• Title/Summary/Keyword: 표면습도

Search Result 236, Processing Time 0.047 seconds

The Frost and Defrost Performances of Fin-and-Tube Heat Exchangers with Different Surface Treatment Characteristics (서로 다른 표면특성을 갖는 핀-관 열교환기의 착상과 제상 성능평가)

  • 최봉준;황준현;신종민
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.14 no.10
    • /
    • pp.781-785
    • /
    • 2002
  • The effects of different surfaces on dry and wet frosting test were experimentally investigated. The results of experiment were compared by the performance evaluation coefficient (PEC). Results showed that the air-side pressure drop of lacquer coated evaporator increased by 5% as compared to the plasma treated one. It was also found that the Plasma coated evaporator is lower than lacquer coated one in the PEC ratio.

A Study on the Adoption of optimum Construction Method to prevent Condensation on the wall of Underground Parking Lot in Apartment Project (공동주택 지하주차장의 벽체(壁體) 표면결로방지(表面結露防止)를 위한 적정 공법 선정에 관한 연구)

  • Oh, Kil-Hwan;Lee, Il-Jae;Kim, Sung-Gyu
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2007.11a
    • /
    • pp.101-104
    • /
    • 2007
  • Currently most of underground structures in domestic apartment projects are being designed for parking lot and essential parking area is growing due to the increase in car-holding number per household. Moreover, most underground parking lots of today are combined with basement, therefore a pleasant environment in underground space is strongly needed for the dwellers' use. However, there always occur high percentage of humidity and surface condensation in underground parking lot because of the nature of underground structure and they are having a bad influence on the comfort and health of dwellers. Therfore, this study is planned to compare and examine the porformance and properties of currently used construction methods to prevent condensation and finally present the most suitable method.

  • PDF

Hygroscopic characteristics and changes of quality attributes for composite seasoning with relative humidity (복합조미료의 상대습도에 따른 흡습특성 및 품질변화)

  • Kim, Hyun-Ku;Jo, Kil-Suk;Moon, Kwang-Deog;Park, Mu-Hyun
    • Applied Biological Chemistry
    • /
    • v.35 no.3
    • /
    • pp.186-190
    • /
    • 1992
  • Composite seasoning was stored at the temperature of $40^{\circ}C$ and $50^{\circ}C$, the relative humidity of 11, 32, 57, 65, 75 and 95% without any packaging. The moisture content reached to equilibrium state within short period below 57% RH, but it increased rapidly above 65% RH. The hygroscopic characteristics of compoposite seasoning was similar to each temperature and the amount of absorbed water was decreased at the higher temperature. The optical density due to browning development was increased above 57% RH during storage. L and b value of composite seasoning was decreased according to the increase of temperature and relative humidity. Palatibility of color, taste and flavor, and caking of composite seasoning was sharply decreased above 57% RH during storage.

  • PDF

Humidity Dependence of Electrical Conductivity of Vacuum Evaporated Au Films on Glass (유리표면에 진공증착된 금박막의 전기전도도의 습도 의존성)

  • 이동영;박현수
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.6
    • /
    • pp.572-578
    • /
    • 1987
  • The vacuum evaporated Au films on soda-lime glasses were measured by the electrical conductivity with the variation of the annealing time, relative humidity, and temperature. Au films structures were observed by scanning Electron Microscope and X-ray Diffractometer. As the annealing time and temperature increased, the electrical conductivity was increased due to the migration or annihilation of defects, but the electrical conductivity was decreased as with the relative humidity increased. Au films by XRD and SEM examination showed the negligible effect of chemical reactions.

  • PDF

A study on Dyeing Properties and Washing Fastness of Polyester microfiber (해도형 극세사 편성물의 염색성 및 세탁견뢰도에 관한 연구)

  • 이기훈;김성동
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2001.10a
    • /
    • pp.71-74
    • /
    • 2001
  • 폴리에스테르 섬유는 섬도가 가늘어질수록 전체 표면적이 증가하므로 염색시 초기 염색속도가 빨라져 불균염의 원인이 되며, 겉보기 염착량은 감소하여 많은 염료를 사용해야 된다. 그래서 해도형 초극세 폴리에스테르 섬유는 레규라 폴리에스테르보다 세탁견뢰도 및 습마찰견뢰도가 현저히 저하하게 된다[1-3]. 또한 초극세 폴리에스테르 섬유는 환원세정을 하더라도 마무리 열고정이나 가공시에 가해주는 열로 인해 열이행이 많이 일어나는 것이 세탁견뢰도를 저하시키는 원인으로 지적되고 있다[4, 5]. (중략)

  • PDF

Corrosion resistance of gallium-doped zinc oxide film depending on the hydrogen content (수소가스 함유량에 따른 Gallium-doped Zinc Oxide(GZO) 박막의 내식성 평가)

