• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.57-60
• /
• 2006

The instability analysis of submerged gas flow into liquid is studied, which assumes gas and liquid as viscous and irrotational. At low mass flow rate of gas, injected gas plume is collection of bubbles, and increase of gas flow rate makes plume as a jet. It is well known that the transition from bubbling to jetting occurs in the transonic region. But previous works neglect viscous effect of gas flow into liquid. This paper concerns about an application of viscous potential flow theory in cylindrical gas flow into liquid. The growth rate versus wave number and mach number is compared with various condition including inviscid and viscous flow.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.241-246
• /
• 2001

Vortices terminating at free surface have been investigated extensively. Most of investigations, however, are focused on surface parallel vortices and little has been known about surface normal vortex or columnar vortex. Visualized experimental results utilizing LIF technique are discussed for the purpose of characterization of columnar vortex interacting with a clean and a contaminated free surfaces and a solid body interface in the present investigation. The results reveal that surface tension changes due to surface contamination although bulk viscosity remains constant and eventually the behavior of a columnar vortex interacting with a contaminated free surface and a solid body interface are totally different from the clean free surface case.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3033-3038
• /
• 2007

In this research, Rayleigh instability of gas-liquid flow in annular pipe is studied in film boiling using viscous potential flow. Viscous potential flow is a kind of approximation of gas-liquid interface considering velocity field as potential including viscosity. A dispersion relation is obtained including the effect of heat and mass transfer and viscosity. New expression for dispersion relation in film boiling and critical wave number is obtained. Viscosity and heat and mass transfer have a stabilizing effect on instability and its effect appears in maximum growth rate and critical wave number. And the existence of marginal stability region is shown.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.57-62
• /
• 1992

탄성 유체 윤활은 윤활 표면의 탄성변형이 중요하게 다뤄지는 윤활의 형태로, 주로 로울러 베어링이나 기어와 같이 선접촉 집중하중을 받는 기계요소와 관련이 많다고 할 수 있다. 역사적으로 볼때 탄성 유체 윤활은 20 세기에 들어서 윤활 분야에서 획기적인 발전을 해온 것 중의 하나라고 볼 수 있으며, 윤활상태의 폭넓은 해석 뿐만아니라 전에는 고려하지 못했던 큰하중을 받는 기계요소들에 대한 윤활상태를 규명하는데 지대한 역할을 할 수 있음을 시사하고 있다. 한편 오래전 부터 실험적으로 탄성유체윤활을 해석함에 있어서 우선 고전적인 Reynolds 윤활 방정식에 윤활제의 유성특성인 고압하에서의 점성의 압력 의존성이 대단히 큰 피에조 점성효과를 고려하지 않으면 안된다. 나아가 등점도 조건하에서 재료의 탄성 변형을 함께 고려하여 연립 방정식의 형태로 구성해서 피에조 효과에서 발생하는 강한 비선형성을 갖는 대수 방정식의 해를 구하는 방안을 강구해야 한다.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.96-100
• /
• 1996

In order to improve the permeability of the homogenous membrane of poly(carbobenzoxy-L-lysin)(PCLL), which has very high selectivity of helium gas to nitrogen gas, asymmetric porous membranes of PCLL were prepared by casting from 20% solutions in dioxane and dimethylformamide(DMF), respectively. The membranes were characterized by measuring the number of the pores, the pore size distribution of the surface(the skin layer) and the thickness of the skin layer by scanning electron microscope and transmission electron microscope. The mean pore size and the pore density were lower for the membrane cast from dioxane than that from DMF, which was explained by the mechanism of the formation of the pores in the asymmetric porous membrane. The permeability coefficient observed could be roughly explained by the viscous flow through the skin layer. However, the selectivity observed was against the theory of the viscous flow.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.70-76
• /
• 1997

수치격자의 크기제한에 의한 자유표면 유동해석 문제를 효율적으로 다루기 위하여 자유표면의 모든 격자를 x 방향으로 4,8,12개로 등분할 하고, y 방향으로는 4개로 잘라서 계산하였다. 이중격자 또는 삼중격자로 Navier-Stokes 방정식의 각항에 크기가 다른 격자를 사용해 효율을 향상시키는 계산방법의 연장으로, 본 논문에서는 자유표면 방정식에 보다 세분화된 격자를 적용해, Marker Particle 이동 및 자유수면 형성에 효율향상을 줄수 있는 수치방법을 도입하였다. 계산결과에 의하면 초기사용 격자가 coarse한 경우가 본방법의 효과가 커짐을 알 수 있고 대상물로는 층류유동에서 Wigley모형과 낭류유동의 S103 모형이다.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.465-470
• /
• 2002

For measuring friction-factor of artificially-roughened surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. the measurement of leakage and pressure distribution through round-hole pattern specimen with different hole area is described and a method is discussed for determining the friction-factor experimentally. Results show that the friction-factor of the round-hole pattern surfaces is bigger than that of smooth surface and increases as increasing the hole area. A empirical friction factor model for round-hole pattern surface is defined as the Moody's friction factor formula.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.3 s.20
• /
• pp.15-20
• /
• 2003

For measuring friction factor of artificially-roughened surfaces which are usually applied to damper seals, flat plate test apparatus is designed and fabricated. The measurements of leakage flow and pressure distribution through round-hole patterned specimen with different hole areas are described, and a method is discussed for determining the friction factor experimentally. Results show that the friction factor of the round-hole patterned surface is bigger than that of smooth surface, and increases as increasing the hole area. A empirical friction factor model for the round-hole patterned surface can be descrived by the Moody's friction factor formula.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.304-307
• /
• 2008

Two-dimensional Stokes flow due to the line source and line sink of same strength in semi-infinite flow region with free surface is analysed using complex variable theory and conformal mapping. Surface tension effects are included while gravity is neglected. From the results of analysis, flow pattern and free surface shape are obtained and velocity distribution on the free surface is determined with 2 independent parameters Ca (capillary number) and h (non-dimensionalized distance between source and sink). When the location of the sink is above the source, velocity on the free surface converges and a cusp occurs on the free surface for the value of Ca above some critical capillary number.

• Journal of the Korean Society of Visualization
• /
• v.9 no.3
• /
• pp.44-50
• /
• 2011

In this study, we propose a method for characterizing fluid-mechanical properties of a fluid surface, such as surface dilatational and shear viscosity, by matching the flow visualization and the numerical simulation for a Stokes flow in a three-dimensional cavity. The surface flow is driven by shear stress exerted on the free surface by an external gas flow. The external gas flow is simulated by using a commercial code, while the Stokes flow is calculated by an in-house code. We have found that the surface flow is very sensitive to the surface tension and other properties. The qualitative feature of the surface flow can be reproduced by the parameter tuning.