• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.218-224
• /
• 2004

The adhesion and proliferation of mammalian cells on polymeric biomaterials depend on the surface characteristics such as wettability, chemistry, charge and roughness. In order to recognize the correlation between the adhesion and proliferation of human bone marrow derived stem cells (BMSCs) and surface property, radio frequency generated plasma treatment on low density polyethylene (LDPE) has been carried out. The modified LDPE surfaces were characterized by measuring the static water contact angle. The adhesion and proliferation of cells on LDPE films were characterized by cell counting and reverse transcription-polymerase chain reaction (RT-PCR). The water contact angle of the film surface decreased with plasma treatment time. Proto-oncogenes (c-myc, c-fos) and tumor suppressor gene (p153) showed maximum expression with contact angle of 60 ∼ 70$^{\circ}$ range of LDPE film. By cell counting, we confirmed that the rate of cell proliferation appeared the higher on the film surface of the contact angle of 60∼70$^{\circ}$ We concluded that the surface wettability is an important role for the growth and differentiation of BMSCs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.212-212
• /
• 2007

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.22-22
• /
• 2020

너도개미자리는 석죽과의 다년생 초본류로 낭림산 이북으로부터 백두산까지 분포하며 고지대에 자생한다. 7~10월에 흰색의 꽃이 개화하고 종자는 달걀모양으로 표면은 밋밋하다. 본 연구는 지피용으로 사용할 너도개미자리의 분화재배 시 적정 추비, 차광 및 적심 등의 처리 정도를 알아보고자 수행하였다. 재배방법의 확립을 위하여 유용식물증식센터에서 종자를 분양받아 2019년 4월 19일에 트레이에 파종하여 충북대학교 유리온실에서 육묘한 유묘를 7월 4일에 정식하여 실험재료로 사용하였으며, 9월 24일까지 약 11주 동안 재배하였다. 공통 조건은 비닐 포트 3치(7×7cm)에 원예상토를 충진하고 200구 트레이에 셀당 1립씩 파종하여 생산된 1셀을 정식하였다. 추비, 차광, 적심 등은 무처리로 수행하였다. 추비실험은 hyponex 하이그레이드(N-P-K, 7-10-6)를 0, 500, 1000, 2000mg·L^-1의 농도로 엽면시비 하였고, 차광 실험은 0, 35, 55, 75% 차광막을 이용하였으며, 적심은 무적심과 재배 4주차의 1회적심 처리로 구분하였다. 연구의 결과, 너도개미자리는 추비처리 농도가 증가할수록 생육도 증가하는 경향이었으나, 유의성은 확인할 수 없었다. 유의적인 차이는 없었지만 2000mg·L^-1 처리구에서 지상부 및 지하부의 생체중이 가장 무거운 결과를 보였다. 차광처리 별로는 무차광 조건에서 생육이 왕성한 결과를 보였고, 차광률의 증가는 생육을 점차 억제하는 경향이었다. 개화율도 무차광에서 가장 높았으며, 다음으로 35% 차광 순이었고, 55와 75% 차광에서는 개화가 진행되지 않았다. 너도개미자리에 적심처리는 초장과 측지수의 발생을 억제하였고, 개화도 지연되는 경향을 보였다. 결론적으로 너도개미자리의 지피용 재배시 광이 충분한 에 배치하여 재배하는 것이 효과적이다. 추비는 Hyponex 하이그레이드를 2000mg·L^-1의 농도를 처리하는 것이 생육에 유리하며, 적심은 하지 않는 것이 효과적인 재배방법인 것으로 판단된다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.50-50
• /
• 2011