  • Jo, Su-Ho;Choe, In-Gyu;Kim, Sang-Ho
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2016.11a
    • /
    • pp.188-188
    • /
    • 2016
  • GZO 박막은 상업적으로 사용되는 ITO를 경제적으로 대체할 수 있는 유망한 투명 전도 물질이며, 인체에 무해하고, 공급이 쉬우며, 화학적으로 안정하다. 특히, CIGS와 같은 광전변환 소자 전극에서는 부식 저항이 매우 중요한데, 습한 환경에서 견뎌낼 수 있다는 장점이 있다. GZO는 3가 갈륨이 2가 아연에 도핑된 n타입의 반도체 물질이다. 그리고 육각형의 황화아연 물질의 전기 전도도는 산소 결핍에 매우 의존한다. GZO의 수소는 산소 결핍 집중에 영향을 끼친다. 따라서 이 연구에서는 RF 마그네트론 스퍼터링 실험 동안 수소 함유량을 다양화 시키고, 면 저항, 광 투과도, 부식저항의 효과를 조사한다. 수소량이 증가할수록, 면 저항은 향상되어지고, 특정 지점을 넘으면 감소한다. 분극 실험에 의해 측정되어진 부식 저항은 박막의 미세조직과 결정립계의 특성에 더 의존되어진다. 훨씬 더 많은 수소를 함량한 비정질이 부식 저항성에 있어서 유효한 차이를 나타내지 못하는 동안 결정 내에서 많은 수소를 지닌 작은 결정의 결정립계는 낮은 분극저항, 즉 낮은 부식 저항성의 결과를 도출한다.

  • PDF

The Study of Performance Evaluation Coefficient of Fin-and-Tube Heat Exchangers with Frosting (착상을 수반한 핀-관 열교환기의 성능평가계수에 관한 연구)

  • 최봉준;황준현;신종민
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.15 no.2
    • /
    • pp.132-136
    • /
    • 2003
  • For the study of performance evaluation on different shape heat exchangers that have the same energy consumption in a refrigerator, we make performance evaluation coefficient (PEC) which can distinguish performance of different shape heat exchangers. The results were reported in order to compare with for the dry frosting and wet frosting test as various definition of PECs. Results showed that PEC of dry frosting test is higher than that of wet frosting test because attached water droplet increases pressure drop of air-side then this decreases performance of heat exchanger.

Study on tests on interfaces and connection of end fitting of composite insulators (복합 애자류의 수분침투시험평가기술에 대한 고찰)

  • Kim, Geun-yong
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1171-1172
    • /
    • 2015
  • 송전선이나 전기기기의 나선(裸線)부분을 절연하고 동시에 기계적으로 유지 또는 지지하기 위한 절연체와 이것과 일체로 조립된 금구류로 구성된 절연지지물인 애자는 전기적으로 충분한 절연내력을 가지게 하기 위하여 다수의 주름을 만들어 표면에 따른 거리를 크게 한다. 이는 표면이 습하였을 때, 염분이나 먼지 등이 부착하였을 때 절연내력이 저하되는 것을 방지하는 데 효과가 있다. 그리고 재질별(세라믹, 유리, 합성수지 등), 모양별(원판형, 원주형, 중공, 갓형 등), 용도별(전차 선로용, 발전소 또는 변전소용, 통신 선로용 등) 및 사용방법(현수용, 내장용, 인류용, 고정용 등)에 따라 다양하게 분류된다. 본 논문에서는 복합 애자류(composite insulators)의 여러 가지 성능평가 시험방법 중에서 복합 애자의 여러 계면과 연결 금구의 접속부(interfaces and connections of end fittings)에 대한 이상 유무를 확인하는 시험인 수분침투시험평가기술에 대해 고찰하였다.

  • PDF

Damp-heat 시험에 의한 유기태양전지 단위층 열화특성연구

  • Kim, Min-Ji;Park, Seong-Hwak;Sin, Hyeon-Jin;Kim, Seong-Hyeon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.317.1-317.1
    • /
    • 2013
  • 유기 태양전지는 다른 무기계 태양전지에 비해 물질 자체의 쉬운 가공성과 유연한 특성으로 차세대 플렉시블 태양전지로 각광받고 있지만 상대적으로 짧은 수명으로 상용화에 걸림돌이 되고 있다. 현재까지 알려진 유기 태양전지의 짧은 수명의 원인으로는 수분과 산소에 의한 광활성층의 화학적 열화 및 표면의 변화, 전극의 열화, 전자-전공 수송층의 흡습현상 등이 있다 [1]. 본 연구에서는 이러한 이론적인 열화 메커니즘에 기초하여 일정한 수분과 산소 분위기에서 각 단위층들이 열화되는 현상을 광학적, 화학적 분석을 통해 짧은 수명의 원인을 밝혀내고자 한다. 유기 태양전지의 가혹시험은 $85^{\circ}C$의 온도와 85%의 습도 조건에서 이뤄졌으며, 가혹시간에 따른 열화현상 비교를 위해 0, 50, 100, 250, 500 h 동안 시험을 진행하였다. C-O, C=O 결합 형성에 의한 광활성층의 ${\pi}$공액의 변형은 FT-IR(fourier transform infrared spectroscopy)과 XRD (X-ray diffraction) 측정을 통해 분석하였고 변화된 표면 형상은 FE-SEM (field emission scanning electron microscopy) 측정을 통해 관찰하였다.

  • PDF