 특성을 가진 공유결합을 한 육방정계의 wurtzite 경정구조의 화합물 반도체로서, III-V족 반도체 중 가장 큰 에너지 갭(6.2 eV), 결정 구조적 이방성, 화학 양론적 결합구조, 높은 탄성종과 전달속도(약 10$\times$106 m/s)와 높은 열전도도, 고온 안정성, 가시광성.적외선 영역에서의 좋은 투과성과 높은 굴절률, 상온 대기압에서의 유일하게 안정적인 특성을 가지고 있어, 절연재료, 내열재료, 저주파 영역 센서의 압전 트랜스듀서, 광전소자, 탄성파 소자 및 내환경 소자, MIS소자 등으로 주목받고 있다. 본 연구에서는 BAW 공진기의 활용을 목적으로 반응성 마그네트론 스퍼터링 방법으로 AIN 압전박막을 제작하여, 증착 조건-질소 농도, 고주파 출력, 전체 스퍼터링 압력, 기판 온도-에 대한 박막의 특성을 조사하였다. AlN 박막의 c축 우선 방위 결정성 및 낮은 투과성, 적당한 굴절률의 특성이 BAW 공진기의 활용을 위한 요건이므로, 각각의 증착 조건하에 제작된 박막은 XRD의 $\theta$/2$\theta$ 스캔 회절상에 의한 결정성의 분석과 우선 성장 결정면의 rocking curve 및 XRD로 측정한 FWHM과 표준 편차로 결정성의 배열성과 소자 응용가능성을 조사하였다. 박막의 표면.단면 미세 구조 및 평활도는 SEM으로 관찰하였으며, Al-N 결합 상태는 XPS와 FT-IR로 분석 조사하였다. 제작된 AlN 박막의 결정성 분석 결과, c축 우선 방위 성장을 위한 스퍼터링 압력에 대한 임계 질소 농도와 임계 스퍼터링 압력이 관찰되었다. 전체 스퍼터링 압력이 6~8 mTorr의 범위에서 나타난 최소 임계질소 농도는 10%, 최대 임계 질소 농도는 60%이며, 4 m Torr 이하 10 m Torr 이상의 전체 스퍼터링 압력에서 박막의 우선 방위성장이 제재된다. 이는 AlN 박막이 형성에 관여하는 질소 이온 양의 충분한 형성에 필요로 하는 질소 가스의 유입량에 따른 것으로 판단된다. AlN 박막의 c축 결정면인 (002) 결정면의 성장을 유도하며 다른 방향으로의 성장을 제어하여 소자 활용에 유용한 박막을 제작하기 위한 고주파 출력은 300W 정도가 적당하며, 기판을 가열하지 않았을 때 낮은 투과도를 나타낸다. 본 연구에 의한 BAW 공진기 활용을 위한 AlN 압전박막의 제작을 위한 최적 증착 조건은 기판의 가열 없이 6~8 mTorr의 전체 스퍼터링 압력에 20~25%의 질소종도, 300W의 고주파 출력이다. 최적 조건에서의 AlN 박막은 약 0.19$^{\circ}$의 FWHM과 약 0.08$^{\circ}$의 표준편차를 가지며, 균일하고 조밀한 표면 미세구조와 주상정 구조의 측면구조, 파장에 대한 약 2.0의 굴절률, 낮은 투과도와 화학 양론적 구조를 가지는 우수한 박막이 형성되었다.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.3
• /
• pp.255-270
• /
• 2003

Pollen morphology of four genera (Daphne L. - 4 spp., Edgeworthia Meisn. - 1 sp., Wikstroemia Endl. - 2 spp., and Stellera L. 1 sp.), except 1 taxon (Diarthron Turcz. - 1 sp.) in Korean Thymelaeaceae were examined with light (LM) and scanning electron microscopy (SEM). The size of grains ($11.3-60.0{\mu}m$) are varied from small (in Stellera) through medium (in Daphne and Wikstroemia) to large (in Edgeworthia). All studied taxa have monad, spheroidal, pantoporate (10-20) grains. The exine is reticulate, especially a typical "croton pattern" which is comprising rings of more or less trihedral subunits. Each triangular subunit is topped by a single microspinule, and the surface pattern is psilale. In Daphne, three types of subunit arrangement can be recognized; - (1) Type I : subunits are arranged circles and attached to each other or sometimes fused in part, (2) Type II: each subunit is trihedral and isolated distinctly, and (3) Type III: each subunit is isolated, but somewhat vague. Systematic implication of the present pollen data for the Korean Thymelaeaceae is also briefly discussed.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.218-222
• /
• 2000