발수가공은 섬유표면에 낮은 표면에너지 물질을 도포하여 섬유제품에 적심 저항성을 부여하는 것으로 일반적인 방법으로는 불소계 고분자 물질을 포함한 가공제액을 부여하고 열에너지원을 사용하여 섬유 표면에 경화하여 고착시키고 처리온도는 $150{\sim}170^{\circ}C$의 범위에서 수 분 처리하지만 처리시간을 증가하면 섬유에 황변을 일으킬 수 있고 직물의 한 면에만 발수성을 구현하기가 어렵다. 피부와 접촉하는 부위에서의 불필요한 발수성은 땀 흡수저하, 알러지 발생 우려 등 쾌적성 저하 요인이 될수 있어 스포츠, 레저 의류 분야에서는 섬유제품의 일면만을 발수처리 하는 가공이 필요되어진다. 편면 발수가공을 위한 선행기술로는 상하 중 하나의 롤러에만 발수제를 묻혀 섬유제품의 일면에만 발수가공을 하는 것과 분사기로 발수제를 섬유제품의 일면에 도포하는 것 등이 있다. 하지만 일면에 처리된 발수제가 반대면으로 침투하거나 균일한 발수처리가 되지 않는 등의 문제점이 있고 발수제의 농도증가 및 증점제를 사용하여 점도를 증가시켜야하기 때문에 발수처리의 균일성 및 내구성 있는 편면발수공정이 어려운 단점이 있다. 본 연구에서는 UV경화가 가능한 불소계 발수제와 물에 용해되는 광개시제가 첨가된 수용액을 PET직물에 패딩하고 UV로 경화하여 양면 모두 발수성을 부여한 후 UV조사로 표면개질하여 표면친수성을 증가시켜 양 면의 발수성을 조절하였다.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.869-876
• /
• 2000

In order to improve the cell-compatability of poly(L-lactide-co-glycolide) (75 : 25 by mole ratio of lactide to glycolide, PLGA) surfaces, the physicochemical treatments have been demonstrated. Chemical treatments were 70% perchloric acid. 50% sulfuric acid and 0.5 N sodium hydroxide solution and physical methods were corona and plasma treatment. The water contact angle of surface treated PLGA decreased from 73$^{\circ}$ to 50~60$^{\circ}$, i.e., increased hydrophilicity, due to the introduction of oxygen-containing functional group onto PLGA backbone by the measurement of an electron spectroscopy for chemical analysis. It could be observed that the adhesion and growth of fibroblast cell on physicochemically treated PLGA surfaces, especially perchloric acid treated PLGA surface, were more active than on the controt. In conclusion, it seems that surface wettability as hydrophilicity of PLGA plays an important role in cell adhesion, spreading and growth.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.7-13
• /
• 2009

The effects of 0.1g/dl nonionic surfactant solutions on liquid wetting and retention properties of wool fabric are reported. The 10 different nonionic surfactants (Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, 85), wool cloth (EMPA 217), and wool soiled cloth (EMPA 107) are used in the study. Both EMPA 217 and 107 have water contact angle($\Theta$)>$90^{\circ}$, which indicates that water spreading over a fabric surface and penetration into the fabric rarely occur. However, EMPA 217 and 107 are easily wetted with perchloroethylene(PCE) having very low values of $\Theta$'s and high values of liquid retention. Water wetting properties are greatly improved by adding nonionic surfactants into the system. Generally, hydrophilic surfactants which have low number of carbon atoms or unsaturated hydrophobic structures are effective in improving water wetting of wool fabrics. The water retention of EMPA 217 and 107 in surfactant solutions have positive relations with $cos{\Theta}$, adhesion tension, and work of adhesion. 40.3% pore volume of EMPA 217 and 26.1% pore volume of EMPA 217 can be filled with water even when we assume $cos{\Theta}=1$ (${\Theta}=0^{\circ}$).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1153-1159
• /
• 2003

The effects of changing aqueous solution properties by nonionic surfactants on wetting behavior and water retention properies of hydrophobic PET (polyethylene terephthalate) fabric were reported. The aqueous solution properties were diversified by mixing and diluting two nonionic surfactants, i.e., sorbitan monolaurate (Span 20) and polyoxyethylene(20) sorbitan monolaurate (Tween 20). The surface wetting properties ($cos{\theta}$) of PET fabric were greatly improved by adding $10^{-1}g/dl$ Tween 20 and further improved by mixing Span 20 to the system. The water retention properties (W) of PET fabric were also greatly increased by addition of $10^{-1}g/dl$ Tween 20. In diluted surfactant systems, the $cos{\theta}'s$ were increased with decreasing surface tension of aqueous liquids. The ratios of aqueous liquid retained in the pore structure to liquid retention capacity (W/H) were also increased with decreasing surface tension, however, W/H values were dramatically increased right after critical micelle concentration (cmc). The existence of micelles was important for the retention of aqueous liquids in the fabric. The critical surface tension of PET fabric used was found to be 28.7dyne/cm.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.177-184
• /
• 1998

The contact angle on powder hydrophobic polymer PMMA(polymethylmethacrylate), PVC(poly vinyl chloride) and hydrophilic metal aluminium was measured by wicking method on the base of Washburn equation for water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol, methanol, and for anionic surfactant SDS(sodium dodecyl sulfate) and cationic surfactant CATB(cetyl trimethylamonium bromide) aqueous solution with concentrations. The values of ${\gamma}_c$ estimated by Zisman plot and adhesion tension plot for contact angle with organic liquids, SDS, and CTAB aqueous solutions were 43.5, 28.3, and $36.2mNm^{-1}$ for PMMA and 44.2, 25.0, and $34.8mNm^{-1}$ for PVC, respectively. From the results, it was considered that wettability and characteristics of solid surface were transformed by adding surfactant. The surface free energy, ${\gamma}_s$ and its components of PMMA, PVC, and aluminium were determined using harmonic equation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.433-439
• /
• 2007

The effects of nonionic surfactants on detergency and water wetting/retention properties of soiled cotton cloths were reported. Two different soiled cloths were used. soiled cotton cloth 1 was made in the lab. with carbon black, tripalmitin, n-dodecane & palmitic acid on Korea Apparel Testing & Research Institute(KATRI) cotton testcloth and soiled cotton cloth 2(EMPA 101) was purchased from Testfabrics, Inc., USA. The following nonionic surfactants; l.e., Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, & 85, were used in the study. The water retention ratio(W/H) values of soiled cotton cloths were decreased, whereas the water contact angle values of soiled cloth were not changed markedly compared with those of unsoiled testcloths. The wetting and water retention of soiled cotton cloth 1 was improved with addition of nonoinic surfactants. The surfactants which have more hydrophilic characterictics or unsaturated hydrophobe tails were effective in improving wetting and water retention properties of soiled cotton cloth 1. The water contact angle values of soiled cotton cloths were extremely low with Span 20, presumably due to the high adsorption density or the surfactant. The detergency of soiled cloths were low in Span 20 and high in Tween 20, 40, 60 & 80 0.1g/dl surfactant solutions. Nonionic surfactants having higher ethylene oxide contents resulted in better detergency. In the range studied, the wetting and water retention of soiled cotton cloths did not show any particular relation to the detergency, whereas the surfactant characteristics, especially HLB values, influenced the detergency of soiled cotton cloths.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.448-457
• /
• 2002

Heat treatment such as quenching of a high-temperature cylinder is being used on steel to produce high strength levels. Especially, the mist cooling with the high and uniform surface heat flux rate s expected to contribute for better products. The experimental mist cooling curve is produced for better understanding, and two distinct heat transfer regions are recognized from the cooling curve produced. It is shown that the liquid film evaporation dominated region follows the film boiling-dominated region as decreasing the temperature of test cylinder by mist flow. Based on the intuitive view from some previous investigations, a simplified model with some assumptions is introduced to explain the mist cooling curve, and it is shown that the estimation agrees well with our experimental data. In the meanwhile, it is known that the wetting temperature, at which surface heat flux rate is a maximum, increases with mass flow rate ratio of water to air ($\varkappa$ < 10). However, based on our experimental data, it is explained that there exists a critical mass flow rate ratio, at which the wetting temperature is maximum, in the range of 3 < $\varkappa$ < 130. Also, it is described that despite of the same value of $\varkappa$, the wetting temperature may increase with mist velocity.