W-Ti film properties for X-ray absorber applications have been investigated with Ti composition have been investigated with Ti composition variation. W-Ti films were deposited by DC magnetron sputtering system. As the working pressure increases, film density decreases and film stress changes from compressive to tensile. The transition pressure (where the film stress in zero) and the stress gradient decrease by adding Ti into W-Ti(6.5 at.%) film shows the smallest stress gradient and transition pressure. It also shows high density ($17.7g/\textrm{cm}^3$) similar to that of pure-W ($17.8g/\textrm{cm}^3$) at the transition pressure. All the films show columnar structure, and its size decreases with increasing Ti composition. Surface roughness and thermal stability are improved by Ti-addition, resulting in a better property for X-ray absorber applications.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.127-134
• /
• 2013

The vascular endothelial cells are the inner layers of blood vessels. It regulates the function of blood vessels and proliferation of vascular smooth muscle cells. Poly(lactide-co-glycolic acid) (PLGA) is a biodegradable synthetic polymer with a well-controlled degradation rate and an acceptable mechanical strength. It can be easily fabricated into many shapes. Silk consists of 18 amino acids. It found important for attaching cells cultured in vitro, and maintaining cell functions. In this study, we fabricated silk/PLGA biomaterial hybrid films of 0, 10, 20, 40 and 80 wt% silk. We performed MTT, SEM, ELISA, and immunocytochemistry analyses. We confirmed the adhesion and the proliferation of HAECs on silk/PLGA according to the content of silk, and 40 wt% silk/PLGA hybrid films have superior adhesion and proliferation properties. These results demonstrate that silk/PLGA hybrid films provide suitable surfaces for HAECs, and there is the effect of silk on cell growth and proliferation.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.4
• /
• pp.369-379
• /
• 2015

The seed morphology of 25 taxa (8 genera) of Alsineae (Alsinoideae, Caryophyllaceae) in Korea was examined using stereo (SM) and scanning electron microscopy (SEM) in order to evaluate their diagnostic values and taxonomic implications. Circular, comma-shaped, ellipsoid, ovate, pyriform, reniform, and sub-circular seed shapes were identified. The seeds of the examined taxa range from 0.28 to 4.10 mm in length and from 0.33 to 3.10 mm in width; the smallest one was found in Sagina japonica, while the largest was in Honkenya peploides var. major. A hilar appendage was found in Cerastium, Honkenya, Moehringia, and strophioles were only observed in the genus Moehringia. Based on the examination of epidermal cells of the seed surface, four micromorphological types can be distinguished, viz., the colliculate-papillate (Col-Pap), colliculate-columellate (Col-Cll), colliculate-simple (Col-Sim), and smooth (Sm) types. Descriptions of the testa shape, margin, and the degree of elevation of the anticlinal cell walls, and the outer periclinal cell walls are summarized for the tribe. Taxonomic implications of the seed micromorphological characters were also discussed, in comparison with an earlier taxonomic system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.97-106
• /
• 2000

In these respects the purpose of this research is manufacturing Co-W-P alloy thin film on the corning glass 2948 by electroless plating method using $NaH_2PO_2H_2O$ (sodium hypophosphite) as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction occurred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of 8$0^{\circ}C$. Also magnetic characteristics was found to be most excellent at the pH of 9 and the temperature of 7$0^{\circ}C$, resulting in the coercive force of 870Oe and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was 0.216$\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand, (1010), (0002), (1011) orientation of hcp for $\alpha$-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-W-P alloy thin film, coercive force was 500Oe and squareness was 0.6. For crystal orientation, (0002) orientation of $\alpha$-Co was dominatly found. Then we could confirm the formation of perpendicular magnetization. The content of P was constant at 0.8$\pm$0.2% and the content of W increased as the concentration of Na$_2$WO$_4$increased. When the concentration of Na$_2$WO$_4$was 0.1mol/L, the composition of W was 20%. We observed the changes of magnetic characteristics and microstructure of thin film depositions of Co-W-P by the heat treatment. For heat treatment, the temperature was increased step by step to 10$0^{\circ}C$, 20$0^{\circ}C$, 30$0^{\circ}C$, and 40$0^{\circ}C$ and it took 1 hour at each step in the reductive condition of hydrogen gas. By the heat treatment, flatness of surface was improved, but there were no changes on the magnetic characteristics and the microstructures.